EU 38 www.recom-international.com
Electrical Specifications (measured at T
A
=25°C, at nominal input voltage and rated output current unless otherwise specified)
Input Voltage Range VIN(continuous operation) 5V types 4.5VDC min. / 5.5VDC max.
12V types 10.8VDC min. / 13.2VDC max.
Ripple Current (I
RIPPLE
) 5V types 85 mA
12V types 66 mA
Zero Load Input Current (I
CCZL
) 5V types, 0% output load 50 mA typ. / 80 mA max.
12V types, 0% output load 27.5 mA typ. / 50 mA max.
Internal Power Dissipation (P
DISS
) 5V types, 0% output load 250 mW typ. / 400 mW max.
12V types, 0% output load 330 mW typ. / 600 mW max.
Operating Threshold Switch voltage (V
SD
) 1.30 V min. / 1.90 V max.
Sink current (ISD) 170 µA min. / 300 µA max.
Shut Down Pin Current Sink 5V types, V
SD
= 5.0V 0.80 mA min. / 1.10 mA max.
12V types, V
SD
= 12.0V 2.20 mA min. / 3.00 mA max.
Input Quiescent Current During Shut Down 5V types, V
SD
= 5.0V 14 mA
12V types, V
SD
= 12.0V 15 mA
Total Rated Power (P
OUT
)Total of all outputs or any single output 0.1 W min. / 3.0 W max.
Output Current (I
OUT
) From any single 24V output 4.2 mA min. / 126 mA max.
Single Channel Voltage Setpoint Accuracy P
OUT
= 100mW 0% min. / 10% max.
P
OUT
= 3W -7.5% min. / 2.5% max.
EUROLINE - DC/DC-Converter
RxxTR244872-Series, 3 Watt, SIP8, Regulated, (Triple Output)
● Input/Output 1kVDC Isolation
● UL 94V-0 Package Material
● Internal SMD Construction
● Industrial Temperature Range
● No External Components required
● Triple Outputs (-24V, -48V &-72V)
Features
Selection Guide 5V and 12V Input Types
Part Number Nom. Input Output Rated Output Output Current
1)
Output Current
2)
Voltage ´Voltage Min Full Min Full
Load Load Load Load
(VDC) (VDC) (mA) (mA) (mA) mA)
Vo1 -24 1.4 42 4.2 126
R05TR244872 5 Vo2 -48 0.7 21 2.1 63
Vo3 -72 0.5 14 1.4 42
Vo1 -24 1.4 42 4.2 126
R12TR244872 12 Vo2 -48 0.7 21 2.1 63
Vo3 -72 0.5 14 1.4 42
1).
Assuming all 3 channels are equally loaded.
2).
Assuming only 1 channel is loaded.
Absolute Maximum Ratings
Input Voltage V
IN
05V types 7VDC
12V types 15VDC
Short Circuit Duration
3)
1 s
Control Voltage, SD V
IN
Operating Temperature Range (all output types) –40°C min. to +85°C
Lead Temperature 1.5mm from Case for 10 seconds 300°C
Output Power Delivery 3W
3).
Supply voltage must be discontinued at the end of the short circuit duration.