RearviewSafety RVS-773617N User Manual

Camera

White-Video (in)

Yellow-Video (in)

-12V

Red-Power

power to either input.
(white and Yellow cables ) to alternate between inputs cut
is also a "VIDEO IN" cable. Monitor accepts 2 video inputs
camera to the display in your vehicle. White RCA cable (plug)
DC12V power system. Connect the video output (yellow) of the
Connect power cord 12+ (red) and 12V- (black) to your vehicles
Mount the camera adjust the lens of the camera to its position.

switch/fuse line and the black wire to ground.
line 12V+ to reverse gear which can be an accessory
side and Monitors Side and than attach Monitors Red power
black wire to Ground. Connect 15' RCA video cable Cameras
red power line 12V+ to the vehicles reverse tail lights and the
when vehicle goes in reverse. Simply connect the Camera's
To automatically have the camera and Monitor turn ON only

the black power line to ground.
ignition power which can be an accessory switch/fuse line &
vehicle activates, Simply connect the red power line 12V+ to
To automatically have the camera & monitor turn ON when

Power (in)

Video (in)

Power Power Brightness

by law.
required to be installed

motor vehicle equipment
mirror or for any other
substitute for rear-view
intended for use as a
Camera System is not
your vehicle. The Backup
view mirror that exist in
aid to your standard rear­installed as a supplement
System is intended to be
The Backup Camera

and operate the unit.
be able to properly install
With this manual you will

.

.

while operating the vehicle.
or indirectly, to the driver
location that is visible, directly

of the driver's seat or in any
located forward of the back
TV, TV monitor or screen
equipped with a
drive a motor vehicle
unlawful for a person to
In most jurisdictions, it is
vehicle.
driver while operating the
directly or indirectly, to the
location that is visible,
driver's seat or in any
forward of the back of the
TV viewer or screen located
equipped with a
drive a motor vehicle
unlawful for a person to
In some jurisdictions, it is

Installation Location

many years of trouble-free.
designed to provide you with
Your Backup Camera System is
Backup Camera System.
purchase of a Rear View

Congratulations on your

installation

Please read this manual before proceeding

Installation

Warranty

One Year Warranty

Rear View Safety Inc. warrants this product against material defects for a period of
one year from date of purchase. We reserve the right to repair or replace any such
defective unit at our sole discretion. Rear View Safety Inc. is not responsible for a
defect in the system as a result of misuse, improper installation, damage or mis­handling of the electronic components. Rear View Safety Inc. is not responsible for
consequential damages of any kind.

This warranty is void if: defects in materials or workmanship or damages result from
repairs or alterations which have been made or attempted by others or the
unauthorized use of nonconforming parts; the damage is due to normal ware and tear,
this damage is due to abuse, improper maintenance, neglect or accident: or the
damage is do to use of the Rear View Safety Inc. system after partial failure or use with
improper accessories.

Warranty Performance

DURING THE ABOVE WARRANTY PERIOD, SHOULD YOUR REAR VIEW
SAFETY PRODUCT EXHIBIT A DEFECT IN MATERIAL OR WORKMANSHIP,
SUCH DEFECT WILL BE REPAIRED WHEN THE COMPLETE REAR VIEW
SAFETY INC. PRODUCT IS RETURNED, POSTAGE PREPAID AND INSURED, TO
REAR VIEW SAFETY INC. OTHER THAN THE POSTAGE AND INSURANCE
REQUIREMENT, NO CHARGE WILL BE MADE FOR REPAIRS COVERED BY THIS
WARRANTY.

Warranty Disclaimers

NO WARRANTY, ORAL OR WRITTEN, EXPRESSED OR IMPLIED, OTHER THE
ABOVE WARRANTY IS MADE WITH REGARD TO THIS REAR VIEW SAFETY INC.
REAR VIEW SAFETY INC. DISCLAIMS ANY IMPLIED WARRANTY OR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE AND
ALL OTHER WARRANTIES. IN NO EVENT SHALL REAR VIEW SAFETY INC.
LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR PUNITIVE
DAMAGES OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR
DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE
OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY
CLAIMS FOR LOSS OF PROFITS.

IMPORTANT NOTICE

Product Manual
InstalIation Instructions

Rear View Camera System

RVS-773617

© 2010-2011 Rear View Safety Inc.

Product Info

Product Info

Sensor

TV System

Effective Pixel

Electronic Shutter

Scanning System

Sync System

Resolution

Lens Angle

Sensor Area

Video Output

S/N Ratio

Water proof

Minimum Illumination

Current Consumption

Power Supply

Operation Temperature

Storage Temperature
Other Items

Monitor Dimensions

CMOS

PAL

648 x 488 pixel LCD screen

1/50-1/100,000 sec

2:1 Interlace

Internal

420 TV Lines

o

170

5.961mm X 4.276mm

1.0Vp-p 75 Ohm

More than 48db

Ip67

0.1Lux (0 Lux With LED)

No More 300mA

DC 12V+10%

-20 C~60 C (Rh95% MAX)

-30 C~60 C (Rh95% MAX)

Automatic white balance,
Agc and BLC

3.3/4"(W) x 3"(H) x 3/4" (D)

1/60-1/100,000 sec

NTSC

Product Includes:

3.5” LCD color monitor
170° CMOS Camera with night vision
15' extension cable for camera
2 Power cables, for Camera and Monitor
Camera bracket for surface-mount installation

3.5” LCD color monitor

Features:

Sharp 648 x 488 pixel LCD screen
Waterproof IP67 rating
12V power supply
Night-vision camera
Small, compact size camera
Easy installation

Installation:

1 – 2 hours
Automotive electronic knowledge an asset
2 screw holes may be required for surface mount installation (camera bracket)
Need to run wiring from the back of the vehicle to the front of the vehicle

This ingenious backup car system will take away the mystery of what's going on
behind your vehicle. The backup camera system displays the reverse image on
the monitor, duplicating and clarifying the view seen on the rear-view mirror. It's a
perfect solution to get rid of that poor rear-view visibility on any vehicle. The
system is complete with a color 3.5” LCD monitor, 170° CMOS Surface Mount
camera with night vision, and all necessary wires, connectors and mounts. The
system is weather proof, strong and reliable, shock resistant and comes with a
full-year warranty.

Rear View Safety Inc. reserve the right to change or modify product specifications
or measurements without notice

.

RCA cable

o

170 Camera

Power cables

WARNING

nnThe monitor should be situated

away from direct sun light, heat,
water or moisture.

This product is made with precise
electronic components that should
be handled with care.

n Make sure the monitor stand is

firmly fixed to secure location.

n Please take special care to the

wire positioning while installing the
rear view system in order to avoid
wiring damage.

Information

IN NO EVENT SHALL SELLER OR
MANUFACTURER BE LIABLE FOR
ANY DIRECT OR
CONSEQUENTIAL DAMAGES OF
ANY NATURE, OR LOSSES OR
EXPENSES RESULTING FROM
ANY DEFECTIVE PRODUCT OR
THE USE OF ANY PRODUCT.

SAFETY PRECAUTIONS

n

The rear view system is intented to be
used when the vehicle is in reverse.
Please do not watch movies or operate
the monitor while driving. It may result
in accident because of distraction.

Do not install the monitor where it may

n

obstruct drivers view or obstruct an air
bag device.

n Do not attempt to service this product

on your own. If the system has any
problem, please disconnect power to
the unit and contact customer service.

n Dropping the unit may cause possible

mechanical failure.

If you have any questions about

this product contact

, :

Troubleshooting

Monitor will not power up /
no backlight on power button

• Make sure monitor is powered up.

• Check fuse

• Check 12v+ to monitor.

• Check ground connection.

No image on screen

• Verify camera is on correct camera input.

• Verify cable is connected to monitor.

• Verify camera is connected to cable.

• Connect known good camera and cable to monitor.

PLEASE NOTE THAT THE CAMERA AND MONITOR

BOTH NEED TO HAVE ITS OWN POWER SUPPLY.
RCA VIDEO CABLE MUST BE PLUGGED INTO
CAMERA AND MONITOR.