![](/html/fb/fb2a/fb2a6c3f1b7ca472a78d3ad4b1730746e549feaf494d730b9beffe3e76ac44e0/bg1.png)
Lot:___________
gel replaces and accessories
Mantle Assembly Instructions
Model # 3150
Camden Fireplace
3150-Camden-JW-081511
![](/html/fb/fb2a/fb2a6c3f1b7ca472a78d3ad4b1730746e549feaf494d730b9beffe3e76ac44e0/bg2.png)
Helpful Tips for Assembly
Before assembly carefully unpack and check for each replace piece and necessary hardware
IF ANY PARTS ARE DAMAGED OR MISSING PLEASE CALL US DIRECTLY AT:
1-800-654-1704
Prep, plan and clear your space. In order to minimize damage while assembling make sure unpacking and
assembly takes place on a carpeted surface.
We recommend to use a power screwdriver for assembly it will greatly reduce your time for assembly. BE SURE
NOT TO OVERTIGHTEN SCREWS. The wood can easily be stripped out if too much force is used.
Use two people for assembly of the mantle. Another set of hands will help tremendously with the assembly
process and will reduce the amount of time spent on assembly. If you do not have a helper, that is ok too, just
take your time and follow the instructions.
Make sure that your mantle has been properly assembled prior to use. Once you have completed assembly
you should not have any extra mantle parts. The piece will be quite sturdy and all pieces will t together
nicely. If you did not achieve ideal results by following the instructions, please contact our customer service
team at 1-800-654-1704 and they will help answer any questions or concerns about the assembly process.
Care and Cleaning
Dust the mantel periodically as you would with any piece of furniture.
Using a soft cloth and a wood cleaner, wipe the mantel clean in the direction of the grain to minimize the
appearance of scratches and scus in the nish.
Do not use water to clean mantel. Water may cause swelling, warping or stains if allowed to penetrate the
nish of the mantel. Use protective pads or cloths whenever possible.
Avoid placing mantel in rooms with lots of humidity or where humidity could be a problem. This may cause
warping to the mantel.
Avoid direct sunlight if possible to reduce the possibility of fading the nish.
Using your Fireplace
Fireplace is designed to be used indoors, there is no need for ventilation.
Use extreme caution while burning. Some surfaces become extremely hot during use.
Before using replace, be sure you have read and understand the step-by-step instructions and warnings
included with your Gel fuel or electric rebox.
2
![](/html/fb/fb2a/fb2a6c3f1b7ca472a78d3ad4b1730746e549feaf494d730b9beffe3e76ac44e0/bg3.png)
PARTS LIST
10
9
8
2
4
6
7
12
11
1
14
3
5
Number Description Mahogany Light Oak Quantity
1 Base Panel 31500401 31500601 1
2 Left Side Panel 31500402 31500602 1
3 Right Side Panel 31500403 31500603 1
4 Left Front Panel 31500404 31500604 1
5 Right Front Panel 31500405 31500605 1
6 Lower Firebox Trim 31500406 31500606 1
7 Center Panel 31500407 31500607 1
8 Top Front Panel 31500408 31500608 1
9 Top Center Panel 31500409 31500609 1
10 Top Corner Panel 31500410 31500610 1
11 Firebox Support 31500011 31500011 1
12 Base Panel Support 31500012 31500012 1
13 Top Panel Support 31500013 31500013 1
14 Corner Mantel Support 31500014 31500014 1
15 Hardware Kit 31500015 31500015 1
13
A x 32
Short Allen Screw
D x 19
Washer
#15 HARDWARE LIST - 31500015
B x 16
L-Bracket
E x 1
Allen Wrench
3
C x 27
Long Allen Screw
F x 2
MDF Board
![](/html/fb/fb2a/fb2a6c3f1b7ca472a78d3ad4b1730746e549feaf494d730b9beffe3e76ac44e0/bg4.png)
Step One
-Join left side panel (2) with left front panel (4) by securing 6 short allen screws through 3
L-brackets.
-Repeat with right side panel (3) and right front panel (5).
A
3
B
A
A
5
4
Step Two
-Set base panel (1) on a at surface as shown.
-Attach 6 L-brackets to base panel (1) by securing 6 short allen screws.
2
A
B
1
4
![](/html/fb/fb2a/fb2a6c3f1b7ca472a78d3ad4b1730746e549feaf494d730b9beffe3e76ac44e0/bg5.png)
Step Three
-Join panel (2) & (4), (3) & (5) with base panel (1) by securing 6 short allen screws through 6
L-brackets.
3
5
4
B
A
1
Step Four
-Attach 4 L-brackets to center panel (7) by securing 4 short allen screws.
2
B
7
A
5
![](/html/fb/fb2a/fb2a6c3f1b7ca472a78d3ad4b1730746e549feaf494d730b9beffe3e76ac44e0/bg6.png)
Step Five
-Attach center panel (7) to side panel (2) & (3) by securing 4 short allen screws through 4
L-brackets.
-Attach center panel (7) on front panel (4) & (5) by securing 4 long allen screws through 4 washers
and 2 MDF boards.
B
C
3
A
7
F
D
5
4
2
Step Six
-Attach lower rebox trim (6) to front panel (4) & (5) by securing 2 long allen screws through 2
washers.
5
4
D
6
C
6