RDL ST-RRB1, FP-RRB1 Datasheet

ACCESSORIES

REAR RACK ADAPTER
FP-RRB1, ST-RRB1 & TX-RRB1

Step 1

Attach TX

module to the

TX-RRB1

with screws.

Step 1

Attach FLAT-

PAK module to

the

FP-RRB1 with

screws.

Installation/Operation

EN55103-1 E1-E5; EN55103-2 E1-E4

Typical Performance reflects product at publication time
exclusive of EMC data, if any, supplied with product.
Specifications are subject to change without notice.

Step 2
Attach

RRB1 with

appropriate

module on

to rear rack

rail with

supplied

screws.

Step 1

Slide the STICK-ON

onto the ST-RRB1.

Once it is fully

seated bend the

locking tab up
slightly to secure
the module to the

ST-RRB1.

891-5214

Radio Design Labs Technical Support Centers

U.S.A. [phone], [phone]; Fax: [phone]

Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287