RECREUS FilaFlex MEDIUM FLEX 95A Service Manual

RECREUS INDUSTRIES S.L. VAT: ESB54876479 C/PICO VELETA, 36 03600 ELDA (ALICANTE) SPAIN

[e-mail] www.recreus.com

tel: [phone]

Filaflex®MEDIUM FLEX 95A

Filaflex is a Thermoplastic Polyether-Polyurethane elastomer with additives
that allow high printability in FDM printers, Filaflex® has a remarkable
hydrolysis resistance, high resistance to bacteria and low temperature
flexibility properties in printed parts.

PHYSICAL PROPERTIES

TYPICAL VALUE

Test method

Density

1,15 g/cm³

ISO 1183-1-A

Hardness Shore A

95

ISO 7619-1

Elongation at break

540%

ISO 37

Tensile strength

55 Mpa

ISO 37

Abrasion loss

25mm³

ISO 4649-A

Flammability rating

HB

UL 94

PRINTING PROPERTIES

VALUE

Printing Temperatures

215-235°C

Printing Speed

20-40 mm/s

Hot-Bed temperature

40 °C

Optimal layer height

0,2mm

Minimal Nozzle diameter

0,3MM (0,4mm or higher recommended)

Rectraction parameters

3,5-6,5 mm (speed 20-160 mm/s)

RECREUS INDUSTRIES S.L. VAT: ESB54876479 C/PICO VELETA, 36 03600 ELDA (ALICANTE) SPAIN

[e-mail] www.recreus.com

tel: [phone]

FILAFLEX ® ORIGINAL MSDS

1. PRODUCT AND COMPANY IDENTIFICATION

1.1 TRADE NAME: FilaFlex®MEDIUM FLEX 95A

1.2 COMPANY DETAILS:

RECREUS INDUSTRIES S.L.

C/PICO VELETA, 36

03600 ELDA, (Alicante), SPAIN

Tel: [phone]

[e-mail] www.recreus.com

2. HAZARDS IDENTIFICATION

Not a product dangerous for health or the environment according to the definition of EC

directives

2006/121/EC or

1999/45/EC and their valid adaptations and derived national

regulations.

3. COMPOSITION/INFORMATION ON INGREDIENTS

Polyurethane Thermoplastic – 97% CAS: 75701-44-9

1

RECREUS INDUSTRIES S.L. VAT: ESB54876479 C/PICO VELETA, 36 03600 ELDA (ALICANTE) SPAIN

[e-mail] www.recreus.com

tel: [phone]

4. FIRST AIDS

1. General instruction: Change clothes impregnated with the product.

2. In case of inhalation: Supply fresh air. In case of disturbances, consult

a doctor.

3. After inhalation of decomposition products, breathe fresh air, rest,

seek medical help.

4. In case of skin contact: Wash with soap and water. Visit your doctor if

irritation continues skin.

5. After contact with molten product, cool rapidly with cold water. No

skin separating the solidified product. Call a doctor immediately.

6. In case of eye contact: Rinse opened eye for several minutes under

running water. If symptoms persist, consult a doctor. Remove contact
lenses, if present and easy. Continue rinsing.

7. If swallowed: Rinse mouth and drink plenty of water. Do not induce

vomiting. Consult doctor in case of persistent symptoms.

5. FIRE-FIGHTING MEASURES

5.1 Suitable extinguishing media: Water, Foam, Dry chemical

5.2 Burning releases carbon monoxide, carbon dioxide, oxides of
nitrogen and traces of hydrogen cyanide. In the event of fire
and/or explosion do not breathe fume.

5.3 Firemen must wear self‐contained breathing apparatus.

5.4 Do not allow contaminated extinguishing water to enter the soil,
ground‐water or surface waters.