RealWear HMT-1 Installation Instructions Manual

Bump Cap Strap Installation Instructions

for the RealWear HMT-1

August 2017

Overview

These instructions cover the installation of a prototype head strap for the HMT-1 which is
optimized for use with a bump cap.

At this time (August 2017), RealWear has not released the bump cap mounting solution to its
customer base. Your use of the prototype hardware is for information purposes only. We are
pleased that you are considering the use of the HMT-1 and hope that you find this accessory
also potentially useful. We look forward to hearing from you about your experiences with it.

Materials

1. HMT-1

2. Bump cap

3. T-Strap with Bump Cap Mounting Hooks

4. Chin Strap

Instructions

1. Determine the side the device will
be worn on. The photos
accompanying these instructions
show a right-eye configuration

2. Remove the back head strap and
the overhead strap.

HMT-1Release Notes for Pioneer Members

1 | Page