User Manual for Mobile DVR
RECODA
4CH MINI Mobile DVR USER MANUAL
Ver. 1.1
1
1. ....................................................................................................................................... 4 System Introduction
RECODA
1.1. .............................................................................................................................................. 4 Features
User Manual for Mobile DVR
Contents
. Appearance ...................................................................................................... 错误！未定
1.2
1.3. ................................................................................................................................. 5 Re
1.4. ......................................................................................................................................... 7 Front pan
1.5
. ......................................................................................................................................... 8 Back pane
2. ................................................................................................................................................ 9 Specifi
echnique Parameters
3. .................................................................................................................................. 10 T
4. .............................................................................................................................................................. 1
4.1. ................................................................................................................................................ 1
4.2. ..................................................................................................................... 12 System Main Interface
4.3. .................................................................................................................. 12 Video Records Playback
4.4. ............................................................................................................................... 13 System Settings
mote Control
el
1.4.1. ...................................................................................................................... 7 LED indicators:
1.4.2. .................................................................................................................................
l
cations
4.4.1. ...................................................................................................................... 14 Basic Settings
4.4.2. ............................................................................................................... 15 Recording Settings
4.4.3. ............................................................................................................. 16 Sub-Stream Settings
义书签。
7 SD card:
1 GUI
1 Login
4.4.4. ............................................................................................................. 17 Power Management
4.4.5. ..................................................................................................................... 18 Alarm Settings
4.4.6. .................................................................................................................. 20 Security Settings
4.4.7. ................................................................................................................ 21 Network Settings:
4.5. ......................................................................................................................................
4.6. ........................................................................................................................... 24 Management Tools
4.6.1. ................................................................................................................. 25 Log Management
4.6.2. .......................................................................................................... 26 SD Card Management
4.6.3. ................................................................................................................... 27 Default Settings
4.6.4. ............................................................................................................ 27 Config Management
5. .......................................................................................................................................
5.1 ...................................................................................................................... 28 Cable Definition
5.1.1 Power Cable................................................................................................................................
5.1
5.1.3 Alarm Input and Output Cable.................................................................................................... 30
5.2. Main Board Outside View.................................................................................................................... 31
m Info
Installation
.2 Audio/Video Input and Output Cable ......................................................................................... 29
24 Syste
28 Device
28
5.2.1. DVR without 3G PCB............................................................................................................... 31
5.2.2. DVR with 3G and GPS PCB .................................................................................................. 32
2
User Manual for Mobile DVR
RECODA
6. ................................................................................................................ 33 Syestem Upgrade User Guideline
6.1. ..................................................................... 33 MU-MINI-RFS.crc（Record File System）
6.2. ................................................................... 33 MU-MINI-APP.crc（Applic
6.3. ................................................................................................................................. 33 MCU Up
6.4. Upgrade Check out.................................................................................................................................... 33
G User Guideline
7. ....................................................................................................................................... 34 3
7.1. ..................................................................................................... 34 Working principle representation
7.2. ...................................................................................................................... 34 Installation Guideline
7.3. ........................................................................................................................... 35 Parameter Settings
7.3.1. ................................................................................................................... 35 Network Setting
7.3.2. .................................................................................................................... 36 Wireless setting
7.3.3. ................................................................................................................. 36 Statues check out
7.4. .......................................................................................................................... 37 PC software setting
8. ...........................................................................................................................................................
8.1
. .............................................................................................................................. 37 Wireless Module
8.2. ............................................................................................................................ 38 General Problems
grade
ation Program）Upgrade
Upgrade
37 F.A.Q
3
User Manual for Mobile DVR
RECODA
1. System Introduction
1.1. Features
H.264 main profile Video compression format; Support 1 to 4 channels video input.
Adopt 10bit video decoder processor to ensure picture quality, and each video channel is attached with an
independent video decoder to avoid disturbing from each other.
Industrial grade design: all electronic components conform to industrial standard through the entire design,
including the special connectors dedicated for mobile DVR.
Built-in GPS, G sensor (optional).
Built-in wireless module like 3G (EVDO, HSPA, HSDPA), GPRS, WiFi (optional).
With the special UPS technology, the DVR will work for another 10 to 15 sec after power failure, which
makes the device shut down normally and keep the file safe
Real time recording: 100f/s (PAL); 120f/s (NTSC). Recording resolution: CIF/ 2CIF/ D1 optional,
maximum support 2CH of D1 + 2CH of CIF.
Support 1 channel audio input, 1 channel microphone or audio line in. G.726 compression.
4 channels alarm input/ 2channels alarm output.
RS232 interface for remote control; RJ45 10M/100M Ethernet port.
Video recording mode: Auto, alarm, timed and manual recording.
The video file format is ASF. The file can be played by general media player VLC or our customized
software which support 1 channel or 4 channels synchronous playback
Storage capacity: two 32GB SD card (the default selection is one SD card support).
Quick start-mode: the device will turn to working in 20 sec after power on. Other start- or close- mode
including ACC on, timed turn on/off, manual boot/shutdown the device.
Voltage supply range is from 8V to 36V, the DVR is compatible with the most of vehicles. Power output is
12V/1.5A.
Energy- efficient design, the power consumption is less than 5W with normal operating state.
With anti-vibration and anti-high temperature protection, the quality of video files is always guaranteed
Operating temperature: -25℃ to +70℃
All materials and PCB production conform to RoHs standard.
Elegant and industrial design: Mini size, for easy installation, more concealing.
Dimensions: 112(W) x36(H) x138(D) mm
Weight: 0.45KG;
4
User Manual for Mobile DVR
RECODA
1.1.1. 1.2. Appearance
Front view:
Back view:
5
1.3 Remote Control
RECODA
User Manual for Mobile DVR
6
User Manual for Mobile DVR
RECODA
1.4 Front panel
The front panel for the device which supports two SD card:
The front panel for the device which supports one SD card:
1.4.1 LED indicators:
【PWR】Power indicator.
【ERR】Error indicator: LED on－No SD cards
【CH1－CH4】Video input indicators
【CH1】LED blinks indicating that the system firmware is being upgraded.
【SD1,SD2】SD card status Indicator:
LED on－SD card works；
LED off－no SD card or SD card doesn’t work;
LED blinks－recording.
1.4.2 SD card:
User must format new SD Card before use.
【REMOVE1,REMOVE2】when the device is working, press the RMOVE key for 3 seconds until the
LED was off, then the SD cards can be moved safely. SD cards will resume work if they were not removed
in 15 seconds..
7
User Manual for Mobile DVR
RECODA
1.5 Back panel
【PWR】Power Supply connector
【GPS】GPS antenna connector
【WIRELESS】WIRELESS antenna connector
【USB】USB1.1 port
【ETHERNET】LAN port.
【ALARM IN/OUT】Alarm input and output connector
【VI/VO AI/AO】Audio and video input and output connector
Remark: GPS and wireless transmission functions are available with M603B.
8
User Manual for Mobile DVR
RECODA
2 Specifications
Function Item Description
Channel 1-4 channels
Recording
System
Playback
System
GUI
Resolution
Support CIF、HD1、D1 resolution, compatible with 2CH of D1 & 2CH of CIF. fps:
1 to 25f/s/ch adjustable (PAL) or 30f/s/ch (NTSC) .
Video Quality 1-4 levels, 1 is the highest level and 4 is the lowest level.
OSD Overlays information such as date time and vehicle ID
Support two SD card recycle recording. Automatically switch to the other one
SD card REC
when the first SD card was full, and the data will be automatically overwritten .
The default setting is auto recording after power on. Timed recording and alarm
Recording Mode
recording are supported.
Preview Support 1 channel and 4 channels preview.
Disk Data
Support SD cards overwritten function.
overwritten
Video Search Search video files anytime per day, type(n/a) and target SD card.
Support 1 to 4 channels playback.
Playback
Support forward and backword play at the speed of: x 2,x4,x8,x16.
Graphical User
Setup system parameters with the remote control.
Interface
Alarm
Optional
Function
Others
Support up to 4 channels alarm input.
Input
Output Support up to 2 channels alarm output, level signal.
GPS
Network
G Sensor Built in G-sensor is available with M603B
Power Settings
Power-off
protection
Pre-record 15 seconds ahead of the alarm.
Record duration after alarm can be set in system
GPS module can be built-in device M603B, the GPS info will be recorded
synchronous
RJ45 Ethernet port.
M603B supports several wireless modules such as 3G and WIFI
System auto power on/off:
1,Vehicle acc on/off---system auto power on after acc on, system power off
according to the delay time (up to 240min, default 5min) after acc off.
2,Preset time---Only according to time preset table.
With the power-off protection, all data can be saved safely and the recording can
be closed normally after power failure.
9
User Manual for Mobile DVR
RECODA
3 Technique Parameters
Item Description
Processor Hisilicon Hi3511
Operating system Linux(2.6)
System
Video
Audio
Signal format PAL/NTSC
GUI Yes
Security
Input 4 CVBS, 1.0Vp-p, 75Ω
Output 1 CVBS, 1.0Vp-p, 75Ω
Play channels 1 channel or 4 channels synchronous play
Recording speed
Input Mic or line in, 1 channel
Output 1 channel output
Output voltage 1V ~2V
Audio recording Synchronized with video
Two level password protections for administrators and
users
PAL: 25Frame/s ,CCIR625 line,50 field
NTSC: 30Frame/s,CCIR525 line,60 field
Audio compression G.726
video recording
10
Video compression H.264,（VBR）/ (CBR)
Recording Resolution
Video stream standard ISO14496-10
Audio stream standard G.726
Bit rate
Video Frame rate PAL 1~25/s/ch,NTSC 1~30/s/ch
Audio frame rate 5KB/s
D1/HD1/CIF, MAX:2 channels of D1 and 2 channels of
CIF
CIF: 256Kbps ~ 1.5Mbps, 4 quality level support,
HD1: 600Kbps ~ 2.5Mbps, 4 quality level support
D1: 800Kbps ~ 3Mbps, 4 quality level support
User Manual for Mobile DVR
RECODA
Support two (SDHC) SD card, the max capacity is 32G for
Storage capacity
input 4Ch input
Alarm
output 2Ch output
Communication
Interface
GPS Embedded GPS module Optional
PC Viewer PC playback software Yes
Firmware upgrade Upgrade with SD card Yes
Others
RS-232 Yes
RJ45 10M/100M Ethernet
Power input DC:+8V ~ +36V
Power output +12V@1.5A；+5V@1.5A
Operating temperature -25℃ to +70℃
Humidity 20% to 80%
each.
File system: FAT32
4 GUI
4.4 Login
LOGIN
LOGIN
DEVICE NO：：
DEVICE NO
USER NAME：：
USER NAME
PASSWORD：：
PASSWORD
11111 （（
11111
user/admin
user/admin
******
******
CANCELLOGIN
11111））
11111
Factory Default Username: admin
Factory Default Admin Password: 888888
11
User Manual for Mobile DVR
RECODA
Factory Default User Password: 111111
4.5 System Main Interface
The main interface will be displayed on the screen when you login successfully, it contains
4.6 Video Records Playback
Select ‘Playback’ icon with left/right/up or down key and press ‘enter’ key to get below interface
REC SEARCH
REC SEARCH
10
09
08
07
06
05
04
03
02
01
02
01
12
11
12
11
22
21
22
21
04
03
14
13
14
13
24
23
24
23
06
05
16
15
16
15
26
25
26
25
08
07
18
17
18
17
28
27
28
27
REC TYPE：ALL/ALARM
DISK SELECT：SD1/SD2
DATE：2009/05/27
START TIME：00：00
END TIME：23：59
SEARCH
10
09
20
19
20
19
31
30
29
29
31
30
Note:
System will highlight the valid recording info in yellow color
12
User Manual for Mobile DVR
RECODA
"REC TYPE": press the【Enter】 button to select All or Alarm. The default setting is All.
“DISK SELECT ": press the【Enter】 button to select the SD card:
"DATE": Default is current day. Press digit keys to reset
"START TIME": Press digit keys to setup the start time, default setting is 00:00.
"END TIME": Press digit keys to setup the end time, default setting is 23:59.
"SEARCH": Take curser move to "SEARCH" and press the【Enter】 key to see the result.
SEARCH RESULT
SEARCH RESULT
DATE：2009/05/27
TYPE RES START END CH SIZE
Normal D1 15：30 16：00 1 154M
Alarm D1 15：30 16：00 2 153M
Normal CIF 15：30 16：00 3 100M
Alarm CIF 15：30 16：00 4 98M
FIRST UP LAST NEXT
The default setting is SD1.
Press direction keys to view recording information, press 【Enter】 to play , press【ESC】 to return back;
Press direction keys to select "FIRST", "UP", "NEXT", "LAST", and press 【ENTER】 to enter the
corresponding page.
4.7 System Settings
SYSTEM SETUP
SYSTEM SETUP
13
User Manual for Mobile DVR
RECODA
4.7.2 Basic Settings
BASIC SETUP
BASIC SETUP
Three type：Y/M/D, D/M/Y, M/D/Y
DATE TYPE：Y/M/D
TIMEZONE：GMT +08（00~+12 / -01~-12 ）
DATE：2009-05-27 09：01：30
IDLE TIME： 30（s）（Default 30 senconds）
DEVICE NO ：11111 (Default 30 senconds）
COMPANY NAME：Company Name
VEHICLE NO：00000
DRIVER NAME：Driver Name
BUS LINE NO：Line number
SAVE
“DATE TYPE”: year/month/day, day/month/year or month/day/year. Press 【ENTER】 to select.
"DATE": system date, press 【ENTER】and then press【－】or【＋】 to setup, press【ENTER】again to confirm
the settings. Press left/right to select year/month/day and repeat above steps.
"TIME": The same setup as “DATE”.
"OPR TIMEOUT": All system Interface closed time, default time is 30s. Press digit keys to setup the operating
closing time.
"DEV NUM": It refers to the device ID. Press digit keys to setup the ID.
"COMPANY NAME", "VEHICLE NO", "DRIVER NAME",”LINE NUM”: Press 【Enter】 key to get the
keyboard window displayed, and use left/right/up/down/enter key to setup.
Select “SAVE” and press 【ENTER】to save the settings.
14
User Manual for Mobile DVR
RECODA
4.7.3 Recording Settings
RECORD SETUP
RECORD SETUP
SYSTEM： PAL/NTSC
RESOLUTION： D1/HD1/CIF
AUDIO ： ON/OFF
AUDIO INPUT： ON/OFF
TIME SLICE： 15/30/45/60 (MIN)
CHANNEL
CHANNEL
CH1（（
1~4））
CH1
1~4
"SYSTEM ": Press 【ENTER】 key to select PAL or NTSC
"RECORD MODE": AUTO / Timed / Manual, press 【ENTER】 to select.
"RESOLUTIONS": Press the【ENTER】to select D1, HD1 or CIF. Please note 4 channels will be set
Synchronously, e.g. if you set “CIF”, the CIF resolution will apply to all channels;
However if you set the resolution as D1, this setting will apply to ch1 and ch2+ CIF
will apply to ch3 and ch4. The resolution doesn’t relate with the below “Channel”
QUALITY
QUALITY
1~4））
11（（1~4
TIME LIST SAVESUB-STREAM
RECORD MODE
BITRATE
OVERWRITTEN：ON/OFF
ALARM DELAY： 30（30～1800S）
FRAME RATE
FRAME RATE
25/30
25/30
：（D1） 2048 /2000 /1600 /1400 /1200 /1000 / 800 /600
：
AUTO/TIMED/ALARM/MANUAL
（HD1） 1500 /1300 /1100 /900 /800 /700 /600 /500
（CIF） 1200 /1000 /800 /700/ 600/ 500/ 400 /300
RECORD
RECORD
ON/OFF
ON/OFF
“Quality” “Frame Rate””Record” directly.
"AUDIO ": Audio recording On / Off switch, press the【ENTER】to select.
"AUDIO INPUT": LINE IN / MIC, press the【ENTER】to select.
"TIME SLICE": There are 4 types of time period for continued recording, they are 15/30/45 and 60
minutes. Press the【ENTER】key to modify this setting.
"CHANNEL", "QUALITY", "FRAME RATE", "RECORD": Those four keys are for the configuration of
every single channel, press the【ENTER】key to set up.
"OVERWRITTEN": Overwritten on/off switch. Press the【ENTER】 key to select.
"ALARM DELAY ": Set alarm delay between 30 seconds ~ 1800 seconds, press digit keys to setup
"GOP": I-frame interval. Press digit keys to set
“BITRATE”: Press digit keys to select.
"TIME LIST": 2 time periods can be set for a day; the DVR will automatically make video records according to
the setting. This function is available only with the timed recording mode. Press the【ENTER】key to enter
below setting interface.
15
User Manual for Mobile DVR
RECODA
RECORD TIME LIST
RECORD TIME LIST
DATE
EVERYDAY
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
SUNDAY
Note: System will auto start recording within the period in “Timed” setup.
TIME 1 TIME 2
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
SAVE
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
4.7.4 Sub-Stream Settings
Press the【ENTER】key to enter below setting interface.
SUB--
SUB
RESOLUTION：：
RESOLUTION
QUALITY：：
QUALITY
SITS RATE: 24/32/40/48/56/64/72/80/96/120/136/172/210
SITS RATE: 24/32/40/48/56/64/72/80/96/120/136/172/210
FRAME RATE: 01/01/01/02/02/03/04/05/07/10/13/15/20
FRAME RATE: 01/01/01/02/02/03/04/05/07/10/13/15/20
"Resolution": The default is CIF.
"Bit Rate": 16/24/32/40/48/56/64/72/80/96/128/160/200 bits.
Default is 96 bit, press 【ENTER】 key to enter
"Frame Rate": 01/01/01/02/02/03/04/05/07/10/13/15/20 frame
STREAM
STREAM
CIF/QCIF
CIF/QCIF
Medium/High/Low
Medium/High/Low
SAVE
SETUP
SETUP
16
User Manual for Mobile DVR
RECODA
Default is 10f, press【ENTER】 key to enter.
Click ’SAVE’ to save the configuration.
4.7.5 Power Management
POWER SETUP
POWER SETUP
POWER MODE： TIME /ACC
DELAY POWER OFF： ON/OFF
DELAY TIME： 5（MIN）
POWER ON TIME： HH:MM:SS
POWER OFF TIME： HH
:MM:SS
SAVE
"Power mode": start up and shut down mode by pressing 【ENTER】 key to select.
TIME: DVR will auto power on/off according to the preset time table.
ACC: System will auto power on/off according to vehicle acc switch on/off signal.
"DELAY POWER OFF": When this function is on, the DVR will continue making record for a while as per the
configuration. When this function is off, the DVR will shut down when ACC is off. Press ‘enter’ key to select.
“TIME”; Off---Shut down system at once. Press 【ENTER】key to select.
"DELAY TIME": Press digit keys
"POWER ON TIME": Press digit keys to select.
"POWER OFF TIME": Press digit keys to select.
to select. The range is between 3 and 300mins.
17
User Manual for Mobile DVR
RECODA
4.7.6 Alarm Settings
ALARM SETUP
ALARM SETUP
INPUT
ALARM
LEFT
RIGHT
BRAKE
OUTPUT
OUTPUT1
OUTPUT2
SAVE G-SENSORMOVE DETECT SPEED
Alarm input
Support 4ch alarm input.
"ENABLE": switch on/off.
ON---Enable alarm input;
OFF---Disable alarm input. Press the 【ENTER】 key to select on or off to enable or disable
ENABLE RECORDPWL
ON
ON
ON
OFF
ENABLE PWL
ON
OFF
HIGH
HIGH
LOW
LOW
HIGH
LOW
ON
OFF
ON
OFF
alarm input.
"Level Setting ": Setup input alarm level signal. HIGH---high electrical level input signal will enable alarm.
Press ‘enter’ to set the level. High or low level can be set with input signal; open or close can be set with output
signal.
"RECORD": ON---Enable alarm recording; OFF---Disable alarm recording. Press the【ENTER】to select on or
off to enable or disable recording.
Alarm output
Support 2ch alarm outputs.
“ENABLE”: On/Off switch.
ON---Enable alarm output;
OFF---Disable alarm output. Press the 【ENTER】 key to select.
PWL: power level output for alarm. High stands for high power level output and low refers to low power level
output. Select and press “SAVE” to save all setup.
MOVE DETECT
18
User Manual for Mobile DVR
RECODA
MOTION DETECTION
SPEED
CHANNEL
CHANNEL
CHI/CH2/CH3/CH4
CHI/CH2/CH3/CH4
THRESHOLD：0（0~60）（km/h）
LEVEL
LEVEL
HIGH/MID/LOW
HIGH/MID/LOW
SAVE
OVER SPEED
OVER SPEED
ENABLE：：
ENABLE
ON/OFF
ON/OFF
ENABLE
ENABLE
OFF/ON
OFF/ON
AREA
AREA
SETUP
SETUP
SAVE
G-SENSOR（This functions is available with M603B）
G-SENSOR setup, Press the 【ENTER】 key to enter below setting interface for G-sensor configuration:
19
User Manual for Mobile DVR
RECODA
SENSOR
GG--SENSOR
REAL LIMIT VALUES
X= -0.00 Y= -0.00 Z= -0.00
ADJUST
THRESHOLD VALUES
X: 2.00g
Y: 2.00g
Z: 2.00g
“LIMIT”: Limit value for X/Y/Z, Minimum value is 0.00g and Maximum value is 9.99g, press digit keys to
setup.
“ALARM”: G-Sensor alarm OPEN/CLOSE setup, press 【ENTER】to set it.
Alarm Open: Open alarm recording and alarm files will be recorded when X/Y/Z value over than “Limit
value” under record stautes
Alarm Close: Close alarm recording and alarm files will not be recorded when X/Y/Z value over than
“Limit value” under record stautes
“CHECK”: Adjust X/Y/Z current values when user start up device at first time, Press the【ENTER】key to
confirm. After “CHECK”, X/Y/Z value will be “0”
Remark: Please do remember to click “SAVE” to save data after setting.
ALARM: CLOSE/OPEN
SAVE
4.7.7 Security Settings
SECURITY
SECURITY
PASSWORD： ON/OFF
USER PWD： ******
CONF PWD: ******
INPUT NOT SAME！
ADMIN PWD： ******
CONFIRM : ******
SAVE
NOTICE：PASSWORD IS 6 NUMBERS！
20
User Manual for Mobile DVR
RECODA
Password setting:
"PASSWORD": ON---Enable password; OFF---Disable password, press the【ENTER】 key to select.
Select and press “SAVE” to save the configuration.
4.7.8 Network Settings:
Network parameters should be set on the device. The system will detect devices without any further setting if
the configuration is correct
.
NETWORK SETUP
NETWORK SETUP
LOCAL SETUP
IP ADDRESS: 192. 168. 000. 192
NETMASK：255. 255. 255. 000
GATEWAY: 192. 168. 000. 001
MAC：00：44：53：75：55：56
CENTER SET
TYPE：IP/DOMAIN
DOMAIN：www.123.cn
SERVER IP：192 . 168 . 001 . 000
CONTROL PORT：5678
MEDIA PORT： 5678
SAVE WIFIDDNS3G
Local network: RJ45 for LAN
Setup device IP address, mask and gate way.
Attention: IP address conflict with other host computer.
Center setup
Server IP: Set the IP address same as PC client.
Type: IP/DOMAIN
DOMAIN: Default is www.123.cn.
Control port: Default is 5678.
Media port: Default is 5678.
3G wireless transmission settings (this is available with M603B)
Press 【ENTER】 key to enter the following interface:
21
User Manual for Mobile DVR
RECODA
3G SETUP
3G SETUP
3G： ON / OFF
TYPE： WCDMA / EVDO / TD
APN： 3gnet
CENTER NO： *99#
USER NAME： card
PASSWORD： card
SAVE
“WIRLESS”: ON—enable wireless; OFF—Disable wireless, press the【ENTER】 key to select.
“TYPE”: WCDMA—WCDMA module; EVDO—EVDO module, TD-TD module press the【ENTER】 key to
select.
“APN”: APN CMWAP, Press the【Enter】 key to enable the keyboard window, then use left/right/up/down/
enter key to setup.
“CENTER NUM”: Center number, Press the【Enter】 key to pop out keyboard window, then use
left/right/up/down/ enter key to setup.
“USER NAME”: Press the【Enter】 key to pop up keyboard window, then use left/right/up/down/ enter key to
setup.
“PASSWORD”: Press the【Enter】 key to pop up keyboard window, then use left/right/up/down/ enter key to
setup.
Click “SAVE” to save all setup.
● DDNS
"DDNS": Cursor to the " DDNS ", Press the【ENTER】key to enter below interface.
22
User Manual for Mobile DVR
RECODA
DDNS SETUP
DDNS SETUP
DDNS： ON / OFF
TYPE： DYNDNS / 3322
USER NAME：
PASSWORD：
DOMIAN：
SAVE
DDNS: Close / Open, with 【Enter】 key to select.
"User Name", "Password": user name and password for setting DDNS, press 【Enter】 key to enter, then go to
the keyboard interface, move the cursor and input corresponding letter through press 【Enter】 key.
Click the “SAVE” after complete setup
Password:
Domian:
WIFI
" WIFI": Cursor to the " WIFI ", Press the【ENTER】key to enter below interface.
WIFI SETUP
WIFI SETUP
WIFI：：
ON / OFF
WIFI
ON / OFF
192.168.000.192
GATEWAY：：
GATEWAY
SUB--
SUB
PASSWORD：：
PASSWORD
AUTH MODE：：
AUTH MODE
ENCRYTP TYPE：：
ENCRYTP TYPE
DEFAULT KEY：：
DEFAULT KEY
IPIP：：192.168.000.192
MASK：：
MASK
SSID：：
SSID
ENCRYPT：：
ENCRYPT
LENGTH：：
LENGTH
WEP KEY：：
WEP KEY
192.168.000.001
192.168.000.001
255.255.255.000
255.255.255.000
WIFI
WIFI
ON / OFF
ON / OFF
OPEN / CLOSE
OPEN / CLOSE
NONE /WEP / TKIP/ AES
NONE /WEP / TKIP/ AES
64BITS / 128BITS
64BITS / 128BITS
1 / 2 / 3 / 4
1 / 2 / 3 / 4
SAVE
23
4.8 System Info
RECODA
User Manual for Mobile DVR
SYSTEM INFO
SYSTEM INFO
FIRMWARE VER：Mini001.00
HARDWARE VER：V0001
MCU VER：V0001
SD CAPACITY
SD NO.
SD NO.
SD1
SD1
SD2
SD2
"FIRMWARE VER": Software version number.
"HARDWARE VER": Hardware version number.
"MCU VER": Single-chip version number.
"SD NUM": Name of SD card.
"TOTAL ": the total capacity of SD card.
"Remaining ": The remaining space of SD cards
TOTAL
TOTAL
3.6842GB
3.6842GB
0KB
0KB
REMAINING
REMAINING
407.6875MB
407.6875MB
0KB
0KB
4.9 Management Tools
Management tools include log manager, disk manager, system default settings, CFG manager and PTZ
manager. .
24
User Manual for Mobile DVR
RECODA
MANAGE TOOL
MANAGE TOOL
4.9.2 Log Management
START TIME：2009-05-27 00:00:00
END TIME：2009-05-27 23:59:59
DATE TIME EVENT NAME
09/05/27 15：30：25 alarm in 1
09/05/27 16：10：37 alarm in 2
09/05/27 17：00：35 power on
09/05/27 17：30：56 alarm in 4
LOG MANAGE
DEFAULT SET CFG MANAGE
PTZ MANAGE OSD SET
LOG MANAGE
LOG MANAGE
DISK MANAGE
SEARCH
FIRST UP LAST DOWN
Log manager will record the alarm info including date, time and name
“START TIME”: press digit keys to set up the start time for an inquiry of a log
"END TIME": Until what time to search the logo, press digit keys to setup.
"SEARCH": press the enter key to search all log info in this time period. Press the direction keys to select
"FIRST", "UP", "NEXT", "LAST ", and press the【ENTER】 key go to corresponding page.
25
User Manual for Mobile DVR
RECODA
4.9.3 SD Card Management
DISK MANAGE
DISK MANAGE
SD FORMAT
SD SELECT：SD1/SD2
FORMAT CANCEL
The data will lo st against FORMAT , otherwise
please press 。
Disk management is used to format the SD cards.
"SD SELECT": to select SD1 or SD2 by pressing the ‘enter’ key.
"CANCEL": Cancel disk management operations, and return back to the management tool interface.
"FORMAT": Select the format button, and press the enter key to enable below window for formatting SD cards:
Warning:
CANCEL
’
’ ’
’
Format SD card?
Yes No
"Yes": press the【ENTER】key to start formatting.
"No": Cancel formatting and return back to the disk management interface.
26
4.9.4 Default Settings
RECODA
User Manual for Mobile DVR
Warning:
Default all settings?
Yes No
"Yes": Press the【ENTER】key to recover all parameters to the original default settings.
"No": Cancel this operation and return back to the management tool interface.
4.9.5 Config Management
Import and export config file
CONFIG MANAGE
CONFIG MANAGE
IMPORT CONFIG FILE:
IMPORT CONFIG FILE:
EXPORT CURRENT CONFIG FILE:
EXPORT CURRENT CONFIG FILE:
NOTICE:
NOTICE:
CONFIG FILE NAME: DVR.CFG
CONFIG FILE NAME: DVR.CFG
IMPORT CFG
EXPORT CFG
Import Configuration: Import the “DVR.CFG” file into device from the SD card
Export Configuration: Export the “DVR.CFG” file from device to the SD card
27
User Manual for Mobile DVR
RECODA
4.9.6 PZT Management
CHANNEL ADDRESS BAUDRATE
CHANNEL ADDRESS BAUDRATE
CH1
CH1
CH2
CH2
CH3
CH3
CH4
CH4
11（（0 ~ 255
11（（0 ~ 255
11（（0 ~ 255
11（（0 ~ 255
PTZ MANAGE
PTZ MANAGE
0 ~ 255））
0 ~ 255））
0 ~ 255））
0 ~ 255））
4800/9600/19200/38400/57600/115200
4800/9600/19200/38400/57600/115200
4800/9600/19200/38400/57600/115200
4800/9600/19200/38400/57600/115200
4800/9600/19200/38400/57600/115200
4800/9600/19200/38400/57600/115200
4800/9600/19200/38400/57600/115200
4800/9600/19200/38400/57600/115200
SAVE
5 Device Installation
OSD SETUP
OSD SETUP
REAL TIME DISPLAY
TIME:
YES \\NONO
TIME:
RECORD OVERLAY DISPLAY
VEHICLE NO:
VEHICLE NO:
TIME:
TIME:
GPS:
GPS:
SAVE
YES
YES\\NONO
YES
YES\\NONO
YES
YES\\NONO
YES
5.1 Cable Definition
5.1.1 Power Cable
Black color cable: connect with cathode on battery in vehicle
Red color cable: connect with anode on battery in vehicle
Yellow color cable: connect with ignition in vehicle.
28
User Manual for Mobile DVR
RECODA
Notes:
1: Please make sure the battery voltage range within 12-24V, otherwise device will break down when voltage
more than 24V
2: Please check out the three cables and make sure isolative between them after complete connection
3: Make sure connect the Black and Red cables with battery directly and never choose ground strap connection
way as GND, otherwise device cannot work normally
4: The yellow cable must be connected to the ignition; otherwise device will not support ignition switch
machines.
5.1.2 Audio/Video Input and Output Cable
29
User Manual for Mobile DVR
RECODA
Connector Name
Video Input VIN1~VIN4 4 VIN BNC connector
Video Output VOUT 1 VOUT BNC connector
Audio Input AIN1~AIN2 2 AIN BNC connector
Audio Output AOUT1~AOUT2 2 AOUT PCA connector
MIC Input MIC IN 1 MIC IN RCA connector
5.1.3 Alarm Input and Output Cable
Instruction
30
User Manual for Mobile DVR
RECODA
5.2. Main Board Outside View
5.2.1.DVRwithout 3G and GPS PCB
31
Alarm IN/OUT cable connector
Power cable connector
User Manual for Mobile DVR
RECODA
VI/VO AI/AO cable connector
5.2.2. DVR with 3G and GPS PCB
SD card holder
SIM card holder
3G module
3G antenna connector
GPS antenna connector
32
User Manual for Mobile DVR
RECODA
6 Syestem Upgrade User Guideline
6.4 MU-MINI-RFS.crc（Record File System）Upgrade
1. Cope files into SD card. Make sure files were copied totally
2. Insert SD card into device before power on
3. Power on the device and all indicator except SD1 and SD2 will be light.
4. “LOADING” and “ERASING FLASH”showed on window, mainwhile PWR light one and CH1 indicator on
front pannel flicking, it means upgrading.
5. Progress bar will be showed on the window (1%--100%). When the bar is full, it means upgrade complete.
Remark: After upgrade, the file in SD card will be deleted automatically.
6.5 MU-MINI-APP.crc（Application Program）Upgrade
1. Process same as above.
Remark: After upgrade, a new debugger information file will appear automatically in SD card.
6.6 MCU Upgrade
1. Process same as above.When MCU upgrade, SD1 indicator will be light..
2.“UPGREAD MCU”and “REBOOT！”will show in turn..
3. Device will restart automatically when upgrade complete.
6.4. Upgrade Check out
Go back to monitor window after upgrade, and then press “INFO’ on remote control or go to ‘System info”
interface to check out upgraded version.
Note:
1) Make sure stop any operation during upgrading.
2) Make sure the file which need to be upgraded has been saved into SD card and device must be in “power
off” statues before upgrade.
3) Upgrade step by step. The correct sequence is Record File SystemApplication ProgramMCU.
4) Device will restart automatically when upgrade complete.
33
User Manual for Mobile DVR
RECODA
7 3G User Guideline
7.4 Working principle representation
Remote Control
7.5 Installation Guideline
3G antenna connector
WCDMA
3G/EVDO
HSPA
Wireless network
G Sensor,GPS
Remote monitor center
External Module
PC Management software
SIM card holder
3G Module
34
User Manual for Mobile DVR
RECODA
7.6 Parameter Settings
7.6.2 Network Setting
NETWORK SETUP
NETWORK SETUP
LOCAL SETUP
CONTROL PORT：5678
SAVE WIFIDDNS3G
IP ADDRESS: 192. 168. 000. 192
NETMASK：255. 255. 255. 000
GATEWAY: 192. 168. 000. 001
MAC：00：44：53：75：55：56
CENTER SET
TYPE：IP/DOMAIN
DOMAIN：www.123.cn
SERVER IP：192 . 168 . 001 . 000
MEDIA PORT： 5678
Picture 1
1） Server IP must be globe IP
2） Default Port is 5678.
3） If the computer which running Fclient in local area network, Port map must be setting in router
(Please make a reference in picture 2)
4） There are two types IP setting: Domain and IP.
5） If customer set it as Domain, the user router must support DDNS. (Please make a reference in picture
3)
Picture 2
35
User Manual for Mobile DVR
RECODA
Picture 3
7.6.3 Wireless setting
are 3 types: WCDMA, EVDO and TD.
ere
Th
When user set it, please make sure the type you select must be match with the type of 3G modules (Please
make a reference in picture 3)
3G SETUP
3G SETUP
3G： ON / OFF
TYPE： WCDMA / EVDO / TD
APN： 3gnet
CENTER NO： *99#
USER NAME： card
PASSWORD： card
SAVE
Picture 4
7.6.4 Statues check out
7) Press F1 key on remo
information about 3G modules. Such as whether 3G or SIM card exists or not. Signal and dial-up statues
36
te control under preview interface to check out current statues. It will show the
User Manual for Mobile DVR
RECODA
(Please make a reference in picture 4)
7.7 PC software setting
Make Fclient software running first. When device dial-up successfully, it will connect with sever
setted by user automatically. Green color means connecting success (Please make a reference in
picture 5)
Remote ID
Picture 5
8 F.A.Q
Wireless Module
8.4
1) Q: How to setup network after choose the wireless module?
A: Please make a reference on eighteenth page in User Manual.
2) Q: When wireless module cannot work, how to solve it?
A: Go back to preview interface, and press F1 button on remote control to check out whether network has
been dialed up. You can also check out whether SIM card in working statues, wireless module existent or not,
37
User Manual for Mobile DVR
RECODA
and the other possibility is antenna not connect well.
3) Q: Why 3G can not transmit data?
A: Probably of the reason is as follows:
1) Didn’t connect 3G antenna
2) Didn’t insert SIM card;
3) Wireless and network setup in a wrong way
4) The PC setup not matches with 3G. For example, the gateway router have not port mapping.
5) Have never turn on PC play back tool.
Remark: For further more information about Network and Wireless setup, please make a reference on
page eighteenth and nineteenth in User Manual.
4) Q: What kind of overwritten way use in device when two SD cards circularly recorded
A: Record one by one. When the first one has no capacity, the second one will start to record. If two pieces
of SD card are full, the device will delete the record data start from the one which record on the earliest
time.
5) Q: Whether can achieve the 3 G long range previews and local record carry on synchronously or not?
A: Real-time preview in control centre and save local record can be achieved.
6) Q: How about the 3G transmit speed?
A: It will depend on the bandwidth of each Country. Currently in China, 4 channels video can be transmitted
at the same time, the best situation is 15f/s/ch.
7) Q: How long time delay when 3G long range previews?
A: It will depend on the bandwidth of each Country, the transmission delay within 5-20s in China.
8) Q: How to download record file through 3G?
A: User can download files manually.
9) Q: Whether can set record in system in a long range through 3G or not?
A: Sorry, it isn’t realization currently.
10) Q: Is it the long range switch device operation?
A: Temporary nonsupport, but engineer can add this function into system according to customer’s
acquirement.
11) Q: Is it all right to support SDHC card?
A: Support SDHC card.
8.5 General Problems
Problem 1: The power indicator not bright after power on.
The following reasons will cause the power indicator not works:
38
User Manual for Mobile DVR
RECODA
1) Electric voltage isn’t within the range of 8-36 V;
2) The fuse in power cable was burned;
3) ACC setting failure or ignition connects in a wrong way
Problem 2: ERR indicator keep on light.
The following errors will cause the ERR indicator keep on light.
1) Two SD cards didn't be inserted.
2) The system partition under abnormal statues, even the SD card be inserted, it also can cause the
equipments can not be identified;
3) MCU not works;
4) SD card cannot read and write in normal;
Problem 3: Channel indicator not works
The following reasons will cause the Channel indicator not works:
1) No video signal input;
2) Cameras break down;
3) Indicator is damaged;
4) The system cannot be operated in normal.
Problem 4: SD card indicator not works or keep flicker
The SD card indicator has 3 medium statuses: OFF, ON and Flicker; respectively meaning as
follows:
OFF: This SD card didn't be inserted or can not be identified by the equipments;
ON: This SD card existence, but it isn't the one that is recording image at present;
Flicker: This SD card exists and it is the one that is recording image at present;
Possible reason is as follows:
1) User doesn’t setup record in system;
2) Two SD cards all have already recorded full, but overwritten function was “off” in system
3) Although Overwritten function was “on” in system, all the files in two SD card are alarm record
ones. These files cannot be deleted automatically so SD card can not memory new record files
Remark: For further more information about indicator, please make a reference on page sixth in User
Manual.
Problem 5: Video Lost in certain channel
Possible reasons are as follows:
1) This channel has no video input.
2) The camera of this channel breaks down or work abnormality;
39
User Manual for Mobile DVR
RECODA
3) If the camera takes an electricity power from the equipments directly, may be the equipment’s
electric voltage isn't enough to make camera work as usual;
4) The cable that links this channel has problem
Problem 6: Record files have no audio
Probably of the reason is as follows:
1) Audio function setup in “OFF” mode in system
2) Use wrong input cables
Audio input including two types. One is LINE IN and the other one is MIC IN. It will be showed on
Record setup interface in system. User must select one of them before make a record. The cable
AIN1 and AIN2 match with LINE IN mode, however cable MICIN match with MIC IN mode.
3) Audio output cable didn't connect or connect in a wrong way;
Remark: User can make a reference about Audio setup on page thirteenth in user manual.
Problem 7: Device cannot make a record successfully.
The following reasons might cause this problem:
1) Recode mode setup in a wrong way
There are 3 kinds of record mode: Auto, Timed and Alarm. Before recording, user must to setup
record mode in system. If it was set in “Alarm” mode but has no alarm right now,” device will not
make a record. If it was set in “Timed” mode but the current time not within timed period, same as
above, device will not make a record as well.
2) Overwritten function was “OFF’ and the capacity of SD card less than 500M, in this situation
device will stop recording.
3) The ERR light of front panel shine. Can pass to look into a system information, If SD card space
shows in “0”please check whether SD card has been formatted before use and inserts or not.
4) Record mode be set to “OFF” in each channel. Please press “Enter” button on remote control to
switch “OFF” to “ON” mode before record, otherwise device will not make any record.
Remark: Please make a reference on page thirteenth in user manual.
Problem 8: Alarm input invalid.
May be the following reason to cause this problem:
1) Alarm setup in a wrong way in system.
2) Alarm input cable did not connect to the device or cable not works
3) Alarm trigger signal to get an electric shock failure
Problem 9: Alarm output invalid.
Possible reason is as follows:
1) Cable connection in a wrong way.
40
User Manual for Mobile DVR
RECODA
2) System setting in a wrong way
Remarks: More information and user guidelines please find on page fifteenth in user manual
Problem 10: GPS signal lost
GPS has no signal, probably of the reason is as follows:
1) Didn’t connect GPS antenna;
2) The GPS antenna put indoors;
3) The GPS module damages;
4) The software of device M603A nonsupport this function;
Problem 11: G-Sensor data abnormal.
The reason as below:
1) The software of device M603A nonsupport this function;
2) The G-Sensor damage;
3) User did not check the X/Y/Z data in system
Remarks: More information and user guidelines please find on page seventeenth in user manual
Problem 12: Can’t playback files on PC successfully.
Possible reason is as follows:
1) Have never chosen a record file or document path; please choose the path that records file
first before playback.
Problem 13: Remote control not works:
Probably of the reason is as follows:
1) The remote control didn't pack battery;
2) The remote control damages;
3) The equipment breaks down;
Problem 14: During playback, the map doesn't show.
Possible reason is as follows:
1) Net cable did not connect to PC
2) Net works, but the computer can not get to the Internet;
41
Loading...