Red Barrel Studio W000543813 Installation & Assembly (Left)

Recliner Assembly Instructions
Your recliner comes packaged in one box.
DO NOT use any sharp objects to open plastic wrapped components as damage to product or components may result.
Carefully remove all of the components from the packaging and set aside for assembly. Assemble on a soft surface to prevent
scratching the finish.
Parts List
A
1 x Back
1 x Seat
B
2 x Connectors
C
*
1 x
D
Step 1
Loosely attach all bolts and nuts to the connector before fully tightening.
Wing
H
C
G
B
*
*
*
4 x Bolts
E
1 x
F
G
Front
Hex Key
4 x
Nuts
Assembly
Hardware List
H
B
*
Replaceable Parts
*
M6 x 14mm
M6 x 80mm
M6 x 24mm
Step 2
1 x Wrench
A
E
F
Step 3
D
Step 4
A
Your recliner style may differ from images. Care for your furniture by
periodically tightening all bolts using the included hex key.
About your furniture piece:
.
Softening of foam is natural and will happen over time with use.
.
Fabric will fade or discolor in direct sunlight. Minimize exposure to direct sunlight to extend the life of your furniture.
.
Wood grain, knots, streaks, and color variation occur naturally in wood and are not considered defects.
“Please note the lever is used to release the foot rest. Use your arms to recline all the way back. To close, please use your legs to push the foot rest down”
CAUTION: Tighten all components securely before use. Failure to do so may result in personal injury.
Loading...