Page 1 of 2
Assembly Instruction Sheet
Night Stand with USB Port
Parts List
Part
A1 Pc.
B
Top Set
Shelf
Description
1 Pc.
Hardware
Part Description
Screw JCB M6 x 30RF10052 12 Pcs.
RF40170 1 Set
RF40103
USB Port
Knob
Allen Key
1 Pc.
C
D
Left Panel
Right Panel
USB Adapter Specifications
Input Voltage AC 100-240V 50/60Hz
Input Current ≤ 350mA @ 220V A C w/ full load
Output Voltage 5.0V ± 0.25V
Load Regulation -0.5% (Max)
Output Current 3.1A Max
Output Ripple < 400mV p-p
Efficiency > 75% @ 220V AC
Output Plug USB Type A x 4
Over Power ≈ 17W @ 220V AC
Short Protection Auto Recovery
1 Pc.
1 Pc.
Page 2 of 2
D
A
RF10052
Diagram 1.
Step 2.
Attach Left Panel (C) and Bottom Shelf (B)
into the Top Set (A) and Right Panel (D)
using 8 Screws (RF10052) as per Diag. 2.
Step 1.
Invert the Top Set (A) on a soft surface.
Attach Right Panel (D) into the Top Set (A)
using 4 Screws (RF10052) as per Diag. 1.
RF10052
B
C
D
A
A
C
D
B
Diagram 3.
Step 3.
Upright the unit and attach
Knob (RF40170) into the drawer
as per Diag. 3.
RF10052
Diagram 2.
RF40170
Step 4.
Attach supplied AC cable from underneath the
table and plug into a standard wall outlet.
Unit is now ready to accept the supplied 3-in-1 cable.
*After multiple devices are charged simultaneously, please disconnect
them in the reverse order.
USB 1 & 2 PORTS
ii GG
ON
12 34
OFF
Fast charging ports for devices
that require higher current,
ideal for iPads and Android
tablets, while also compatible
with other mobile devices.
USB 3 & 4 PORTS
Standard USB ports, ideal for
smartphones and other mobile
devices.
Loading...