Label Picture Description QTY (pc)
A Chair Backrest 1
B
Chair Base With
Footrest
1
C
Power Cord with
transformer
1
Assembly Instructions
Caution : You must read this before you proceed
Power Recliner Chair
Parts List
Page 1 of 6
D Right Wing 1
E Left Wing 1
Step 1
Assembly Steps
Parts Introduction
This product has multiple parts and may require up to some 30 minutes to assemble. To give you an
overview of the product parts, the above picture is to help you put the various parts into perspective.
Please read through the instructions below to familiarise yourself with the parts and steps before
assembly.
Assembly Preparation
Before Beginning
Assembly:
Right Wing (D)
Left Wing (E)
D
E
Page 2 of 6
Step 2
Step 3
Step 4
Step 5
Go to find the motor connector under the bottom of the seat
Connect the joint from the motor and the Power Cord(C) , fix the draw-ingear after connected.
Smooth down the fabric flap on the Chair Backrest(A).
Run your hands down both sides of the flap,from top to bottom,allowing the velcro tape to adhere to the
flap under the seat of the Recliner Chair.
Take out 2 non-woven bags with two Wings inside from the bottom of the armrest. Then take out the
Wing from non-woven bag.
Position the Chair Backrest(A) on it's right side.
Align the mounting brackets of the Left Wing(E) with those on the left side of Chair Backrest(A).
Then slide Left Wing(E) forward by hand to make sure it locks into the position as shown in the picture.
Repeat the above to Right Wing (D).
Take out the small carton box and open it to take out the Power Cord with transformer (C).
With assistance from your adult partner, hold up the fully assembled Chair Backrest(A), standing behind the Chair.
Insert the small metal arms on the sides of the Chair Backrest(A)into the prefabricated slide lock gadget on the Chair
Base with Footrest(B)as shown above.
Firmly but gently, push the Chair Backrest(A)downwards until the Backrest(A) is fully slotted and locked into position.
B
C
B
C
Page 3 of 6
Step 6
Step 7
Step 8
Make sure all parts are connected and securely locked into position.
Plug into a socket into position on the wall or any other place.
Now your Recliner Chair is ready for use.
Disassembly Note:open the flap on the Chair Backrest(A),use a screwdriver(Donยดt use fingers) pressing
outward on the metal ear on the preattached Metal Bracket on one side of the Chair Base(B),with
assistance of you adult partner to keep the Chair Base(B) in place,pull out the Chair Backrest(A) upward
at the same time,repeat the same step for another side.Then the Chair Backrest(A) can be taken out.
Force apart the draw-ingear , then separate the joint from the motor and Power Cord(C).
B
C
Page 4 of 6
Do not allow children to play on the chair.
Always leave the chair in an upright and closed position after use.
Keep hands and feet clear of the footrest mechanism and any gaps.
Just open it or close it with the button of switch
Don't sit any armrest of chair.
To get into a open position-To press the front button of switch.
Sit into the seat.
The Chair Backrest will fall down and footrest will open when press the front button of switch A,the Chair
Backrest by your back.So do must put your feet on footrest well when you press the front button of switch
on the outside of right armrest until into a fully reclined position.
User Instructions.
Push Back Chair
Please read the Instruction Manual below carefully before use.
Supervise children,when in use of this Power Recliner.
Tilt your body weight slightly forward and upwards.
The seat back will come up to an upright position.
Use your finger to press the hind button of switch on the outside of right armrest.
The Recliner Chair will close smoothly until into a fully upright position.
To get out of chair-move Seatback into Upright Position:To press the hind button of switch B.
Page 5 of 6
Page 6 of 6
Loading...