RECTRON 1.5FMCJ91A, 1.5FMCJ91, 1.5FMCJ62, 1.5FMCJ6.8A, 1.5FMCJ6.8 Datasheet
...
RECTRON
SEMICONDUCTOR
TECHNICAL SPECIFICA TION
SURFACE MOUNT
TRANSIENT VOLTAGE SUPPRESSOR
1500 WATT PEAK POWER 5.0 WATT STEADY STATE
FEA TURES
* Plastic package has underwriters laboratory
* Glass passivated chip construction
* 1500 watt surage capability at 1ms
* Excellent clamping capability
* Low zener impedance
* Fast response time
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature unless otherwise specified.
TVS
1.5FMCJ
SERIES
DO-214AB
DEVICES FOR BIPOLAR APPLICA TIONS
For Bidirectional use C or CA suffix for types 1.5FMCJ6.8 thru 1.5FMCJ400
Electrical characteristics apply in both direction
MAXIMUM RATINGS
Peak Power Dissipation with a 10/1000uS ( Note 1,2, Fig.1 )
Peak Pulse Current with a 10/1000uS Waveform
( Note 1, Fig.3 )
Steady State Power Dissipation at TL = 75oC ( Note 2 )
Peak Forward Surge Current, 8.3ms single half sine wavesuperimmposed on rated load( JEDEC METHOD )( Note 2,3 )
Maximum Instantaneous Forward Voltage at 50A for unidirectional only
( Note 3,4 )
Operating and Storage Temperature Range
NOTES :
1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25oC per Fig.2.
2. Mounted on 0.31 X 0.31” (8.0 X 8.0mm) copper pads to each terminal.
3. Measured on 8.3mS single half sine-wave or equivaient square wave, duty cycle = 4 pulses per minute maximum.
4. VF = 3.5V on 1.5FMCJ6.8 thru 1.5FMCJ90 diveces and VF = 5.0V on 1.5FMCJ100 thru 1.5FMCJ400 devices.
(At TA = 25oC unless otherwise noted)
RATINGS
SYMBOL
P
PPM
I
PPM
P
M(AV)
I
FSM
V
F
TJ, T
STG
Dimensions in inches and (millimeters)
VALUE
Minimum 1500
5.0
100
SEE NOTES 4
-65 to + 175
UNITS
Watts
AmpsSEE TABLE 1
Watts
Amps
Volts
0
C
1998-8
RECTRON
Loading...