RECON 26422 User Manual

Random (default)

Single (split)

Double (split)

Quad (split)

Quint (split)

Mega (split)

Ultra (split)

Single-Quad (split)

Single H/L (split)

Single (all)

Double (all)

Quad (all)

Quint (all)

Mega (all)

Ultra (all)

Single-Quad (all)

Single H/L (all)

Steady 2 (california)

Steady 4 (all)

Momentarily apply +VDC
to YELLOW wire:

ȅonce for next pattern
ȅquickly three times for reset

Note: This unit is not factory set at pattern 0

LED COLOR

RED

AMBER

BLUE

GREEN

WHITE

FLANGE COLOR

CHROMEBLACK

To +VDC (fuse @ 3A)

To Chassis Ground

For Simultaneous or Alternating Flash

Group1 Heads: (Wiring- WHITE connected to RED) will flash together
Group2 Heads: (Wiring- WHITE not connected to RED) will flash together

*Group1 Heads will alternate with Group2 Heads*

For Synchronization & Flash Patterns

Connect YELLOW wires of all heads together for synchronization

*All heads must be set at the same pattern

RED

BLACK

YELLOW

24 VDC12 VDC

SCREWS

FLANGE

LIGHTHEAD

FOAM RUBBER

090320