RECTRON P6KE100, P6KE12, P6KE120, P6KE12A, P6KE13 Datasheet

RECTRON

Back

SEMICONDUCTOR

TECHNICAL SPECIFICA TION

GPP TRANSIENT VOLTAGE SUPPRESSOR

600 WATT PEAK POWER 1.0 WATT STEADY STATE

FEA TURES

* Plastic package has underwriters laboratory
* Glass passivated chip construction
* 600 watt surage capability at 1ms
* Excellent clamping capability
* Low zener impedance
* Fast response time

Ratings at 25 oC ambient temperature unless otherwise specified.

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load,
For capacitive load, derate current by 20%.

TVS

P6KE

SERIES

DO-15

DEVICES FOR BIPOLAR APPLICA TIONS

For Bidirectional use C or CA suffix for types P6KE6.8 thru P6KE400

Electrical characteristics apply in both direction

MAXIMUM RATINGS

Peak power dissipation with a 10/1000uS (NOTES 1, FIG.1)
Steady state power dissipation at TL = 75oC lead lengths,
.375” ( 9.5 mm ) ( NOTES 2 )
Peak forward surge current, 8.3ms single half sine wave­superimposed on rated load( JEDEC METHOD ) ( NOTES 3 )
Maximum instantaneous forward voltage at 50A for

unidirectional only ( NOTES 4 )
Operating and storage temperature range

NOTES :

1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25oC per Fig.2.

2. Mounted on copper pad area of 1.6 X 1.6”( 40X40 mm) per Fig. 5

3. Measured on 8.3ms single half sine-wave or equivalent square wave duty cycle = 4 pulses per minute maximum.

4. VF = 3.0V max. for devices of V(BR) < 200V and VF = 5.0 Volts for devices of V(BR) > 200V.

(At TA = 25oC unless otherwise noted)

RATINGS

SYMBOL

P

PPM

P

D

I

FSM

V

F

TJ, T

STG

Dimensions in inches and (millimeters)

VALUE

Minimum 600

100

3.5/5.0

-65 to + 175

UNITS

Watts

Watts5.0

Amps

Volts

0

C

1998-8

RECTRON