Page 1
ASSEMBLING
G
Fig 1.1
ASSEMBLING
ASSEMBLING
ASSEMBLING &
&
INSTALLATION
&
INSTALLATION
& INSTALLATION
INSTALLATION INSTRUCTIONS
For
Wall
For
Wall
For
For Wall
Wall Mount
Mount
Mount
Mount Light
INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS
Light
Light
Light Fixture
Fixture
Fixture
Fixture
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .
MOUNTING
MOUNTING
MOUNTING
MOUNTING THE
Installation
Installation
Installation
Installation (see
1. Disconnect power at main electrical panel before installation.
2. Thread the two mounting screws about 1/4 ” into the pre-drilled
holes in the mounting plate, spaced about the same distance apart as
the holes in the fixture back plate. Attach the mounting plate to the
junction box using two junction box screws . The side of the
mounting plate marked “ GND ” must face out.
3 . Guide fixture wires through hole in center of mounting plate.
4 . Place the fixture body ( D ) over the mounting plate , aligning the
holes with mounting screws, then screw the ball nuts( E ) onto
the mounting screws .
5. Attach the harp(C) to the cover of lamp holder, place the center ring of
the shade (B) over the threaded end of the harp (C) and lock it securely
with finial ( A ) until su n g .
6. Mount the short back plate (F) to the wall with the plastic anchors
and the wood s crew , feed the fixture wires into the short back
plate, then attach the long back plate(G) to the short back plate.
7.
If
you
7.
If
you
7.
7. If
If you
you not
Take
Take
Take
Take out
f
ollow
f
ollow
f
f ollow
ollow wiring
8 . Install the light bulbs in accordance with the fixture ’ s
specifications. DO
WATTAGE
WATTAGE
WATTAGE
WATTAGE RATING!
THE
FIXTURE
THE
FIXTURE
THE FIXTURE
FIXTURE
(see
fig.1)
(see
fig.1)
(see fig.1)
fig.1)
not
need
not
not need
out
out
out fixture
wiring
wiring
wiring instructions
assembly
need
assembly
need assembly
assembly the
fixture
fixture
fixture wires
wires
wires
wires nuts
instructions
instructions
instructions carefully
DO
DO
DO NOT
RATING!
RATING!
RATING!
the
fixure
the
fixure
the fixure
fixure lamp
nuts
of
nuts
of
nuts of
of the
carefully
carefully
carefully .
NOT
EXCEED
NOT
EXCEED
NOT EXCEED
EXCEED THE
lamp
,
lamp
,
lamp ,
, please
the
back
the
back
the back
back plate
.
(see
fig.2
.
(see
fig.2
. (see
(see fig.2
fig.2 and
THE
THE
THE MAXIMUM
please
pause
please
pause
please pause
pause and
plate
,
plate
,
plate ,
, then
and
fig.1.1
and
fig.1.1
and fig.1.1
fig.1.1 )
MAXIMUM
MAXIMUM
MAXIMUM
then
then
then
and
and
and
)
)
)
F ig.1
Wiring (see fig.2)
1.Connect the electrical wires as follows. Connect the
Black wire from the fixture to the black house (hot)
Wire. Connect the white wire from the fixture to the
white (neutral) house wire. Make sure all wire nuts are
secured.
tape. If your outlet box has a ground wire (green or bare
copper) connect fixture’s ground wire to it. Otherwise
attach the bare copper fixture wire to the green ground
screw on the circular str a p.
2.Tuck the wire connections neatly into the wall junction
box.
You
may wrap the connections with electrical
Fig. 2
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
White
(Neutral)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
Green or
Bare Copper(Ground)
U
L
R
Listed
Loading...