Recharge Mower PMLI-14 Safety, Assembly, Operating And Maintenance Instructions

Instruction Manual

36V Lithium Push Mower

PMLI-14

This Manual Contains Important Information Regarding: SAFETY, ASSEMBLY, OPERATION

AND MAINTENANCE. Please Read And Keep

This Book For Future Reference.

2

1

2 3 4 5 6 9 7

10 8 11

12

13

14 8 16

17

18

15

3

Intended Use

1

Safety button

11

Battery pack

2

Switch lever

12

Safety key

3

Handle knob

13

Power cord for charger

4

Cable clip

14

Charger

5

Battery cover

15

Mulching Insert

6

Height adjustment lever

16

Battery temperature indicator

7

Upper push bar

17

Battery power indicator

8

Grass catcher indicator

18

Switch button for indicator

9

Grass catcher bag

10

Quick fold lever

■ This lawn mower is designed for residential use ONLY, not for commercial use.

■ Use only for intended purpose.

Safety Notes

Warning! It is important that you read, fully understand and observe the following safety

precautions and warnings. Careless or improper use of the machine may cause serious or fatal injury.
The user is responsible for any accidents involving other people or other people„s property.

Explanation of symbols on the lawnmower

General hazard safety alert.

Read instruction manual.

Beware of thrown or flying objects to bystanders.

Keep bystanders a safe distance away from the machine.

Sharp blade. Beware of severing toes or fingers.

Switch off, remove battery power plug from battery power socket before adjusting, cleaning, performing

any maintenance work and before leaving the lawnmower unattended for any period.

4

Not applicable.

Wait until all machine components have completely stopped before touching them. The blade

continues to rotate after the machine is switched off. A rotating blade can cause injury.

Do not mow in the rain or leave the lawnmower outdoors when it is raining.

Beware electric shock hazard.

Keep away from cords.

Only use the battery charger indoors.

Battery charger contains a safety transformer.

■ Never allow children or people unfamiliar with these instructions to use the lawnmower. Local regulations may
restrict the age of the operator.

■ Never mow while people, especially children or pets are nearby.

■ The operator or user is responsible for accidents or hazards occurring to other people or their property.

■ Do not operate the lawnmower when barefoot or wearing open sandals. Always wear substantial footwear and

long trousers.

■ Thoroughly inspect the area where the lawnmower is to be used and remove all stones, sticks, wires, bones
and other foreign objects.

■ Before using, always visually inspect to see that the blade, blade bolt and cutter assembly are not worn or
damaged. Replace worn or damaged blade and bolt in sets to preserve balance.

■ Mow only in daylight or in good artificial light.

■ Avoid operating the lawnmower in wet grass, where feasible.

■ Walk, never run.

■ Never operate the appliance with defective guards or shields or without safety devices, for example deflectors

and/or grass catchers in place.

■ Mowing on banks can be dangerous:

– Do not use the mower on a slope steeper than 15º maximum.
– Always be sure of your footing on slopes or wet grass.
– Mow across the face of slopes – never up and down.
– Exercise extreme caution when changing direction on slopes.

■ Use extreme caution when stepping back or pulling the lawnmower towards you.

■ Never mow by pulling the mower towards you.

■ Stop the blades if the lawnmower has to be tilted for transportation when crossing surfaces other than grass

and when transporting the lawnmower to and from the area to be mowed.

■ Do not tilt the machine when starting or switching on the motor, except if the machine has to be tilted for starting
in long grass. In this case, do not tilt it more than absolutely necessary and tilt only the part which is away from
the operator. Always ensure that both hands are in the operating position before returning the machine to the
ground.

5

■ Switch on the lawnmower according to instructions and with feet well away from the blade.

■ Do not put hands or feet near or under rotating parts. Keep clear of discharge opening at all times.

■ Never pick up or carry the lawnmower while the motor is running.

Under the following conditions, the unit must be switched off, the key removed and the unit must be brought to a
standstill:

– leaving the lawnmower
– unblocking a blade
– intending to check, clean or work on the lawnmower
– you have encountered a foreign object, in which case you should check the lawnmower for damage and carry

out any necessary repairs.

– the lawnmower is vibrating heavily (switch off immediately and ascertain the cause).
– you wish to change the settings or carry out cleaning work.
– you wish to check whether the connection cables have become tangled or damaged.

■ Keep all nuts, bolts and screws tight to be sure that the lawnmower is in safe working condition.

■ Check the grass catcher bag frequently for wear or deterioration.

■ Replace worn or damaged parts for safety.

■ Ensure replacement cutting blade of the right type is used. Ensure replacement parts fitted are from

manufacturer.

■ Protect the battery charger from rain and moisture. The penetration of water in a battery charger increases the
risk of electric shock.

■ Recharge only with the charger supplied by the manufacturer. A charger that is suitable for one type of battery
pack may create a risk of fire when used with another battery pack.

■ Do not charge other batteries. The battery charger is suitable only for charging the battery pack of this lawn
mower within the listed voltage range. Otherwise there is danger, fire and explosion.

■ Keep the battery charger clean. Contamination may cause the danger of electric shock.

■ Check the battery charger, cable and plug each time before using. Do not use the battery charger when defects

are detected. Do not open the battery charger yourself and have it repaired only by qualified personnel using
original spare parts. Damaged battery chargers, cables and plugs increase the risk of electric shock.

■ Do not operate the battery charger on easily inflammable surfaces (e. g. paper, textiles, etc.) or in combustible
environments. There is danger of fire due to the heating of the battery charger during charging.

■ Use product only with specifically designated battery packs. Use of any other battery packs may create a risk of
injury and fire.

■ When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.

■ Do not open the battery pack yourself. There is danger of a short circuit.

■ Do not short circuit the battery.

■ Touching electrically conductive parts of battery pack might result in an electric shock. Be sure to wear rubber

gloves before inspection or maintenance work.

■ Protect the battery against moisture and water.

■ Store the battery only within a temperature range between –4°F (–20°C) and +104°F (+40°C). As an example,

do not leave the battery in your car in the summer.

6

Lawn mower

Model: PMLI-14
Mains:36V, 4Ah
Charging time: 2-3 hours
Cutting width: 380mm
No load speed:3000rpm
Cutting system: rotary blade
Cutting height: 6 settings, 25-75mm
Grass catcher bag capacity:40L

Battery Pack

Art.No.:LI-14BATT
Battery type: Lithium Battery
Battery Voltage:36V,4Ah
Charging time: 2-3 hours

Battery Charger

Art.No.:PAS42AA-W04201000
Input:100-240V-50/60Hz
Output voltage:42V
Charging current:1.0A

Product Specification

Assembly

Do not connect the battery or the safety key before the mower is completely assembled.

1. Fasten push bars

The push bar is already fully assembled. It only needs to be unfolded to the desired position.
First unfold the quick fold lever and loosen the handle knob (See Figure 1).
Expand the handle, make sure the upper handle and lower handle match well.
Then screw them tight with the handle knob and swing nuts. The swing nuts should be hand tightened only.
Never use a spanner or any other tool to tighten them.
Secure bottom of handle with locking mechanism provided. See Figure 2

Figure 1 Figure 2