INSTALLATION
White or
HOUSE
Black
WIRES
(Hot)
Smooth
FIXTURE
WIRES
Black or
Ribbed
WIRES
FIXTURE
Bare Copper(Ground)
FIXTURE
WIRES
Copper
(Ground)
HOUSE
(Neutral)
WIRES
White
Bare
Green or
WIRES
HOUSE
Listed
U
L
R
INSTALLATION
INSTALLATION
Wall
For
Wall
For Wall
Wall Mount
INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS
Mount
Mount
Mount Fixture
Fixture
Fixture
Fixture
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .
MOUNTING
MOUNTING
MOUNTING
MOUNTING THE
Installation
Installation
Installation
Installation (see
1. Shut off the power at the circuit breaker and remove old fixture,
including the single bar.
2. Thread the pipe screw part way into the center hole of the single
bar and secure with hex nut.
3. Attach the single bar to the junction box using two box screws .
The side of the single bar marked “ GND ” must face out.
4. Follow wiring instructions carefully (see fig.2)
5. Place the lamp body( B ) over the nipple then tighten it with the
ball nut ( A ) .
6. Raise the glass shade( C ) to bottom of the lamp holder , and
using the ring ( D) by turning it clockwise until tight .
7. Install the light bulb s in accordance with the fixture’s
specifications. DO
WATTAGE
WATTAGE
WATTAGE
WATTAGE RATING!
THE
FIXTURE
THE
FIXTURE
THE FIXTURE
FIXTURE
(see
fig.1)
(see
fig.1)
(see fig.1)
fig.1)
DO
NOT
DO
NOT
DO NOT
NOT EXCEED
RATING!
RATING!
RATING!
EXCEED
EXCEED
EXCEED THE
THE
THE
THE MAXIMUM
MAXIMUM
MAXIMUM
MAXIMUM
F ig.1
Wiring
Wiring
Wiring
Wiring (see
1. Connect the electrical wires as follows. Connect the
Wire. Connect the white wire from the fixture to the
white (neutral) house wire. Make sure all wire nuts are
secured.
tape.If your outlet box has a ground wire (green or bare
copper) connect fixture’s ground wire to it. Otherwise
attach the bare copper fixture wire to the green ground
screw on the single bar.
2.Tuck the wire connections neatly into the wall junction
(see
fig.2)
(see
fig.2)
(see fig.2)
fig.2)
black wire from the fixture to the black house (hot)
You
may wrap the connections with electrical
box.
Fig.2
Loading...