Page 1
36 '' ROUND SOLID FIXED TOP PEDESTAL TABLE
Thank you for purchasing t his quality product.Be sure to check all packaging material
carefully for small parts that may have come loose inside the ca rto n during shipment.
COMPONENT LIST:
FIGURE
DESCRIPTION
Hardware Bag
Table Top
Pedestal Stand
Pedestal Leg
Mounting Plate
Levelers
QTY
1 pce
1 pce
1 pce
4 pcs
1 pce
4 pcs
HARDWARE LIST:
PART NO
1
2
3
4
FIGURE
DESCRIPTION
Hex Nut
Lock Washer
Flat Washer
Wrench
QTY
12 pcs
12 pcs
12 pcs
1 pce
This product will take 15-20
minutes to assemble.
Reminders
1.Use only the hardware supplied.
2.Once the product is assemble,level and tighten all the bolts.
3.Do not over-tighten bolts.
4.This item may require periodic tightening
NOTE:
1.Two or two people are needed for assembly
2 please keep all hardware parts out of the reach of children.
Page 1 of 2
Page 2
36 '' ROUND SOLID FIXED TOP PEDESTAL
TABLE
ASSEMBLY :
STEP 1
-Turn the Pedestal Stand upside down on a soft protective surface. Attach Leg by inserting pedestal leg through per-drilled holes on
1.1
pedestal.
Flat Washer(3),Lock Washer(2),Hex Nuts (1)
-Use
1.2
-Repeat step 1.2 For the remaining pedestal legs Leg, once all pedestal leg been attached, turn the base assembly right side up.
1.3
Wrench
Wrench(4)
and
to attached the pedestal Leg to the pedestal stand.
Lock Washer
Flat Washer
Pedestal Stand
STEP 2
-Align and attach the table top to the base Assembly by inserting
Hex Nut
2.1
Wrench(4)
provided.
Pedestal Leg
Flat Washer(3),Lock Washer(2)
Hex Nut
Flat Washer
and
Wrench
Lock Washer
Hex Nut (1)
, tighten all nuts using
STEP 3
- Adjust the levelers until the table sits firmly.
3.1
Assembly is now completed.
Page 2 of 2
Pedestal Stand
Mounting plate
CARE INSTRUCTION
~ Be sure to use the same type of polish consistenly.
Your furniture will appear cloudy or streaky if oil
based or wax based polishes are interchanged.
~ Spray your furniture surface evenly. Wipe in a
circular motion with a soft clean cloth.
Loading...