Rear view safety RVS-2770-DVR Instruction Manual

Instruction Manual

Quad View

Backup Camera System with Built-In DVR

RVS-2770-DVR

The product may be dierent from how it is described based on what

Reverse With Condence ™

Please read this manual before using system.

software version is being used.

1

MEN

U

TABLE OF CONTENTS

①

①Record key ②Left/CH L Shortcut key ③Left/CH L Shortcut key ④Menu

⑤Down/CH B Shortcut key ⑥Up/CH F Shortcut key ⑦OK/Dual/Triplex/Quad Swith ⑧ Power

②

③

④

⑤

⑥

⑦

⑧

Introduction..............................03

Safety Information.............................. 04-06

Before Beginning Installation . . . . . . . . . . . . . . . . . . . . . . . 07

Monitor Features.......................... . . . . 08

Precautions. . . .......................... . . . . 09

Monitor Technical Parameters...........................10

Remote Control..................................11

Monitor Menu.......................... . . . . . 12-26

Camera Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Camera Specication. ..............................28

Troubleshooting.................................29

Warranty & Disclaimer........................ . . . 30-31

2

Rear View Safety

NOTE!

Please read all of the installation instructions
carefully before installing the product. Improper
installation will void manufacturer’s warranty.

Congratulations on purchasing a Rear View Backup

Camera System!

With this manual you will be able to properly install and

operate the unit.

The Backup Camera System is intended to be installed as a
supplement aid to your standard rear view mirror that already exists
in your vehicle. The Backup Camera System should not be used as a
substitute for the standard rear view mirror or for any other mirror

that exists in your vehicle.

In some jurisdictions, it is unlawful for a person to drive a
motor vehicle equipped with a TV viewer or screen located forward of
the back of the driver’s seat or in any location that is visible, directly

or indirectly, to the driver while operating the vehicle.

INTRODUCTION

Reverse With Condence ™

3

Please read the entire manual and follow the instructions and

warnings carefully. Failure to do so can cause serious damage and/or

injury, including loss of life. Be sure to obey all applicable local

trac and motor vehicle regulations as it pertains to this product.

Improper installation will void manufacturer’s warranty.

USAGE:

• The Rear View Camera System is

designed to help the driver safe­ly detect people and/or objects
helping to avoid damage or injury.
However, you the driver, must use it
properly. Use of this system is not a
substitute for safe, proper or legal
driving.

• Never back up while looking at the

monitor alone. You should always

damage or injury. Always back up
slowly.

• The Rear View Camera System is

not intended for use during exten­sive back-up maneuvers or backing
into cross trac or pedestrian walk­ways.

•Please, always remember, the area

displayed by the Rear View Camera

check behind and around the vehi-

SAFETY INFORMATION

cle when backing up, in the same
way as you would if the vehicle did
not have the Rear View Camera
System. If you back up while looking
only at the monitor, you may cause

4

System is limited. It does not display
the entire panorama that is behind
you.

Rear View Safety

INSTALLATION:

• Electric shock or product

malfunction may occur if this
product is installed
incorrectly.

• Use this product within

the voltage range specied. Failure
to do so can cause
electronic shock or product
malfunction.

or disconnected wire may cause a
re.

• While installing the Rear View

System be careful with the wire
positioning in order to avoid wire
damage.

• The Rear View System should only

be used when the vehicle is in
reverse.

SAFETY INFORMATION

• Take special care when

cleaning the monitor.

• Make sure to rmly ax the prod-

uct before use.

• If smoke or a burning smell

is detected, disconnect the
system immediately.

• Where the power cable may touch

• Do not watch movies or

operate the monitor while driving;
as it may cause an
accident.

• Do not install the monitor

where it may obstruct drivers
view or obstruct an air bag
device.

a metal case, cover the cable with
friction tape. A short circuit

• Dropping the unit may cause

possible mechanical failure.

Reverse With Condence ™

5

If you have questions about this product, contact:

Rear View Safety

1797 Atlantic Avenue

Brooklyn, NY 11233

Tel: [phone]

IN NO EVENT SHALL SELLER OR MANUFACTURER BE

SAFETY INFORMATION

LIABLE FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES OF

ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM

ANY DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT.

6

Rear View Safety

Before drilling please check that no cable or wiring is on the other side
of the wall. Please clamp all wires securely to reduce the possibility
of them being damaged while vehicle is in use. Keep all cables away

from hot or moving parts and electrical noisy components.

We recommend doing a benchmark test before installation

to insure that all components are working properly.

Step 1: Choose the monitor and camera locations.

Step 2: Install all cables in vehicle, when necessary a 0.8 (20mm)
hole should be drilled for passing camera cable through vehicles
walls. Install split grommets where applicable.

Step 3: Once all cables and wiring have been properly routed, perform
a system function test by temporarily connecting the system.

BEFORE YOU BEGIN

Reverse With Condence ™

7

Monitor Features

- Monitor is very durable and can be used with tractors, harvesters,
passenger buses or other heavy duty vehicles

- 7" high resolution color TFT-LCD monitor, 4 video inputs, multiple
viewing options (single/dual/tri/quad)

- Built-in DVR supports 256M-32G SD cards

- Power input: DC11-32V

- Brightness: 400 cm/m2 (LED backlight display has constant voltage/
current circuit protection. This prolongs LED life and raises the work­ing temperature range)

- PAL/NTSC

- Monitor circuit has battery reverse protector (+/-)

- Monitor OSD menu features: trigger delay setting, 4 channel image
modes (NOR/MIR/UP/DOWN), adjustable display mode for each trig­ger cable

- Shortcut key ( ) to each channel single image display

- Some display modes can be turned ON/OFF, adjustable trigger
priority

MONITOR FEATURES

8

Rear View Safety

Operating Precautions

1. The device may be powered by a 12/24 volt battery or the vehicle's
electrical system.

2. Make sure all cables are connected properly. Improper cable connec­tions may damage the monitor. Remove power cable connections when
not using monitor.

3. The back-up battery can be recharged when the power is on.

4. When battery is fully charged, recharging will automatically stop.

5. If battery is not used for a while, it may take longer to charge.

Warning!

1. This monitor is high voltage. Only professionals should open the moni­tor's case.

2. Do not watch the video while driving unless you are monitoring the rear
view camera display.

Special Note

Occasionally, a few highlights or dark spots may appear on the LCD screen. This
doesn’t necessarily indicate any monitor defects. Never try to repair this device
yourself. If any problems occur, immediately turn the display o and notify our
company or an authorized dealer. Any disassembly or modication may lead to

PRECAUTIONS

damage and will also void the warranty.

Reverse With Condence ™

9

Monitor Technical Parameters

Compression

Power Consumption

8W Max（Without load

Display Device Color TFT-LCD

Size 7inch

Interface Digital TTL

Resolution 800×(RGB)×480

View Angle (LR/UD ) 140 / 110

Contrast Ratio 500:1

Brightness(nits) 400

Response Time(ms) 25

Video Image Compr ession MPEG-4

Recording Audio

Recorder Storage SD card(256M-32G)

Video storage format ASF

Application Power Supply

Speaker 16Ω/1W

Connector DVI24+ 1

Operating temperature -20℃ ～+ 70℃

Storage temperature -30℃ ～+ 80℃

MONITOR TECHNICAL PARAMETERS

External dimension (mm)

PCM

1.AC power supply- AC Adapter(DC11-32V)

2. (12V/24V) Automobile adapterAutomobile storage battery

185mm*123mm*50mm

）

Accessaries

U-support bracket & sc rews

10

Remote

Rear View Safety

Split cable

Remote Control Operation

REMOTE CONTROL OPERATION

Note: Make sure polarity is not reversed when installing CR2025 (3V) battery. This
may cause damage.

Reverse With Condence ™

11

Monitor OSD Menu Operation

Pressing the "MENU" button will display MONITOR/DVR. Select an option
by pressing the "OK" button. These are the monitor options.

1. Picture:

The Brightness/Contrast/Saturation may be adjusted from 0 - 100. The

MONITOR OSD MENU OPERATION

default is 50.

Hue may be adjusted from -5 - 5. The default is 0.

12

Rear View Safety

2. Channel Reverse Setting:

MONITOR OSD MENU OPERATION

Use this setting to toggle between normal and mirror views.
Press to toggle the image view.

Reverse With Condence ™

13

3. Channel Switch:

There are 9 display modes: single image (F, B, L, R), dual image (F/B,
L/R), triplex image (B/L/R) and quad (F/B/L/R, "H" shaped)

Use the channel switch to turn the 6 menu modes ON/OFF.

Single image (B,F) and dual image (F/B) modes are always on.

MONITOR OSD MENU OPERATION

14

Rear View Safety

4. Trigger Setting:

MONITOR OSD MENU OPERATION

Each trigger cable can be set to trigger any display mode.

Trigger function isn’t available if there is "X" near the option.

Note: Options cannot be changed while the system is triggered

Reverse With Condence ™

15

5. Reverse Priority Setting:

A

Tri g

A

BC

BC

Trig Priority 1

Trig Priority 2

Trig Priority 3

Trig Priority 4

T1

T2

T3

T4

B

L

R

F

Use this setting to change your trigger priority. Reverse priority isn’t
permitted if there is "X" near the option.

MONITOR OSD MENU OPERATION

16

Rear View Safety

5.Trigger Delay Setting:

A

Tri g

BC

T1

T2

T3

T4

B

L

R

F

0s

0s

0s

0s

You may change how long a monitor stays in the view after a trigger is
stopped. The options are 0 secs / 5 secs / 10 secs / 15 secs / 20 secs / 25
secs / 30 secs. The default is 0 secs.

MONITOR MENU OPERATION

Note: If the display mode is turned o, this setting will not work.
Options cannot be changed while the system is triggered.

Reverse With Condence ™

17

7. System Setting:

Tri g

A

BC

Auto Bright

Distance indicator

ON

Trig

Auto Bright

Screen brightness automatically adjusts depending on ambient light.
Select ON/OFF

Distance Indicator

ON: Distance indicator line will always appear in the single channel im­age (B/L/R/F)

OPERATION

TRIG: Only show when the single channel (B/L/R/F) is triggered
OFF: No distance indicator line

Note: The distance indicator works only when there is a video signal
input, it doesn’t work if there is no signal or if system is in multi-image
display mode.

18

Rear View Safety

5. Reverse Priority Setting:

A

Tri g

BC

LANGUAGE

ENGLISH

Languages options are English/Chinese/French/German. English is the
default language

Reverse With Condence ™

RECORD

19

DVR OSD Menu Operation

M
D
C

MONITOR DVR

Pressing the "MENU" button will display MONITOR/DVR as shown
above. Select an option by pressing the "OK" button. These are the
DVR options.

DVR OSD MENU OPERATION

20

Rear View Safety

1. DVR Image Setting:

Image

DVR OSD MENU OPERATION

OK:√

After selecting icon, press the "OK" button to enter menu.

Video Quality: High / Mid / Low

Frame Rate: 30 FPS / 15 FPS / 5 FPS

Resolution: D1/720X480, VGA/640X480, QUGA/320X240

Reverse With Condence ™

21

2. DVR REC Setting:

REC Setting

OK:√

DISPLAY

After selecting the icon, press the "OK" button to enter menu.

Scheduled Recording: Schedule specic time to record.

Overwrite Footage: Allow footage to be overwritten.
Select YES / NO.

Clip Length: Length of individual recording clip.
Select 15 min / 30 min / 60 min.

Motion Detection: Mask area/sensitivity options
Mask area: Change area of motion detection
Sensitivity Options: High / Mid / Low

22

Rear View Safety

3. DVR REC Mode

REC Setting

OK:√

After selecting the icon, press the "OK" button to enter menu.

Manual Mode: Record manually

Schedule Mode: Record automatically at an
adjustable predetermined time

Motion Detection Mode: Automatically starts recording video
when motion is detected in predetermined area

DISPLAY

Note: Pressing the "MENU" button returns to the previous menu

Reverse With Condence ™

23

4. DVR Playback

REC Setting

OK:√

DISPLAY

After selecting the icon, press the "OK" button to enter menu.
Use this setting to playback or delete video les.

24

Rear View Safety

5. DVR System Setting

REC Setting

OK:√

After selecting the icon, press the "OK" button to enter menu.

Language: Choose between English and Chinese

Time: Set time on DVR

Format: Format SD card/clear les

Card Info: View SD card storage capacity

STORAGE

Note: Save by pressing "OK" button

Reverse With Condence ™

25

System Tips

!

Insert SD Card!

If the above image is displayed, the SD card is broken or not in the
system. Please insert SD card to use the system.

SYSTEM

26

Rear View Safety

Camera Dimensions

CAMERA DIMENSIONS

• 18 Infra-red illuminators (enable you to see in total darkness)

• 1/4 Sharp® Color CCD, 250k pixels

• 2.1 mm wide lens with 130° viewing angle

• 20G vibration and 100G shock rating

• Built-in high gain microphone

Reverse With Condence ™

27

Camera Specications

sensor 1/4” Sharp® Color CCD
Picture Elements 250,000 pixels
Gamma Correction r=0.45 to 1.0
Image Sensor 600 TV lines, PAL: 500 (H) x 582 (V)
NTSC: 510 (H) x 492 (V)
Lens 2.1mm
View Angle 130°
Waterproof Rating IP69k
Sync System Internal Synchronization
Infra-red distance 50 Feet (18 Infrared)
Usable Illumination 0 Lux (IR On)
Power Source DC 12V-24V (+/- 10%)
S/N Ratio More than 48dB
Electronic Iris 1/50, 160-1/100,000sec
Video Output 1Vp - p, 75 
IR Switch Control ACDS Automatic Control
Vibration and Shock Rating 20G / 100G
Operating Temperature -40°C ~ +80°C / RH 95% Max
Storage Temperature -40°C ~ +60°C / RH 95% Max
Net Weight 22oz

CAMERA SPECIFICATIONS

TROUBLE
SHOOTING

28

Rear View Safety

Troubleshooting Troubleshooting

e

Not enough power, please install a new battery, make sure

Phenomena Possible Causes

No Indicator Light/

No indicator light/
No picture

Picture

Dark Picture

Dark picture

No sound

No Sound

No Color

No color

No car-backing

No Backing Video

function

Can’t record

Will Not Record

Improper connection with automobile adapter. Use of

System is o. Improper adapter connection. Problem with power source.

unauthorized power supply. Power switch is on OFF
position.

Brightness/contrast adjusted incorrectly.

Whether brightness and contrast adjust correctly; whether
environment temperature too low.

Whether sound volume is turned off ,or till minimum,or ther

Volume is o, or at a low level.

is a plug into AV output jack .

Color is improperly adjusted.

Whether color is well-adjusted, or whether the correct color
system(this monitor only support PAL/NTSC)

Incorrect color system (monitor only supports PAL/NTSC)

Reverse cable is not connected well.Please check the

Reverse cable is not connected well. Check the brown/blue reverse cable.

brown/blue reverse cable.

No SD card or SD card isn’t formatted.Re-insert SD card,

No SD card or SD card isn't formatted. Re-insert or reformat SD card.

or reformat the SD card.

Not enough power. Install a new CR2025 (3V) battery.

it’s the same battery model

Improper battery installation, reinstall battery.

Improper battery installment, please install battery again.

CR2025,3V。

Remote won't work

Remote can’t work

Remote isn't pointed at infrared receiver

Remote don’t align infrared receiver.

Remote is too far away from monitor.

Remote is far away from monitor.

Obstacles are blocking remote control path.

Obstacle influences remote control path.

Reverse With Condence ™

29

ONE YEAR WARRANTY

REAR VIEW SAFETY, INC. WARRANTS THIS PRODUCT AGAINST MATERIAL DEFECTS FOR A
PERIOD OF ONE YEAR FROM DATE OF PURCHASE. WE RESERVE THE RIGHT TO REPAIR OR
REPLACE ANY SUCH DEFECTIVE UNIT AT OUR SOLE DISCRETION. REAR VIEW SAFETY, INC.
IS NOT RESPONSIBLE FOR A DEFECT IN THE SYSTEM AS A RESULT OF MISUSE, IMPROPER
INSTALLATION, DAMAGE OR MISHANDLING OF THE ELECTRONIC COMPONENTS. REAR VIEW

SAFETY, INC. IS NOT RESPONSIBLE FOR CONSEQUENTIAL DAMAGES OF ANY KIND.

THIS WARRANTY IS VOID IF: DEFECTS IN MATERIALS OR WORKMANSHIP OR DAMAGES

RESULT FROM REPAIRS OR ALTERATIONS WHICH HAVE BEEN MADE OR ATTEMPTED BY
OTHERS OR THE UNAUTHORIZED USE OF NONCONFORMING PARTS; THE DAMAGE IS DUE
TO NORMAL WEAR AND TEAR, THIS DAMAGE IS DUE TO ABUSE, IMPROPER MAINTENANCE,
NEGLECT OR ACCIDENT; OR THE DAMAGE IS DUE TO USE OF THE REAR VIEW SAFETY, INC.

SYSTEM AFTER PARTIAL FAILURE OR USE WITH IMPROPER ACCESSORIES.

WARRANTY

WARRANTY PERFORMANCE

DURING THE ABOVE WARRANTY PERIOD, SHOULD YOUR REAR VIEW SAFETY PRODUCT
EXHIBIT A DEFECT IN MATERIAL OR WORKMANSHIP, SUCH DEFECT WILL BE REPAIRED WHEN
THE COMPLETE REAR VIEW SAFETY, INC. PRODUCT IS RETURNED, POSTAGE PREPAID AND

INSURED, TO REAR VIEW SAFETY, INC. OTHER THAN THE POSTAGE AND INSURANCE

REQUIREMENT, NO CHARGE WILL BE MADE FOR REPAIRS COVERED BY THIS WARRANTY.

WARRANTY DISCLAIMERS

NO WARRANTY, ORAL OR WRITTEN, EXPRESSED OR IMPLIED, OTHER THE ABOVE WARRANTY
IS MADE WITH REGARD TO THIS REAR VIEW SAFETY, INC. REAR VIEW SAFETY, INC. DISCLAIMS
ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR

PURPOSE AND ALL OTHER WARRANTIES IN NO EVENT SHALL REAR VIEW SAFETY. INC.

LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES OR FOR

ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A

CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING,

BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS.

30

Rear View Safety

DISCLAIMER

REAR VIEW SAFETY AND/OR ITS AFFILIATES DOES NOT GUARANTEE OR PROMISE THAT THE
USER OF OUR SYSTEMS WILL NOT BE IN/PART OF AN ACCIDENT OR OTHERWISE NOT COLLIDE
WITH AN OBJECT AND/OR PERSON. OUR SYSTEMS ARE NOT A SUBSTITUTE FOR CAREFUL
AND CAUTIOUS DRIVING OR FOR THE CONSISTENT ADHERENCE TO ALL APPLICABLE TRAFFIC
LAWS AND MOTOR VEHICLE SAFETY REGULATIONS. THE REAR VIEW SAFETY PRODUCTS ARE

NOT A SUBSTITUTE FOR REARVIEW MIRRORS OR FOR ANY OTHER MOTOR VEHICLE
EQUIPMENT MANDATED BY LAW. OUR CAMERA SYSTEMS HAVE A LIMITED FIELD OF VISION
AND DO NOT PROVIDE A COMPREHENSIVE VIEW OF THE REAR OR SIDE AREA OF THE VEHICLE.
ALWAYS MAKE SURE TO LOOK AROUND YOUR VEHICLE AND USE YOUR MIRRORS TO CONFIRM

REARWARD CLEARANCE AND THAT YOUR VEHICLE CAN MANEUVER SAFELY. REAR VIEW

SAFETY AND/OR ITS AFFILIATES SHALL HAVE NO RESPONSIBILITY OR LIABILITY
FOR DAMAGE AND/OR INJURY RESULTING FROM ACCIDENTS OCCURRING WITH VEHICLES
HAVING SOME OF REAR VIEW SAFETY PRODUCTS INSTALLED AND REAR VIEW SAFETY AND/
OR ITS AFFILIATES, THE MANUFACTURER, DISTRIBUTOR AND SELLER SHALL NOT BE LIABLE
FOR ANY INJURY, LOSS OR DAMAGE, INCIDENTAL OR CONSEQUENTIAL, ARISING OUT OF THE
USE OR INTENDED USE OF THE PRODUCT. IN NO EVENT SHALL REAR VIEW SAFETY AND/OR
ITS AFFILIATES HAVE ANY LIABILITY FOR ANY LOSSES WHETHER DIRECT OR INDIRECT, IN

CONTRACT, TORT OR OTHERWISE INCURRED IN CONNECTION WITH THE SYSTEMS,

INCLUDING BUT NOT LIMITED TO DAMAGED PROPERTY, PERSONAL INJURY AND/OR LOSS OF

LIFE. NEITHER SHALL REAR VIEW SAFETY AND/OR ITS AFFILIATES HAVE ANY

RESPONSIBILITY FOR ANY DECISION, ACTION OR INACTION TAKEN BY ANY PERSON IN

RELIANCE ON REAR VIEW SAFETY SYSTEMS, OR FOR ANY DELAYS, INACCURACIES AND/OR

ERRORS IN CONNECTION WITH OUR SYSTEMS FUNCTIONS.

DISCLAIMER

Reverse With Condence ™

31

If you have any questions

about this product, contact:

Rear View Safety, Inc.

1797 Atlantic Avenue

Brooklyn, NY 11233

800.764.1028

Better Cameras. Better Service.

IT’S OUR GUARANTEE.

32

Rear View Safety