EU 8 www.recom-international.com
EUROLINE - DC/DC-Converter
RxxSSxx Series, 1 Watt, SMD, 1kVDC Isolation (Single Output)
● Wide Temperature Performance at
full 1 Watt Load, –40°C to +85°C
● 1kVDC Isolation
● Efficiency to 78%
● UL 94V-O Package Material
● Toroidal Magnetics
● Internal SMD Construction
● MTTF up to 2.9 Million Hours
Features
Selection Guide 5V and 12V input types
Part Number Nom. Input Rated Output Rated Output Input Current Efficiency Isolation Package
Voltage Voltage Voltage Current at Rated Load Capacitance Style
(VDC) (VDC) (mA) (mA) (%) (pF)
R05SS05 5 5 200 294 68 35
R05SS09 5 9 111 267 75 43
R05SS12 5 12 83 260 77 42
R05SS15 5 15 66 256 78 44 SMD
R12SS05 12 5 200 124 67 47 14 Pin
R12SS09 12 9 111 114 73 77
R12SS12 12 12 83 113 74 88
R12SS15 12 15 66 111 75 95
Absolute Maximum Ratings
Input Voltage VIN5V types 7V
Input Voltage VIN12V types 15V
Short Circuit Duration
1)
1s
Internal Power Dissipation (at rated current and +85°C) 600mW
Lead Temperature (1.5 mm from case for 10 seconds) 300 °C
1).
Supply voltage must be discontinued at the end of the short circuit duration.
Input Voltage Range VIN(continuous operation) 5V input types 4.5VDC min. / 5.5VDC max.
12V input types 10.8VDC min. / 13.2VDC max.
Reflected Ripple Current (depending on the type) 30 mA p-p min. to 47 mA p-p max.
Voltage Set Point Accuracy See Tolerance Envelope
Line Regulation 1.0% min. / 1.2% max. of V
IN
Load Voltage Regulation (10% load to 100% full load) 5V output types 12.8% min. / 15% max.
9V output types 8.3% min. / 9% max.
12V output types 6.8% min. / 7.5% max.
15V output types 6.3% min. / 7% max.
Ripple & Noise (20MHz band limited), (depending on the type) 38mVp-p min. / 85mVp-p max.
Isolation Voltage (flash tested for 1 second) 1000VDC min.
Test Voltage (50Hz, 10 seconds) 1000 Vpk min.
Resistance (Viso = 1000V) 10 GΩ typ.
Switching Frequency at Full Load (depending on the type) V
IN
5V types 110kHz typ.
V
IN
12V types 110kHz typ.
Continued next page.
Electrical Specifications (measured at T
A
= 25°C, at nominal input voltage and rated output current unless otherwise specified)