ReadRight RR1205 User Manual

Safety Data Sheet

Page 1 of 5

February 2018

1. Identification

Name of the product:

ReadRight Two Step ScreenKleen

Product Identification Number(s): RR1205, RR1305

Recommended use:

Surface wipe

Use not recommended: Any use around the eyes or close to an ignition source.

Company:

Advantus Corporation

Telephone: [phone]

12276 San Jose Blvd., Ste. 618 Fax number: 904-482-0099

Jacksonville, FL 32223 Emergency: 1-800-327-1237

CHEMTREC (Transportation): 1-800-424-9300

CPR STATEMENT: This product has been classified in accordance with the hazard criteria of the Canadian

Controlled Products Regulations (CPR) and the SDS contains all the information required by the CPR.

This SDS is designed for workplace employees, emergency personnel and for other conditions and situations

where there is a greater potential for large-scale or prolonged exposure, in accordance with requirements of the

U.S. Government's Occupational Safety and Health Administration (OSHA). It is not applicable for consumer use

of our products. For consumer use, all precautionary and first aid language is provided on the product label in

accordance with the applicable government regulation.

2. Hazard(s) identification

Emergency Overview

OSHA Hazards

Flammable liquid, Irritant

Other hazards which do not result in classification are: May form explosive peroxides.

GHS Classification

Flammable liquids (Cat. 2)

H225

Highly flammable liquid and vapor.

Skin irritation (Cat. 3)

H316

Causes mild skin irritation.

Eye irritation (Cat. 2A)

H319

Causes serious eye irritation.

GHS Label elements, including precautionary statements

Pictogram:

Signal word: Danger

Hazard statements:

H225

Highly flammable liquid and vapor.

H316

Causes mild skin irritation.

H319

Causes serious eye irritation.

H336

May cause drowsiness or dizziness.

Precautionary statements:

P210 Keep away from heat/sparks/open flames/hot surfaces. - No smoking.

P261 Avoid breathing dust/ fume/ gas/ mist/ spray.

P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,

if present and easy to do. Continue rinsing.

Safety Data Sheet

Page 2 of 5

3. Composition / Information on ingredients

Chemical identity: 2-Propanol 30%

Common name:

Isopropyl alcohol, Rubbing alcohol

Numbers of identity: CAS. 67-63-0 EINECS. 200-661-7

Chemical identity: Alkyl Dimethyl Benzyl Ammonium Chloride 0.10%

Common name:

Benzalkonium chloride

Numbers of identity: CAS 68391-01-5

Chemical identity: Alkyl Dimethyl Ethyl Benzyl Ammonium Chloride 0.10%

Common name:

None

Numbers of identity: CAS 68956-79-6

Chemical identity: Ammonium hydroxide 0.05%

Common name:

Aqua Ammonia

Numbers of identity: CAS 1336-21-6 EINECS 215-697-6

Impurities: None of toxicological significance.

4. First-aid measures

P304+313 +341 IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a

position comfortable for breathing. Consult a physician.

P302+352 IF ON SKIN: Wash with soap and water

IF ON SKIN: Wash with soap and water. Rinse until ammonia odor is gone.

P305+351+338 IF IN EYES: Rinse continuously with water for several minutes.

Remove contact lenses if present and easy to do; continue rinsing.

P301+330+331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.

Most important symptoms and effects, both acute and delayed: Severe eye irritation. Skin irritation.

5. Firefighting measures

Suitable extinguishing equipment:

Water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Emergency procedures:

Eliminate ignition source. Evacuate unnecessary personnel. Call appropriate fire fighting crew.

Special protective equipment for firefighters

Wear self contained breathing apparatus for fire fighting if necessary.

Hazardous decomposition products formed under fire conditions. - Carbon oxides, ammonia

Use water spray to cool unopened containers.

6. Accidental release measures

Use personal protective equipment. Avoid breathing, mist or vapors. Ensure adequate ventilation.

Remove all sources of ignition. Evacuate personnel to safe areas. Be aware of possible accumulating

vapors which could form explosive concentrations. Vapors can accumulate in low areas.

Environmental precautions:

Prevent further leakage or spillage if safe to do so. Do not let product enter drains.

Methods and materials for containment and cleaning up

Contain spillage, and then absorb with industrial absorbent, or collect with an electrically protected

vacuum cleaner or by wet-brushing and place in container for disposal according to local regulations.

See also Sec. 13.

7. Handling and storage

Precautions for safe handling:

Avoid contact with skin and eyes. Avoid inhalation of vapors or mist.

Use explosion-proof equipment. Keep away from sources of ignition - No smoking.

Prevent the build up of electrostatic charge.

Conditions for safe storage:

Keep container tightly closed in a dry and well-ventilated place.

Containers which have been opened must be resealed and kept upright to prevent leakage.