RDL SF-UN1 Datasheet

Model SF-UN1

USB to Network Interface

y Converts Left and Right USB Audio Channels to two Dante Network Channels
y Supports USB Input Sampling Rates of 32 kHz, 44.1 kHz and 48 kHz
y Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
y Digital Audio Sources Remain in the Digital Domain through the Dante Network Output
y Special Software Not Required for Module Setup
y LED Indicator for Valid Power and Network Sync
y Operation from PoE Power (Class 0, IEEE 802.3af)
y Equipped for SysFlex™ Rack Mounting or Surface Mounting

The SysFlex series is a family of A/V modules providing complex interface solutions at the click of a connector. SysFlex modules provide connectorized
interface between data networks and analog and digital audio devices, networked and conventional amplifiers and other application-specific solutions.
In RDL’s tradition of versatility, SysFlex modules can be used right where they are needed: Rack-mounted, Surface-mounted, or unmounted. They
are light-weight, compact and easy to install with simple, straightforward switch settings and LED indicators. Modules quickly snap into the SysFlex
rack mount and each is firmly secured with a single screw. The racking system segregates network and power wiring from the audio and digital audio
connectors. For connectorized network audio endpoints and A/V system components that provide unparalleled performance and advanced features without
giving up simplicity and ease of installation, SysFlex is the industry’s best value.

APPLICATION: The SF-UN1 is a digital audio interface that conver ts a USB stereo digital audio source to two Dante network audio channels.
The SF-UN1 automatically detects a valid USB input. The input is decoded, re-clocked and transmitted to the Dante network. The module
provides automatic sample rate conversion from the USB input to the Dante network. Special software is not required to configure the module.
The SF-UN1 is a professional grade product for studio quality performance.

The SF-UN1 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of
the unit.

The SF-UN1 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted
operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The
versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems.

RDL • 659 6th St. • Prescott, AZ., USA 86301 • [phone] • FAX [phone] • www.rdlnet.com

Model SF-UN1

USB to Network Interface

Installation/Operation

Declaration of Conformity available from rdlnet.com.

Sole EMC specications provided on product package.
Specications are subject to change without notice.

TYPICAL PERFORMANCE

Network Connector: RJ45 with Link and Speed indicators
Digital Audio Ethernet Protocol: Dante
Transmission Rate: 100 Mbps
Input Sample Rates Supported: 32, 44.1 kHz, 48 kHz
Output (Dante) Sample Rates Supported: 44.1 kHz, 48 kHz (default), 88.2 kHz, 96 kHz
Bit Depth Supported (Dante): 24 bits

Input: USB (Type B receptacle)

Indicators (3): Ethernet Link and Speed (2, rear panel); Sync (front panel)

Radio Design Labs Technical Support Centers

U.S.A. [phone], [phone]; Fax: [phone]

891-7540

Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287

Ambient Operating Environment: 0° C to 50° C
Power Requirement: PoE Class 0, IEEE 802.3af
Dimensions: 2.79” (7.09 cm) W; 1.68” (4.27 cm) H;

5.77” (14.66 cm) D
Package Type: Cardboard Box
Package Dimensions: 7 x 4.375 x 2.25 in.
Shipping Weight: 1.055 lbs.
WEEE weight: 0.84 lbs.
Tariff code: 8517.18.0050