Lift Recliner Assembly Instructions
- Your recliner comes packaged in one box.
- DO NOT use any sharp objects to open plastic wrapped components as damage
to product or components may result.
- Carefully remove all of the components from the packaging and
set aside for assembly.
- Assemble on a soft surface to prevent scratching the finish.
- Zip ties are used to secure your recliner cords and avoid damage - do not cut.
A
1 x Seat
B
1 x Back
Step 1
Parts List
*
*
*
A
1 x Power Kit
C
D
2 x Legs
4 x
E
Bolts
Assembly
M6 x 40mm
C
E
D
Hardware List
4 x Wing Nuts
F
*
4 x Lock Washers
G
*
Replaceable Parts
*
Hardware bag can be found
under the seat.
G
F
M6
M6
Step 2
Back
F
G
X 2
D
E
Assembly
Step 3
A
Step 4
B
C
Step 5
Hold the Up button to lift chair /
bring the recline position upright
Remote Use
Hold the Down button to recline /
bring lift position down
Proper Usage
Steps to safely stand up from your Lift Recliner
1. Store remote safely in the recliner’s side pocket
2. Plant feet firmly on the g
3. Evenly distribute weight on both arms of the chair
4. Slowly stand up f
*Remember to store remote safely
in the recliner’
when it is not in use
s side pocket
rom lift position
round
*Fabric will fade or discolor in direct sunlight. Minimize exposure to direct sunlight to extend the life of your furniture.
Improper Usage
DO NOT stand up when
the footrest is in the
upright position
DO NOT stand up from
your recliner with
uneven weight
DO NOT stand up from
your Lift Recliner with
one arm
Your recliner style may differ from images.
About your furniture piece:
.
Softening of foam is natural and will happen over time with use.
.
Fabric will fade or discolor in direct sunlight. Minimize exposure to
direct sunlight to extend the life of your furniture.
.
Wood grain, knots, streaks, and color variation occur naturally
in wood and are not considered defects.
CAUTION: Tighten all components securely
before use. Failure to do so may result in
personal injury.
Loading...