RecorderGear B180W User Manual
www.recordergear.com
RecorderGear™ and respective logos are trademarks of
Teton Webstores LLC ©2016 ALL RIGHTS RESERVED
USER
MANUAL
1. Speaker
2. Microphone
3. USB power supply port
4. Micro SD card slot
5. Power On/Off
6. Recording Key: Stop/Start
video recording
7. Reset: To reset the B180W,
insert a pin into the reset
hole and hold for 10 sec.
8. Indicator Light:
- Blue LED solid: Connected
to external Wi-Fi
- Blue and Red LED flashing
at the same time: In App
mode
- Red LED solid: Wi-Fi setup
successful and B180W will
auto reboot
9. Camera: 128 degree wide
angle. It can be rotated 180
degrees manually
10. Bracket socket
11. Pocket clip
Features:
• 720P HD rotatable camera
• 128 degree wide angle camera
• Supports up to 64GB Micro SD card
• Rechargeable battery with a life of 3.5 hrs
• Charges and records simultaneously
• Remote Email/FTP/push alarm
notications
Whats Included:
• 720P HD portable Camera
• USB cable
• AC adaptor
• Mounting Bracket
A. Insert micro SD Card (optional):
If you wish to record video to an SD card, please
insert a memory card. The B180W can support
up to 64GB micro SD card. Without a memory
card inserted you will still be able to view the
live video feed and record video to your iOS/
Android Device;
B. Power device on/o:
To power on the B180W, toggle switch #5 to the
on position (down). To power o, toggle switch
#5 to the o position (up);
C. Install iOS/Android APP:
The FUVISION App can be found on both
Google Play and the App Store. Visit your
preferred store and download the APP;
D. Device/Camera ID and Password:
The device/Camera ID and Password can be
found on the sticker on the back of the camera.
The default password is “9999”;
Quick
Set-up
This section will help you set up everything
you need to use the B180W Camera. Please
follow the instructions making sure you have
successfully completed this section before
proceeding.
A. Visit the App Store for iOS devices or the
Google Play Store for android devices;
B. Search for the APP by typing “FUVISION” in the
search bar;
C. Download and install the APP on your iOS/
Android Device;
D. Locate your camera ID and password on the
back sticker of the B180W;
1Getting
Started
You will need to set-up an account in order to
use the FUVISION APP.
A. Make sure your iOS/Android device is
connected to Wi-Fi or a mobile network;
B. Open the “FUVISION” APP and tap “Create
Account”;
2FUVISION Account
Setup
C. Fill in all the necessary information and click
“register” to complete the account creation
process;
D. Next, tap “login”. Do not exit out of the APP; let
it run in the background of your mobile phone.
Note: If you already created an account but lost
the password, simply enter in the registered
email address and tap “Retrieve password”; Go to
your email account to access the new password.
If you do not receive an email with the new
password, please check your “JUNK” mail box;
3B180W
Wi-Fi Setup
There are two ways to get your B180Ws’ Wi-Fi
set up; the Smartlink Method and the Manual
Method.
A. Smartlink Method:
This method has to be completed once started.
Before using this method, make sure you have
read and understood the steps below.
1. Connect your iOS/Android device to your
home/oce Wi-Fi;
2. Open the ‘FUVISION’ APP to access the Device
list;
3. Tap on the ‘add’ button located on the top
right corner;
4. Tap on the ‘Smartlink’ button from the list
shown;
5. On the ‘Smartlink’ page, enter in your Wi-Fi
SSID (network name) and password then click
conrm. Note: You will hear a sonic wave sound
coming from your iOS/Android device while it is
connecting;
6. With the B180W turned on, place your iOS/
Android device close to it so it can hear the
sonic wave sound. The B180W uses this sound to
connect to your home/oce network;
7. When the B180W connects to your home/
oce Wi-Fi, a short sound will be made to notify
you;
8. Go back to the Device List page on your iOS/
Android device and pull down on the screen to
refresh the page. Your connected B180W will
appear and you can start monitoring;
Loading...