RDL UC-1R Datasheet

ACCESSORIES

Model UC-1R

RACK-UP Enclosure

The UC-1R is a tabletop utility chassis for mounting RDL modules and accessories. The front and rear each feature one RACK-UP
mounting bay. The mounting bays fit RACK-UP series products and AMS accessories (using AMS-RU4 adapters, available separately).
The interior provides space to mount various STICK-ON and TX series modules.

Empty

With Product Installed
(RU-SH1 Available Separately)

RDL • 659 6th St. • Prescott, AZ., USA 86301 • [phone] • FAX [phone] • www.rdlnet.com

ACCESSORIES

Model UC-1R

RACK-UP Enclosure

STEP #1
Start the screws into the bottom of the RACK UP but do not
install them all the way.

Installation/Operation

Declaration of Conformity available from rdlnet.com.

Sole EMC specications provided on product package.
Specications are subject to change without notice.

STEP #2
Secure the unit to the mounting chassis by sliding the unit
rearward so that the screws seat into the mounting holes
and tighten the screws. Repeat steps #1 and #2 for any
other RACK-UPs or filler panels that are to be installed.

891-5905A

STEP #3
Slide the top and bottom plates onto the side pieces and
secure the front and back plates to the side pieces with the
8 torx head screws.

Radio Design Labs Technical Support Centers

U.S.A. [phone], [phone]; Fax: [phone]

Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287

STEP #4: Install the trim plates with the 4 crosshead undercut
screws.

NOTE: When installing a RACK UP product that is in a
plastic box start by removing the screws from the back
of the RACK UP. Bend the tabs on the mounting unit up
at a 90° angle. Secure the unit to the mounting chassis
using the screws.