Rectorseal AG-3180E User Manual

IDEAL FOR COMMERCIAL PACKAGE UNITS, METAL/PLASTIC SECONDARY DRAIN PANS & PRIMARY PAN WITH TIME DELAY
The AquaGuard AG-3180E micro-electronic condensate sensor is mounted directly in the primary drain pan. The bonus secondary sensor features water detection LED and easily installs in the metal or plastic secondary drain pan.
Both sensors continuously monitor any condensate overflow in the primary and secondary drain pans and automatically shut off the system and activate an alarm if any overflow is detected.
Key Features
• Meets International Building Codes & Primary Pan Code Requirements
• Now with Time Delay: Up to 60 Seconds On
• 6 Feet of Both Plenum Rated Probe and Sensor Wire
• 5 Amp, 24 VAC Solid State Sensor with Patent Pending Smart SensorTechnology
• Switch Can Be Normally Open or Normally Closed
• Normally Open 4th Wire for Optional External Alarm, Digital Controller or Energy Management Systems
• UL 508 Approved
International Mechanical Code 307.2.3.1: “On downflow units and all other coils that do not have a secondary drain International Mechanical Code 307.2.3.1: “On downflow units and all other coils that do not have a secondary drain
or provisions to install a secondary or auxiliary drain pan, a water-level monitoring device shall be installed inside or provisions to install a secondary or auxiliary drain pan, a water-level monitoring device shall be installed inside
the primary drain pan. This device shall shut off the equipment served in the event that the primary drain becomes the primary drain pan. This device shall shut off the equipment served in the event that the primary drain becomes
restricted. Devices installed in the drain line shall not be permitted restricted. Devices installed in the drain line shall not be permitted
US Patent 7,744,395; 8,151,580; 8,151,621; 8,154,313; 8,169,314; 8,561,417; 8,578,770
US Patent 8,578,770
.” .”
IND. CONT. EQ.
25XE
UL 508
UL 2043
Product Code 96128
E-14
Loading...