Ready Access 275L-R SC Installation Manual

PART # 840007**

SC to M.O.E.R. KIT

INSTALLATION INSTRUCTION

The kits listed below are designed for Ready Access
self closing model 275 flush-mount windows.
84000711 Retro Fit Kit - M.O.E.R. "2003" R/L BRZ
84000712 Retro Fit Kit - M.O.E.R. "2003" R/L CLR
84000713 Retro Fit Kit - M.O.E.R. "2003" R/L POW

84000721 Retro Fit Kit - M.O.E.R. "2003" L/R BRZ
84000722 Retro Fit Kit - M.O.E.R. "2003" L/R CLR
84000723 Retro Fit Kit - M.O.E.R. "2003" L/R POW

Models Affected - 275R/L SC, 275L/R SC

(R/L SHOWN – L/R IS OPPOSITE )

To install:

1. Remove the header cover from the top of the window.

2. Attach the Magnet Catch Plate to the top of the door. (See Schematic Below)

MOER MAGNET
CATCH

R/L DOOR SHOWN.
L/R DOOR OPPOSITE

10-32 x 1/2" PH SEMS Screw

POSITION THE MOER MAGNET CATCH ON THE
DOOR AS SHOWN USING TWO (2) EACH 10-32
X 1/2" PHILLIPS HEAD SEMS SCREWS.
DO NOT TIGHTEN . SLIDE DOOR TO MOER
MAGNET ASSEMBLY FOR ALLIGNMENT AND
TIGHTEN.

1815 Arthur Drive * West Chicago, IL 60185
Tel: [phone], Fax: [phone]Website - www.ready-access.com

84000711 INSTALLATION.DOC

FASTEN WITH 8-32 BLK PHIL

3. Drill the holes for mounting the magnet assembly. (See Drawing Below)

4. Attach the Magnet Assembly as shown above.

M.O.E.R.

HEADER

MINI CHASSIS

PAN HEAD SCREW

INSERT THE EDGE OF THE MINI
CHASSIS INTO THE TAB IN THE
BASE OF THE HEADER

5. Install the M.O.E.R. control (Mini Chassis) as shown above and fasten into place.