Page 1
ASSEMBLY INSTRUCTIONS
PAGE 1 OF 6
King Bed
Page 2
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 20 MINUTES
PARTS IDENTIFICATION
A
B
C
D BED RAIL
E
F CENTER RAIL
HEADBOARD
PANEL
LEFT
HEADBOARD LEG
RIGHT
HEADBOARD LEG
STORAGE
FOOTBOARD
1PC
1PC
1PC
2PCS
1PC
2PCS
CENTER RAIL
G
H FOOTBOARD LEG
I
SUPPORT WITH
LEVELER
ROLL SLAT
(8PCS)
6PCS
5PCS
1SET
PAGE 2 OF 6
Page 3
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
HARDWARE IDENTIFICATION
1
2
3
4
5
BIG ALLEN WRENCH
(M5 - BLK)
SMALL
ALLEN WRENCH
(M4- BLK)
FLAT HEAD SCREW
(M4 x 35mm - RBW)
BOLT 2
(M6 x 40mm - RBW)
BOLT 3
(M6 x 50mm - RBW)
1PC
1PC
28PCS
6PCS
4PCS
6
7
BOLT 1
(M6 x 30mm - RBW)
BOLT 4
(M6 x 70mm - RBW)
2PCS
5PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
PAGE 3 OF 6
Page 4
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
STEP 3
PAGE 4 OF 6
Page 5
ASSEMBLY INSTRUCTIONS
STEP 4
STEP 5
STEP 6
PAGE 5 OF 6
Page 6
ASSEMBLY INSTRUCTIONS
STEP 7
COMPLETE
PAGE 6 OF 6
Page 7
INNER SIZE: 76.77” X 80.31”
INNER SIZE OF DRAWER: 4.92” X 14.56” X 35.94”
73.43”
24”
42.50”
- 46.46”
12.40”
18.43”
71.65”
80.12”
10.04”
2.76”
6.89”-
10.83”
79.72”
83.86”
Note:Dimension tolerance +5%
Loading...