RealFlame 730 Assembly Instructions Manual

Lot:_________

Meijer.com

PO:_________

Fireplace Assembly Instructions

Meridian Wall Hanging Fireplace

Model # 730

730-Meridian-SS-071012

Contents

Meijer.com

Warnings 3

Parts Included 4

Installation Mounting Bracket 5 Mounting the Fireplace 6 Installing the Glass and Ventless Fuel Firebox 7 Filling the trough 8 Lighting and extinguishing the ﬁre 9

Care and Cleaning 10

Warranty Information 11

Thank you for purchasing a Real Flame Fireplace.

Prior to installing or using your Real Flame® Fireplace please be sure to read all of the information contained in this installation, operation and maintenance manual very carefully. This manual will detail exactly how the Ventless Fuel Firebox and replace are intended to be used safely.

Failure to follow these instructions could result in property damage, bodily injury or death.

Children and pets should be kept under close supervision and a safe distance away when the Real Flame® replace is in operation.

Building codes may require extra steps be taken to install your replace in a condo, apartment or townhouse. Please check with local codes to make sure that every precaution is taken.

WARNINGS

Meijer.com

If you have questions please call customer service at: 1-800-654-1704

Read all instructions included with ventless ﬁreplace fuel and ﬁreplace

RISK OF EXPLOSION

Do not attempt to add ventless ﬁreplace fuel to a ﬁre that is already burning.

Use only Real Flame® ventless ﬁreplace fuel in unit. Do not use with any other ﬁreplace fuel or ﬂammable material.

Do not store or use gasoline or other ﬂammable materials, including ventless ﬁreplace fuel, near this product. Vapors from these types of items may collect and increase the risk of ﬁre, explosion or injury.

In case of an emergency use a CO2 extinguisher or baking soda to extinguish the ﬁre.

1. Read entire label and instructions before using ventless ﬁreplace fuel.

2. Do not place ﬁreplace in an area with lots of trac, such as a hallway or entryway.

3. Make sure ﬁreplace is mounted correctly according to the instructions in this manual. Failure to mount the bracket to a stud could cause the unit to detach from wall resulting in serious injury, property damage or death.

4. Never burn trash, paper, or wood in the ﬁreplace. Burn only Real Flame® ventless ﬁreplace fuel in the ﬁreplace.

5. Keep away from children and pets. Unit is not to be operated by children.

6. Do not lean over the unit when lighting.

7. Never burn ventless ﬁreplace fuel outside the designated burn area.

8. Do not burn more than the speciﬁed amount of ventless ﬁreplace fuel at any time. Overﬁlling may cause fuel to spread outside the designated burn area and could result in property damage or serious injury if ignited.

9. Never leave a burning ﬁre unattended.

10. Never move or touch unit during or immediately after burning ventless ﬁreplace fuel. Unit and glass will be extremely HOT. Allow surfaces to cool for 20 minutes before touching.

11. Do not wear ﬂammable or loose clothing when operating the ﬁreplace.

12. Never alter the unit in any manner.

13. Exercise the same precautions as you would with any open ﬁre.

14. DEATH, SERIOUS INJURY OR PROPERTY DAMAGE may result if these warnings are not

followed correctly.

NOTICE: Buyer assumes all responsibility for safety and use that is not

in compliance with these instructions and warnings.

Before using unit, be sure you have read and understood the

Using your

Fireplace

VENTLESS

FIREPLACE

FUEL

FIRST AID

step-by-step instructions. After several burns, soot may develop on the inside of the glass.

Clean with a damp soapy rag or any household glass cleaner.

During the initial burn you may experience a slight odor. Odor is temporary and will be absent on following burns.

Real Flame® Ventless Fireplace Fuel Contains Isopropyl Alcohol Avoid contact with eyes, mucous membranes or prolonged contact with skin. May irritate eyes. Store in a cool, dry place. Keep away from ﬂame, heat or items that spark. Use in well-ventilated areas. Keep out of reach of children and pets. In case of ﬁre, use a CO2 ﬁre extinguisher or baking soda.

If fuel gets in eyes, ﬂush with water for 15 minutes; get medical attention. If ingested, do not induce vomiting; call poison control center or a doctor.

RF wall hanging fireplace WARNINGS 030812

Before installation, check the list below to ensure all pieces have been included

Meijer.com

07301401 : Cream Meridian Fireplace

07303101 : Gray Meridian Fireplace

Qty: 1

01282402 - Scraper

Qty: 1

07300002 - Glass

Qty: 1

01282401 - Eco Burner

Qty: 1

07301403 - Cream Mounting Bracket

07303103 - Gray Mounting Bracket

Qty: 1

01282403 - Trough

Qty: 1

Qty: 14

ATTENTION

07300008- Hardware Kit

Qty: 14

Qty: 4

STOPSTOP

If you have any questions, issues or parts are missing,

email or call Real Flame® customer service prior to

returning to the store where this item was purchased.

Qty: 1

In USA call: 1-800-654-1704

In Canada call: 1-800-363-6443

custserv@realﬂame.com

Step One

Meijer.com

Installing the Mounting Bracket (Figure 1):

Find a suitable location on a wall where the ﬁreplace will be a minimum of 2 feet to the left and right sides and 2 feet above the ﬁreplace from anything ﬂammable or combustible.

Locate a stud. At your determined level drill a 1/8” pilot hole into stud where the center of the mounting bracket will be attached. Mount the top of the bracket to the wall using one screw (A) and washer (B).

Using a bubble level, make sure that the bracket is level and mark the holes in the bottom center and each corner of the bracket on the wall. Drill a 1/8” hole at the bottom center mark and a 3/8“ hole at each corner. Insert a drywall anchor (C) into the four corner holes.

Finish installing the bracket by inserting a screw (A) with a washer (B) into each location.

NOTE: Some holes in the bracket will not be used.

Drill 3/8” hole

Install into drywall

Drill 3/8” hole

Install into drywall

Drill 1/8” hole

Install into wall stud

Drill 3/8” hole

Install into drywall

Drill 1/8” hole

Install into wall stud

Drill 3/8” hole

Install into drywall

Figure 1

Step Two

Meijer.com

Mounting the Envision Fireplace to the bracket:

Figure 2: Place the ﬁreplace on the wall over the bracket as shown. The inside of the top should be resting on the bracket. Bracket will ﬁt inside of the ﬁreplace and will not be seen when attached.

Center the ﬁreplace on the bracket so that the two holes in the top and bottom of the ﬁreplace line up with the holes in the bracket.

Figure 3: Using the two 10-32 - 3/4” machine screws (D), attach the ﬁreplace to the bracket at the top. Be careful not to overtighten the screws.

Repeat with two screws on the bottom of the ﬁreplace.

Figure 2

Wall

Stud

Drywall

Figure 3

Step Three

Meijer.com

Installing the glass and Ventless Fuel Firebox:

Figure 4: Place the glass into the front of the ﬁreplace by sliding it down in the gap between the stainless steel part and the painted section. There are two clips inside that the glass will need to sit in. Make sure that the glass is seated correctly before proceeding.

Figure 4

Figure 5: To secure the glass ﬁrmly in place, turn the thumbscrew attached to the clip clockwise until the glass is held vertically in place.

CAUTION: Do not overtighten thumbscrews.

Figure 6: Note: Glass must be secure prior to installing the Ventless Fuel Firebox.

Install the Ventless Fuel Firebox by placing it into the open area of the Meridian ﬁreplace. When installedcorrectly the Ventless Fuel Firebox should open towards the user.

Glass

Thumbscrew

Figure 5

Figure 6

+ 15 hidden pages

RealFlame 730 Assembly Instructions Manual

Specifications and Main Features

Frequently Asked Questions

User Manual