Shoe
Storage Bench
Parts -
Identify parts before assembling.
Ax1
Top panel
Ex2
Inner shoe dividers
Ix1
Right side panel
Fx1
Drawer panel
Jx1
Left side panel
Bx2
Drawer dividers
Cx1
Shoe panel
Kx2
Gx1
Bottom panel
Back panel
Cushion
Dx2
Outer shoe dividers
Hx1
Moulding
Lx20
Cam lock
Nx31Mx20
Cam screw Wood dowel
Px14
Short screw Handle screw
Rx3 Sx3
Ox8
Long screw
Handle
Assembly
1
Insert hardware into assembly pieces as shown.
(N)
(M)
(N)
(M)
(M)
(N)
(M)
(N)
(M)
(N)
(N)
(N)
Assembly cont’d
2
Insert shoe dividers (D/E) into slotted shoe panel (C) so that
panels are in the following order: D, E, E, D
3
Attach drawer dividers (B) to the top side of drawer
panel (F) using long screws (O). The top side of panel F
has the wider-set holes.
(O)
4
Insert 4 cam locks (L) into the side predrilled
holes on shoe dividers (D). Attach drawer panel
(F) to shoe dividers (D/E). Turn cam locks to
lock assembly.
5
Insert 4 cam locks (L) into the side predrilled holes in (B). Attach top
panel (A) to drawer dividers (B). Turn cam locks to lock assembly.
6
Attach bottom panel (G) to shoe dividers (D) and (E).
7
Screw bottom panel (G) into place using long screws (O). Insert 2 cam locks (L)
into predrilled holes in moulding (H). Attach moulding to bottom panel (G). Turn
cam locks to lock assembly together.
(O)
H
Assembly cont’d
8
Insert 10 cam locks (L) into predrilled holes on the sides of
assembly that line up with cam screws in side panels (I/J).
Attach side panels (I/J) to assembly. Turn cam locks (L) in
assembly to lock assembly together.
9
Attach back panels (K) using short screws (P).
(P)
10
Remove adhesive backing from hook and loop strips on the underside of
cushion. Position on the top side of top panel (A) and press into place.
Cushion
11
Unfold drawers and lay bottom panel inside
as a liner / base.
Attach handles: fit handles (S) on drawer
fronts and secure from inside the drawer
with screw (R).
Insert drawer into cubby. FINISHED.
NOTE: Screws and washers may
already be screwed into handles.
Loading...