STEP 6
STEP 8
Install Square Leg(5)on Panel(B)with
Screw(2).
(2)x12pcs
(5)x4pcs
STEP 7
Attach Bottom Panel(B) to assembled unit
with Screw(1).
Upright the unit.
Attach Back Panel(H)to the back side
with Power Pin(6).
(6)x16pcs
STEP 9
Unfold the Bin(9)and slide into the
storage.
15
(9)x4pcs
Approx. 30 minutes
Recomm. 2 Person
Assembly Instruction
Multipurpose Storage Cabinet
with 4 Bin-Type Drawer
23.6”(W) x 33.1”(H) x11.8 ”(D)DIMENSION :
(1)x6pcs
5
5
*Unit in Pound(lbs)
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
Tools Required
No Hardware List Qty No QtyParts List
Long Screw
1
Short Screw
2
Long Plastic Dowel
3
Short Plastic Dowel
4
Square Leg
5
6pcs
12pcs
2pcs
18pcs
4pcs
Top Panel
A
Bottom Panel
B
Left Side Panel
C
Right Side Panel
D
Center Panel
E
1pcs
1pcs
1pcs
1pcs
1pcs
STEP 1
Insert Dowel(4) to Panel(G1)(G2)(G3).
Insert Dowel(3)&(4)to Panel(F).
Power Pin
6
7
Cam-Lock Nut
8
Cam-Lock Srew
Bin
9
16pcs
6pcs
6pcs
4pcs
Short Shelf Panel
F
Long Shelf Panel
GG
(G1)(G2)(G3)
Back Panel
H
1pcs
3pcs
2pcs
STEP 2
Insert Cam-Lock Nut(7)and Dowel(4)into
Panel(C)(D)(E).
**Arrow on Cam-Lock Nut should be pointing
toward hole.**
(6)x2pcs
STEP 4
Screw Cam-Lock Screw(8)into the
pre-drilled holes on Panel(A).
(8)x6pcs
STEP 3
Attach Shelf Panel(G)to Panel(C)&(E).
Attach Panel(F)to Panel(E)&(D).
STEP 5
Attach assembled unit to Panel(A)and
tighten Cam-Lock Nut(7) using phillips
screwdriver.
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
Loading...