RDL SMB-TRIPLE-MOUNT, SMB-SINGLE-MOUNT, SMB-QUADRUPLE-MOUNT, SMB-DOUBLE-MOUNT Datasheet

ACCESSORIES

SMB-1B, SMB-2B, SMB-3B, SMB-4B
SMB-1G, SMB-2G, SMB-3G, SMB-4G
SMB-1W, SMB-2W, SMB-3W, SMB-4W

Surface Mount Boxes

(B-Black, G-Gray, W-White)

Step 1

Attach the SMB to

the vertical surface

using up to 6

screws.

(NOT INCLUDED)

Installation/Operation

EN55103-1 E1-E5; EN55103-2 E1-E4

Typical Performance reflects product at publication time
exclusive of EMC data, if any, supplied with product.
Specifications are subject to change without notice.

The SMB-1, 2, 3 and 4 surface
mount boxes hold one, two, three or
four Decora®-style products,
including RDL remote controls and
connector plates.

Step 2

Attach the Decora style

accessories to the SMB

chassis.

Dimensions: Height: 4.63 in. (11.76 cm)
Depth (Inside): 2.4 in. (6.1 cm)
Depth (Outside): 2.5 in. (6.35 cm)
Width SMB-1: 2.88 in. (7.32 cm)
SMB-2: 4.69 in. (11.91 cm)
SMB-3: 6.62 in. (16.81 cm)
SMB-4: 8.43 in. (21.41 cm)

891-5340C

If using conduit, the SMB

may be mounted with

the knockout facing up

or down. The small

knockouts fit metric
conduits; the larger

knockouts fit US conduit.

Radio Design Labs Technical Support Centers

U.S.A. [phone], [phone]; Fax: [phone]

Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287