Golden Oak Designer Plus (RDP) Log Placement Instructions (12" model)
RDP-12
PARTS LIST
II
3
BRD-1R
5
RDL-8TL
1
RDL-12BF
2
RDL-12BF
6
4
BRD-1L
RDL-8TR
CAUTION: Burn hazard! Logs will remain hot
for some time after use.
I
1
III
3 4
IV
2
Final Log Placement
6
V
5
1
L-A2-316REV 1 - 1201241135
Golden Oak Designer Plus (RDP) Log Placement Instructions (16" & 19" models)
RDP-16 and RDP-19
PARTS LIST
5
RDL-7T
4
3
RDL-10T
1
RDL-12BR
6
RDL-11TR
16" - RDL-16BF
2
19" - RDL-19BF
CAUTION: Burn hazard! Logs will remain hot
for some time after use.
RDL-8TY
I
1
II
19" log set shown
III
4
3
2
Final Log Placement
IV
5
6
REV 1 - 1201241135
2
L-A2-316
Golden Oak Designer Plus (RDP) Log Placement Instructions (18" & 20" models)
RDP-18 and RDP-20
PARTS LIST
5
RDL-8TR
6
4
3
RDL-15TC
1
18" log set shown
RDL-8TL
RDL-13TY
RDL-15-BR
18" - RDL-18BF
2
20" - RDL-20BF
CAUTION: Burn hazard! Logs will remain hot
for some time after use.
I
1
II
IV
3
III
4
2
Final Log Placement
6
V
5
3
L-A2-316REV 1 - 1201241135
Golden Oak Designer Plus (RDP) Log Placement Instructions (24" & 30" models)
RDP-24 and RDP-30
PARTS LIST
6
EDL-10T
5
RDL-9TL
3
RDL-15TC
24" log set shown
7
1
RDL-9TR
4
RDL-13TY
24" - RDL-20BR
30" - RDL-24BR
2
24" - RDL-24BF
30" - RDL-30BF
CAUTION: Burn hazard! Logs will remain hot
for some time after use.
I
1
II
IV
III
3
4
2
Final Log Placement
V
6
5
7
REV 1 - 1201241135
L-A2-316
-
4
-
Golden Oak Designer Plus (RDP) Log Placement Instructions (36" model)
5
RDL-9TR
RDP-36
PARTS LIST
6
4
RDL-15TL
3
RDL-20T
RDL-9TL
7
RDL-15TR
1
RDL-30BR
2
RDP-36BF
CAUTION: Burn hazard! Logs will remain hot
for some time after use.
I
1
II
IV
III
3
2
Final Log Placement
V
4
5
6
7
5
L-A2-316REV 1 - 1201241135
Golden Oak Designer Plus (RDP) Log Placement Instructions (42" model)
6
RDL-15TR
4
RDP-42
PARTS LIST
RDL-18TR
3
RDL-24T
7
RL-15TL
5
1
RDP-36BR
2
CAUTION: Burn hazard! Logs will remain hot
for some time after use.
I
RDL-18TL
1
RDP-42B
II
IV
III
3
2
Final Log Placement
V
4
5
6
7
REV 1 - 1201241135
- 1201241135
L-A2-316
6
-A2-3
Golden Oak Designer Plus (RDP) Log Placement Instructions (48", 54", & 60" models)
RDP-48, RDP-54, and RDP-60
PARTS LIST
6
4
RDL-24T
RDL-18TR
7
3
RDL-30T
1
RDL-18TL
5
RDL-24T
48" - RDP-42B
54" - RDP-48B
60" - RDP-54B
2
48" - RDP-48B
54" - RDP-54B
60" - RDP-60B
CAUTION: Burn hazard! Logs will remain
hot for some time after use.
I
1
II
IV
54" log set shown
III
3
2
V
Final Log Placement
- 1201241135
4
5
7
6
7
L-A2-316REV 1 - 1201241135
-A2-316
LOG SET IMPORTANT INFORMATION
This instruction contains suggested log placement for your Real-Fyre log set. The suggested log placement
will allow for superior fl ame pattern, appearance, and adequate ventilation. Adequate ventilation is
absolutely necessary! Provided signifi cant, noticeable sooting does not occur, some fl exibility is possible
in log placement to suit your individual preference (see Important below). If you experience a continued
accumulation of carbon (soot) on your logs, move the effected log(s) so as to minimize the fl ame contact
on the effected log(s). Please read these instructions completely and carefully.
Important: Adequate ventilation is absolutely
necessary. Although there is some
flexibility with the log placement,
adequate spacing between the
logs is NECESSARY and MUST be
maintained. Some carbon build up
(sooting) may occur where the fl ames
strike the logs. If the carbon build up
(sooting) continues, rearrange the
top logs to allow more opening(s) for
the fl ame(s) before sooting becomes
worse. If any sooting occurs outside
of the fi rebox (i.e. on the walls), turn
off the unit immediately and contact
a qualified professional service
technician.
WARNING: Use ONLY burners and other parts
specifi cally approved for use with this
Real-Fyre gas log set. Failure to do
so may result in property damage or
personal injury, and will void listings,
certifi cations, and negate claims made
to RHP. Contact your local Real-Fyre
dealer if you need more information.
CAUTION: Burn hazard! Logs will remain hot
for some time after use. If you need to
reposition any log to maintain the proper
layout, use heat resistant gloves or allow
logs adequate time to cool before handling.
For warranty information refer to the warranty that
came with your vented burner system. This product
is only warranted when used as part of a Robert
H. Peterson Co. vented burner system.
ROBERT H. PETERSON CO. • 14724 East Proctor Avenue • City of Industry, CA 91746
8
Loading...