RealFlame G1200 Mantel Assembly Instructions

Model # G1200

Fresno Fireplace

G1200-Fresno-JW

Mantel Assembly Instructions

051112

LOT#

PO#

ventless fireplaces

WARNING

!!

Read entire label and all instructions included with fireplace fuel and fireplace

PROPERTY DAMAGE, SERIOUS INJURY OR DEATH may result if these warnings are not followed

HAZARDS

-

Fireplace fuel is flammable. Failure to follow warnings can result in property damage or serious burns.

-

Do not attempt to pourany kind of fuel on a fire that is already burning. Flare-ups or flashbacks can
occur if you do. Allow unit to cool for 20 minutes before refueling or removing cans of fuel.

-

Use only Real Flame® Fireplace fuel in this unit. Do not use with any other fuel or flammable material. Do not
attempt to refill cans of fireplace fuel.

-

Do not store or use gasoline or other flammable materials, including fireplace fuel, near this product. Vapors from
these types of items may collect and increase the risk of fire, explosion or injury.

-

In case of an emergency use a CO2 extinguisher or baking soda to extinguish the fire.

Precautions

1. Never touch logs, fireplace fuel cans or any other surfaces during or immediately after burning fireplace fuel.
They will be extremely HOT. Allow surfaces to cool for 20 minutes before touching or refuelling.

2. Make sure fireplace is operated on a flat, level and stable surface. Keep fireplace stable at all times

3. WARNING: Never alter or dismantle the fireplace, metal firebox or logset in any manner.

4. Never store or use gasoline or any other flammable vapors, liquids, or materials in the vicinity of the fireplace
and fireplace fuel.

5. Burn only Real Flame® fireplace fuel in this fireplace. Never burn trash, paper, or wood in the fireplace.

5. Never leave a burning fire unattended, especially AROUND CHILDREN OR PETS.

6. Fireplace is not to be operated by anyone below age 18. Keep away from children and pets.

7. Never burn fireplace fuel outside the designated burn areas in metal firebox. Wipe up spills right away with a
paper towel or rag.

8. Do not burn more than three cans of fuel in the firebox at any one time.

9. Do not wear flammable or loose clothing when operating the fireplace.

10. Do not place more than 100 lbs. of weight on the top of the fireplace at anytime.

11. Never move fireplace while in use. Do not attempt to move fireplace until 30 minutes after
fireplace fuel has been extinguished.

12. Do not place fireplace in high traffic areas, such as a hallway or entryway.

13. Exercise the same precautions as you would with any open fire.

NOTICE: Buyer assumes all responsibility for safety and use that is not in accordance with these instructions and warnings.

-Fireplace is designed to be used indoors, there is no need for ventilation.

-Before using unit, be sure you have read and understood all of the

Using your

Fireplace

FIREPLACE

FUEL

FIRST AID

step-by-step instructions.

-After several burns, soot may develop on the inside of the firebox. Clean with
a damp soapy rag or any household glass cleaner.

-During the initial burn you may experience a slight odor. Odor is temporary
and will be absent on following burns.

FLAMMABLE Real Flame Fireplace Fuel contains isopropyl alcohol.
Avoid contact with eyes, mucous membranes or prolonged contact with skin. May
irritate eyes. Store in a cool, dry place. Keep away from flame, heat or items that
spark. Use in well-ventilated areas. Keep out of reach of children and pets. In case
of fire, use a CO2 fire extinguisher or baking soda.

If fuel gets in eyes, flush with water for 15 minutes; get medical attention. If ingested,
do not induce vomiting; call a poison control center a doctor.

If you have questions please call customer service at: 1-800-654-1704

RF Mantle WARNINGS Rev7 050812

14 Hardware Kit 12000014JW 12000014JW 12000814JW 1

13 Shelf Panel 12000113JW 12001213JW 12000813JW 4

12 Back Panel 12000112JW 12001212JW 12000812JW 2

11 Top Panel 12000111JW 12001211JW 12000811JW 1

10 Right Center Panel 12000110JW 12001210JW 12000810JW 1

9 Left Center Panel 12000109JW 12001209JW 12000809JW 1

8 Upper Firebox Trim 12000108JW 12001208JW 12000808JW 1

7 Right Inside Panel 12000107JW 12001207JW 12000807JW 1

6 Left Inside Panel 12000106JW 12001206JW 12000806JW 1

5 Right Front Panel 12000105JW 12001205JW 12000805JW 1

4 Left Front Panel 12000104JW 12001204JW 12000804JW 1

3 Right Outside Panel 12000103JW 12001203JW 12000803JW 1

2 Left Outside Panel 12000102JW 12001202JW 12000802JW 1

1 Base Panel 12000101JW 12001201JW 12000801JW 1

Number Description Black Dark Walnut White Quantity

3

PARTS LIST

A x 18
3 in 1 Bolt

B x 18
Excenter Fitting

C x 11
Long Allen Screw

D x 11
Washer

E x 1
Allen Wrench

F x24
Back Panel Screw

G x 16
Shelf Panel Support

HARDWARE KIT -12000014JW

/ 12000814JW

4

Step One

-Screw eight 3-in-1 bolts to base panel (1).

-Screw three 3-in-1 bolts to left front panel (4).

-Screw three 3-in-1 bolts to right front panel (5).

-Screw four 3-in-1 bolts to top panel (11)

Step Two

-Join left inside panel (6) with left front panel (

4) by inserting three bolts in the holes of (6). Using

three excenter ttings lock the bolts.

-Repeat with right inside panel (7) and right front

panel (5).

1

11

4

5

A

A

A A

4

5

6

7

B

5

Step Three

-Set base panel (1) on a at surface as shown.

-Join panel (2), (3), (6), (7) by inserting eight bolts in the holes of the four panels. Using eight
excenter ttings lock the bolts.

Step Four

-Attach upper rebox trim (8) to left & right inside panel by securing 2 screws through 2
washers. Tighten all the screws with the allen wrench provided.

-Attach left center panel (9) to left outside panel by securing 1

allen

long

screw through 1 washer.

Tighten the screw with the allen wrench provided.

-Repeat with right center panel (10).

1

2

6

7

3

B

B

8

9

10

C

D

E

long allen