Recon Robotics Scout XL User Manual

©2016 ReconRobotics

17

Warranty

The Manufacturer’s Warranty documentation is available by email request from
[e-mail]

Updated Manuals and Translations

For the most current version of this manual, along with all available translations of
this manual, please visit our website at www.reconrobotics.com

To Request Service or Repairs

Call or e-mail your ReconRobotics representative or reseller to describe the
problem you are experiencing and request a Return Material Authorization (RMA)
tracking number. In addition to your original sales receipt, you will need to provide
the unit's serial number, your return shipping address, email address and a daytime
telephone number.

ReconRobotics, Inc

5251 W 73rd Streeet, Ste A

Edina, MN 55439

Phone: [phone] or 952-935-5515

Fax: [phone]

Website: www.reconrobotics.com

For customer service, call 866-398-1921

Or email [e-mail]

Warranty and Service

Warranty and Service

Recon Scout XL

Recon Scout XL

User Manual

User Manual

Version 1.03 November 2016

R001261

Saving Lives at the Tip of the Spear™

Product Identification

This manual applies to the ReconRobotics Recon Scout® XL and OCU II.

Notice:

Changes or modifications not expressly approved by ReconRobotics could void the user’s
warranty and could void the user's authority to operate the equipment.

All materials contained in this document are proprietary and confidential.
Reproduction and duplication, without specific written permission, are strictly prohibited.

Corporate Headquarters:

ReconRobotics, Inc.

5251 W 73rd Street, Ste A

Edina, MN 55439 USA

Phone: [phone] or 952-935-5515

Fax: [phone]

Email: [e-mail]

Website: www.reconrobotics.com

The devices described within this manual are protected under
US Patent Numbers 6,548,982, 6,806,346, 7,559,385 and other
patents pending.

Place Serial Number Sticker Here

©2016 ReconRobotics

16

Lithium Polymer batteries are volatile. Only charge the robot and OCU II with

chargers provided by ReconRobotics. Failure to do so may cause fire, which
could result in personal injury and/or property damage.

By purchasing a robot kit from ReconRobotics, the buyer assumes all risks

associated with lithium polymer batteries. If you do not agree with these
conditions, please return the robot kit to ReconRobotics.

Do not attempt to disassemble or modify the robot or OCU II. This may cause

an electric shock, fire or system failure.

Do not insert any foreign objects inside the robot or OCU II. This may cause

electric shock, fire or system failure.

Do not immerse the OCU II or chargers into water or liquids.

 If water or any liquid enters the inside of the OCU II, immediately stop use

to avoid electric shock, fire or system failure.

The following describes additional symptoms of a device that needs technical

attention and should not be used:

 After a full charge, the OCU II display intermittently turns ON and OFF.

 The OCU II or charger has been dropped and is malfunctioning.

 There are exposed wires on a charger cable.

 The robot, OCU II or charger becomes too hot to touch.

 There is an unusual sound emitted from any of the components.

 There is smoke emitted from any of the components.

 There is a burning smell emitted from any of the components.

If you have questions or concerns regarding the use
or operation of the robot or OCU II, discontinue use
and contact ReconRobotics or the vendor from
whom you purchased your equipment.

©2016 ReconRobotics

15

Safety Information & Warnings

Safety Information & Warnings

Read these warnings before charging or using your
robot or OCU II. Failure to read and follow these
instructions may result in fire, personal injury and/or
damage to property.



To reduce the risk of electric shock, do not remove the shell of the robot,
Operator Control Unit II (OCU II) or the chargers. No user-serviceable parts are
inside. Refer servicing to qualified ReconRobotics service personnel.

To reduce the risk of injury or damage, keep these safety precautions in mind

when setting up, using and maintaining your equipment.

Read all safety and operating instructions before operating the robot or OCU II.

Retain the safety and operating instructions for future reference.

Follow all operating and usage instructions.

Do not attempt to service the robot or OCU II yourself. Repairs or modifications

not conducted by authorized personnel will result in the voiding of warranty and/
or Annual Maintenance Plans.

Keep loose clothing and hair away from the robot.

Considerations for charging:

 Always charge the robot with the activation pin inserted.

 Always keep the OCU II turned off while charging.

 Always charge in a cool, ventilated, fire-safe area.

 Do not leave system unattended while charging.

 Always use a proper country-specific AC socket (120-240 VAC) with the

battery charger. Do not force the plug into a socket.

 Ensure the charger plug is inserted at the correct angle when connecting to

the robot or OCU II.

 Ensure the barrel of the charging connector is not deformed, bent or

otherwise damaged before inserting in the robot or OCU II.

FCC Guidelines and Logbook* i-iv

Recon Scout XL Kit Inventory 1

Recon Scout XL Robot Components 2

OCU II Components 3

OCU II Audio/Video Out Capabilities 4

Quick Start Guide 5

Instructions for Use:

Setup 6

Chargers 7

Field Maintenance:

Recon Scout XL 9

OCU II 10

Frequently Asked Questions 11

Troubleshooting 12

Safety Information and Warnings 15

Warranty and Service 17

*For applicable FCC guidelines, refer to your
FCC logbook (US customers only).

Table of Contents

Table of Contents