RECOM RACM100-24S Datasheet

• Long 5 Year Warranty

Features

• 2MOPP/250VAC

• Suitable for built in Class II Applications

• Wide Input Voltage Range (85-264VAC)

• Low Leakage Current (<75µA)

Regulated
Converters

• 5000m Operation

• Active Power Factor Correction

• Connector Set available

Description

The RACM100 is a compact 3.6”x2.44” high efficiency AC/DC power supply with 2xMOPP safety
approval for medical applications. These space saving enclosed power supplies have an universal input
voltage range (85-264VAC), 4kVAC isolation, require no minimum load and can be used at ambient
temperatures of between -25°C and +85°C. The 12V, 15V, 24V or 48V output voltages are
fully protected and have tolerances of less than ±0.2% over the entire input voltage range and less
than ±0.5% over the entire load range. The RACM100 series is certified to medical safety standard
IEC/ES/EN-60601-1 3rd Edition and feature BF rated outputs with less than 75µA leakage current. It
has a built-in Class B EMI filter and comes with a five year warranty.

Selection Guide

Part Input Output Output Input Power Efficiency
Number Voltage Range Voltage Current @ No Load typ.
(VAC) (VDC) (A) (W) (%)

RACM100-12S 85-264 12 8.34 0.3 91

RACM100-15S 85-264 15 6.67 0.3 92

RACM100-24S 85-264 24 4.17 0.3 92

RACM100-48S 85-264 48 2.09 0.3 91

AC/DC Converter

RACM100

E

A

Y

100 Watt
Enclosed

5

5

w

a

r

n

r

a

Case Style
Single Output

R

y

t

Specifications (measured at T

= 25°C, 250VAC, full load and after warm-up)

A

BASIC CHARACTERISTICS

Parameter Condition Min. Typ. Max.

Input Voltage

Input Current

Absolute max. Input Current cold start, 230VAC 60A

Input Frequency Range AC Input 47Hz 63Hz

Start-up Time 1 Second

Rise Time 20ms

Hold up Time 115VAC, full load 16ms

Minimum Load 0%

Power Factor 0.95

Operating Frequency 60kHz

Output Ripple and Noise

(measured @ 20MHz BW)

115VAC, fulll load

230VAC, full load

12VDC, with 10µF/25V MLCC
15VDC, with 10µF/25V MLCC

24VDC, with 1µF/50V MLCC

48VDC, with 0.1µF/100V MLCC

85VAC

120VDC

120mVp-p
150mVp-p
160mVp-p
340mVp-p

264VAC
370VDC

1.15A

0.55A

2MOPP
250VAC

E314885

EN-55011 Certified
EN-55022 Certified
ES-60601 Certified
IEC/EN-60601 Certified

continued on next page

Refer to Applications Notes

REV.: 3/2015www.recom-power.com

MED-1

2MOPP

RACM100

AC/DC Converter

Specifications (measured at T

94

92

90

88

Efficiency (%)

86

84

2010 4030 706050 80 90 100

Load vs. Input Voltage Power Factor vs. Load

125

100

80

60

A

Efficiency vs. Load

Load (%)

= 25°C, 250VAC, full load and after warm-up)

230VAC

115VAC

94

92

90

88

Efficiency (%)

86

84

1

Series

Efficiency vs. Input Voltage

100% Load

85

130 150 190 230 25011090 170 240 264

Input Voltage (V)

230VAC

115VAC

50% Load

40

% of Full Load

20

100 115 130 145 160 175 264

85

Input Voltage (V)

Power Factor [ ]

0

4030 6050 8070 90 100

Load (%)

REGULATIONS

Parameter Condition Value

Output Voltage Accuracy 230VAC, full load ±1%

Line Voltage Regulation low line to high line, full load ±0.2%

Load Voltage Regulation

Output Voltage Trim ±10%

Transient Peak Deviation load step from 50% - 75% change at 2.5A/µs 3% Vout max.

Transient Recovery Time load step from 50% - 75% change at 2.5A/µs 500µs typ.

0% to 100% load

10% to 100% load

±0.5% max.
±0.4% max.

PROTECTIONS

Parameter Condition Value

Input Fuse internal line and neutral T3.15A / 250VAC, slow blow type

Short Circuit Protection (SCP) continuous, auto-recovery

Over Load Protection (OLP) % of Iout rated Hiccup Mode, 115% min. / 150% max.

Over Voltage Protection (OVP) % of Vout nominal Latch Mode, 115% min. / 135% max.

I/P to O/P

Isolation Voltage

Means of Protection

Leakage Current 264VAC 75µA max.

Medical Device Classification Type BF applied device

I/P to Chassis

O/P to Chassis

working voltage

4kVAC / 1 minute

1.5kVAC / 1 minute

1.5kVAC / 1 minute

250VAC / continuous

MED-2

continued on next page

REV.: 3/2015 www.recom-power.com

Value

RACM100

8mmmin.

EN61000-4-2, Criteria A

EN61000-4-3, Criteria A

AC/DC Converter

Specifications (measured at T

Internal Clearance
Creepage

Isolation Resistance 500VDC 100MW min.

Insulation Grade Reinforced Insulation

= 25°C, 250VAC, full load and after warm-up)

A

I/P to O/P
I/P to O/P

Series

8mm min.

ENVIRONMENTAL

Parameter Condition

Relative Humidity non-condensing 5% to 95% RH

Temperature Coefficient ±0.02% / °C

Operating Temperature Range with derating -25°C to +85°C

Operating Altitude 5000m max.

MTBF (+25°C) according to MIL-HDBK-217F, full load 790.3 x 103 hours

Derating Graph

100

80

60

115VAC

230VAC

40

30

20

Output Current (%)

0

-25 10080

6040200

8555

Ambient Temperature (°C)

SAFETY AND CERTIFICATIONS

Certificate Type (Safety) Report / File Number Standard

IEC/EN Medical Safety (CB Scheme)

ANSI/AAMI Medical Safety ES60601-1

CAN/CSA Medical Safety C22.2 No. 60601-1

Risk Managment 1408016005 Medical Report + ISO14971 Risk Assessment

1408016004

EMC Compliance Conditions Standard / Criterion

EMI Conducted CISPR 11, EN-55011, Class B

Radiated CISPR 11, EN-55011, Class A

Conducted and Radiated FCC18, Class B

ESD Air ±8kV; Contact ±6kV
Radiated Immunity

Fast Transient

Surge

Conducted Immunity

Power Frequency Magnetic Field

Voltage Dip and Interruptions

L-N ±1kV and L-PE/N-PE ±2kV EN61000-4-5, Criteria A

100/230VAC, 50Hz

20V/m

±2kV EN61000-4-4, Criteria A

20Vr.m.s EN61000-4-6, Criteria A

10A/m EN61000-4-8, Criteria A

30% 500ms
>95% 10ms
>95% 5000ms

EN61000-4-11, EN60601-1-2, Criteria A

EN61000-4-11, EN60601-1-2, Criteria A

EN61000-4-11, EN60601-1-2, Criteria B

IEC/EN-60601-1

continued on next page

REV.: 3/2015www.recom-power.com

MED-3

RACM100

AC/DC Converter

Specifications (measured at T

Harmonic Current full load EN61000-3-2; Class D

Voltage Flicker EN61000-3-3, PASS

Thermal Shock MIL-STD-810F

Shock IEC60068-2-27

Vibration IEC60068-2-6

= 25°C, 250VAC, full load and after warm-up)

A

Series

DIMENSION and PHYSICAL CHARACTERISTICS

Parameter Type Value

Case Material Aluminum

Package Dimension (LxWxH) 91.4 x 62.0 x 39.2mm

Package Weight 210g

Dimension Drawing (mm)

Top View

CON1

CON1

76.2

FC 84.2

91.4

Side View

Trim Adj.

22.1

CON2

24.5

39.2

FC 41.3

62.0

AC Input Connector CON1

Pin1 Line
Pin3 Neutral

Mates with
JST housing: VHR-3N
JST crimp terminals: SVH-21T-P1.1

DC Ouptut Connector CON2

Pin1,2 -Vout
Pin3,4 +Vout

Mates with
JST housing: VHR-4N
JST crimp terminals: SVH-21T-P1.1

Tolerance: ±0.5mm
FC: fixing center

MED-4

1.20

continued on next page

REV.: 3/2015 www.recom-power.com

76.2

FC 41.3

24.5

39.2

1.20

62.0

22.1

FC 84.2

91.4

Trim Adj.

CON1

CON2

CON1

RACM100

AC/DC Converter

Specifications (measured at T

Dimension Drawing (mm)

10.0

= 25°C, 250VAC, full load and after warm-up)

A

Bottom View

14.0

3.5

34.0

Ø4.0

Series

10.4

36.5

PACKAGING INFORMATION

Parameter Type Value

Packaging Dimension (LxWxH) Cardboard Box 418 x 258 x 105mm

Packaging Quantity 10pcs

Storage Temperature Range -40°C to +85°C

The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written
consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer

shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications.

REV.: 3/2015www.recom-power.com

MED-5