Really Right Stuff TQC-14, MC-14, TVC-23, TFC-14, TVC-24L User Manual

TRIPOD & MONOPOD MANUAL

100% MADE
IN THE USA

2

WELCOME

Thank you for purchasing a Reay Right Stu tripod or monopod Many years

ago we set out to create tripods that woud exempify the best in crasmanship
and quaity We are proud to present to you the resuts of that pursuit Our
‘pods are the cumination of first-hand experience and abundant input from
seasoned professionas Buiding upon our reputation of high precision CNC
manufacturing we enisted unsurpassed composite manufacturing taent to
bring you what we fee is a carbon fiber masterpiece We sincerey hope you
take a moment to appreciate this beautifu piece of equipment and review
this manua to see how you can get the most from your tripod If you have any
questions or comments pease contact us. We ove hearing your feedback

Thanks again and enjoy



Joe Johnson

Really Right Stu

1146 Farmhouse Lane
San Luis Obispo, California 93401-8362 USA

Phone: [phone] or toll-free 1-888-777-5557 in the US and Canada

Fax: [phone]

Email: info@reallyrightstu.com

Web: www.ReallyRightStu.com

Guarantee: All Really Right Stu brand products are guaranteed to the original

purchaser to be free of defects in materials or workmanship for five (5) years from the
date of purchase.

Protected by US Patents: RRS tripods have been granted patents by the United States

Patent and Trademark Oice. Any party that manufactures, imports, uses, sells, or
oers for sale the patented technology without permission/license from Really Right
Stu, LLC, during the term of the patent and within the country that issued the patent,
is considered to infringe the patent.

® ™ © 1990-2017 Really Right Stuff, LLC. All rights reserved.

3

3

www.ReallyRightStu.com

SERIES AND MODELS

TVC-34L

Our tripods & monopods vary in height, weight, load capacity, and features.
‘Pods within the same Series share a common load capacity. See our website for
detailed specifications.

RRS ‘Pod Models

Understanding ‘Pod Names

Tripod or Monopod

Apex (

Versa, Quick-Column, Fixed)

Carbon Fiber

‘Pod Series

Number of leg sections per leg

Long,

S

hort, or

G

round Level

Series 1

TQC-14 Tripod, Quick-Column, 4 leg sections per leg 25 lb / 11.3kg 2.6 lb / 1.2kg
TFC-14 Tripod, Fixed Apex, 4 leg sections per leg 25 lb / 11.3kg 2.3 lb / 1.1kg
MC-14 Monopod, 4 leg sections 25 lb / 11.3kg 1.0 lb / 0.4kg

Series 4

TVC-42G Tripod, Versa-style Apex, 2 leg sections per leg, Ground 100 lb / 45kg 4.1 lb / 1.8kg
TVC-43 Tripod, Versa-style Apex, 3 leg sections per leg 100 lb / 45kg 6.0 lb / 2.7kg
TVC-44 Tripod, Versa-style Apex, 4 leg sections per leg, Short 100 lb / 45kg 6.5 lb / 3.0kg
TVC-45 Tripod, Versa-style Apex, 5 leg sections per leg 100 lb / 45kg 6.9 lb / 3.1kg
MC-45 Monopod, 5 leg sections 100 lb / 45kg 2.0 lb / 0.9kg

Series 3

TVC-32G Tripod, Versa-style Apex, 2 leg sections per leg, Ground 50 lb / 23kg 2.5 lb / 1.1kg
TVC-33 Tripod, Versa-style Apex, 3 leg sections per leg 50 lb / 23kg 4.3 lb / 1.9kg
TVC-33S Tripod, Versa-style Apex, 3 leg sections per leg, Short 50 lb / 23kg 4.1 lb / 1.8kg
TVC-34 Tripod, Versa-style Apex, 4 leg sections per leg 50 lb / 23kg 4.4 lb / 2.0kg
TVC-34L Tripod, Versa-style Apex, 4 leg sections per leg, Long 50 lb / 23kg 4.7 lb / 2.1kg
MC-34 Monopod, 4 leg sections 50 lb / 23kg 1.5 lb / 0.7kg

Series 2

TVC-23 Tripod, Versa-style Apex, 3 leg sections per leg 40 lb / 18kg 3.3 lb / 1.5kg
TVC-24 Tripod, Versa-style Apex, 4 leg sections per leg 40 lb / 18kg 3.3 lb / 1.5kg
TVC-24L Tripod, Versa-style Apex, 4 leg sections per leg, Long 40 lb / 18kg 3.7 lb / 1.7kg
MC-25 Monopod, 5 leg sections 40 lb / 18kg 1.3 lb / 0.6kg

4

FEATURES AT-A-GLANCE

1. Mounting Stud

3

⁄8” Mounting Stud securely attaches to

tripod heads.

2. Spirit Level

The bullseye helps you level your tripod
with ease (Versa tripods only).

3. Angle Stop

The Angle Stop ratchets into place to set
leg angle.

4. SureGrip™ Apex Lock

Carry your tripod over your shoulder
with confidence. The SureGrip™ Apex
Lock securely fastens your tripod
accessory (Versa tripods only).

5. Versa Quick-Column

Optional Quick-Column can be
purchased separately.

6. Quick-Column

Quick-Column Tripods come with
integrated column; column locks with
ergonomic Butterfly Knob.

7. Oset Leg Joint

Oset Leg Joints help decrease the
circumference of your tripod when
folded up for travel.

8. Leg

Ultra thin wall, large diameter carbon
fiber tubes provide superior strength
and extraordinary vibration absorption
without adding weight.

9. Weight Hook

Can be used with a carabiner 1⁄4” to 3⁄8”
diameter.

10. Twist Lock

Extra large twist locks made with rubber
over-molded aluminum provide a
comfortable grip and easy rotation.

11. Interchangeable Foot

Unique tapered shape assures maximum
stability and prevents legs from touching
the ground even at full spread.

Our tripods and monopods are made with carbon fiber, hard anodized
6061‑T6 aluminum, and stainless steel. 100% made in the U.S.A.

5

5

www.ReallyRightStu.com

BASIC TRIPOD USE

2

3 4

1

The tripod can be arranged in a variety of positions to accommodate nearly every ter­rain. Remove column from Quick-Column tripods for ground set; see page 7.

Before taking your tripod afield, take a moment to familiarize yourself with
its operations.

1. Swing out all three legs.

2. Grab all Twist Locks with one
hand and rotate one quarter
turn.

3. Pull leg until fully extended.

4. Tighten Twist Locks.

5. Repeat on all legs.

6. To collapse, loosen twist locks
and collapse leg. Grab all Twist
Locks with one hand and
tighten.

All tripod and monopod feet are loose.
This gives you the option of swapping
the stock feet for Rock Claws or Foot
Spikes (see page 11). Once you have
chosen feet to your liking, use one drop
of threadlocker fluid to secure feet
(included with your tripod).

6

SETTING LEG ANGLES

4

3

1. Swing leg inward slightly.

2. Slide Angle Stop out
completely. (Slide back in at
any time to cancel.)

3. Swing leg to horizontal
position. Angle Stop will
engage.

4. Move to desired position.
Angle Stop will ratchet
automatically.

1

2

For low‑level settings, use the ratcheting Angle Stop as shown below.

7

7

www.ReallyRightStu.com

4

2

QUICK-COLUMN TRIPODS

1. Tighten Butterfly Knob, then
use ⅛” hex key (included) to
loosen Platform set screw(s)
(do not remove).

2. Unscrew and remove Platform
and Weight Hook.

3. Rotate Butterfly Knob
counterclockwise no more
than two complete turns (do
not remove), then slide Quick­Column up and out.

4. Place Platform atop Apex
and thread Weight Hook onto
the stud on the bottom of the
Platform. Screw the two pieces
firmly together; platform and
hook assembly will seat loosely
in the Apex.

5. Simultaneously hold Platform
in place and turn Butterfly
Knob counter-clockwise until
Platform and Weight Hook
assembly are secure.

6. Tighten Platform set screw(s).

7. Reverse steps to reinstall Quick­Column. When sliding column
through Apex, align groove
in column with anti-twist tab
inside Apex.

Quick‑Column Tripods come with integrated Quick‑Column. Column is
removable for ground set; follow steps below.

1

1

2

3

5

4

8

3

REVERSE THE STUD

The threaded platform stud on the TFC‑14 is dual‑threaded ¼”‑20 and 3⁄8”‑16

and is reversible. Follow the steps to reverse the stud from 3⁄8”‑16 to ¼”‑20.

1

2

1. Use 5/32” hex key to unscrew
and remove the Stud.

2. The Strap & Strap Pin must be
removed before the Stud can
be re-installed. Use 5/32” hex
key to unscrew and remove the
Strap Pin.

3. Turn the tripod upside down.
Use 5/32” hex key to re-install
the Stud by screwing it into the
bottom of the apex.

4. Re-install the Strap & Strap Pin
(not shown).

The Stud is not secured with
threadlocker fluid at the
factory. This allows you to
easily reverse it if needed. To
semi-permanently secure the
Stud in place, use one drop of
threadlocker fluid (included
with your tripod) on the Stud.

9

9

www.ReallyRightStu.com

ADJUST THE SET SCREW

1. Swing leg closest to Set Screw
inward slightly.

2. Pull Angle Stop out until
it stops, then swing leg
completely out.

3. Insert 2.5mm hex key into Set
Screw, then turn clockwise to
tighten it against the bottom of
your tripod head.

The TFC‑14 platform comes with one Set Screw that can be used to prevent

your tripod head from coming loose. For clarity, drawings do not show the

tripod head installed to the tripod. Install your tripod head, then follow steps.

1

2

Set
Screw

Note that if you tighten the Set
Screw it will almost certainly
mar the bottom of your tripod
head. To semi-permanently
install your tripod head and
avoid any blemish marks use
one drop of threadlocker fluid
on the Stud (included with
your tripod) when you install
your head.

3

10

MAINTENANCE

Regular maintenance of your tripod is highly recommended to keep its
performance and appearance in top shape. Your tripod is built to last
through years of use with proper maintenance and care. Protect your
investment by following this guide to good maintenance practices.

» Check SureGrip™ set screws for

proper tightness to ensure the Apex
accessory is secure. Use 1⁄8” hex key
to make adjustments as necessary.

» When exposing your tripod to mud or

saltwater, use a damp towel to wipe
down and dry the legs completely
before collapsing. Then, disassemble
and clean tripod per instructions on

page 9.

» Leg bolts should be tight enough

to prevent legs from collapsing, but
loose enough to open with ease. Use 3⁄16” hex key to make adjustments as
necessary.

» Periodically apply multi-purpose lubricant to the threads of each leg joint.

However, never lubricate the carbon fiber legs.

» Check for metal corrosion. Contact Really Right Stu for any necessary

replacement parts.

» Always keep your tripod in a protective bag when transporting or storing.

» Always fully extend the lower leg section during use in sand or mud to

prevent contaminating leg joints.

See online maintenance videos: vimeo.com/album/2907595

SAND AND SALTWATER ARE YOUR

TRIPOD’S WORST ENVIRONMENTAL

ENEMIES. ALWAYS DISASSEMBLE AND

CLEAN TRIPOD AFTER EXPOSURE.

11

11

www.ReallyRightStu.com

CLEANING

Avoiding harsh environments such as sand and saltwater is essential to
preserving the life of your tripod. However, we do understand that sometimes
it is unavoidable. Therefore, we have made it simple to disassemble the leg
portions for thorough cleaning.

1. Unscrew Twist Lock and fully
remove leg section.

2. Remove Twist Lock, foot, and
Anti-Twist Sleeves.

3. Wipe down leg, foot, and ex­posed threads with damp cloth,
removing any dirt or debris.
Allow to dry.

4. Apply a small amount of multi­purpose grease to the exposed
leg threads.

5. Replace Anti-Twist Sleeves and
Twist Lock.

6. Holding Anti-Twist Sleeves
in place, insert leg into tripod
where the arrow meets with
gap between the Anti-Twist
Sleeves. Slide leg in completely.

7. Screw Twist Lock and foot back
into position. Rotate Twist Lock
back and forth to spread grease.

1a

2

1b 1c

6

See step-by-step tutorial: blog.reallyrightstu.com/cleaning-tripod-legs/

12

NEW FOR 2017!

Look no further for the most clever shoulder strap system for your RRS
tripod*. This new system incorporates QD “Quick‑Detach” mounting
hardware and allows the strap to be quickly and easily removed at any time.
The system has two parts:

Side View

All 3 tripod legs stay together when
Leg QD Mount is installed correctly.

Two QD Mounts

Apex QD Mount + Leg QD Mount

Leg QD Mounts come in 3 sizes for

RRS Series 1, 2, and 3 tubes.

Leg QD Mount

Use included hex key and screws to
install Leg QD Mount to the bottom of
the first leg section. Install so that the QD
socket is facing in, not out. When carrying
the tripod, this leg will face the ground
and the strap will feed up between the
other two legs. The tripod legs will
remain folded together without
the need to tie them.

QD-Compatible Strap

Strap must have two QD sling swivels.

Purchase strap with pre-installed QD

swivels, or buy QD swivels separately and

use with your own strap.

Apex QD Mounts are compatible only with mid-2016 and newer Series 2/3/4 tripods.
Series 1 Apex QD Mount is compatible only with the TFC-14 (not compatible with TQC-14).
For other models, do not use Apex QD Mount; instead, install two Leg QD Mounts.

*

13

13

www.ReallyRightStu.com

QD STRAP SYSTEM

For Series 2/3/4

Install Apex QD Mount

to underside of apex

with two screws.

Apex QD Mount

For TFC-14

Install Apex QD
Mount into
threaded
socket on
side of
apex.

14

CHANGING APEX ACCESSORIES

Apex Accessories are only available for Versa Tripods. Your tripod head must
first be removed from the Mounting Stud.

1. Use 1⁄8” hex key to loosen all
three SureGrip™ set screws
around Apex. Two rotations
are suicient, complete
removal is not required.

2. Remove Apex platform or
other accessory by pushing it
upward.

3. Insert compatible accessory.
NOTE: Although Gitzo®

Systematic accessories will fit
Versa Series 3 tripods, SureGrip™
functionality is only compatible
with Really Right Stu brand
accessories.

4. Tighten all three SureGrip™ set
screws.

2

1

4

3

15

15

www.ReallyRightStu.com

Tripod & Monopod Accessories to fill all your photography needs.

Replacement Feet

Great for tripods & monopods.

MTX Multi-Tool

The best tool for your tripod.

Versa Quick Columns

With integrated SureGrip™

Leveling Bases

Choose Platform or Clamp

A leveling base on your tripod is the perfect foundation for gimbal heads, pano
gear, and even ballheads. Each leveling base oers ±15° of leveling capability
and locks solidly. Choose a leveling base with a flat platform for direct mounting
of a tripod head. Or choose a leveling base with a clamp if you want quick­change convenience for multiple tripod heads on the same tripod.

‘POD ACCESSORIES

TA-3-FRC
Rock Claws for
rocky terrain.

TA-U-LB

TA-3-LB

TA-3-LC

TA-3-LB-HK

TA-3-LC-HK

TA-4-LB-HK

TA-U-LC TA-2-LB TA-2-LC

TA-3-FS
Foot Spikes for
shiing terrain.

TA-3-QC

for Versa Series 3

TA-2-QC

for Versa Series 2

Universal Series 2

Series 3 Series 4

16

www.ReallyRightStu.com