RDL SF-RA1 Datasheet

ACCESSORIES

Model SF-RA1

SysFlex™ Rack Adapter

The SF-RA1 rack mounts several SysFlex modules in fixed or mobile installations. Modules quickly snap into the SysFlex rack mount
and each is firmly secured with a single screw. The racking system segregates network and power wiring from the audio and digital
audio connectors.

Front

RDL • 659 6th St. • Prescott, AZ., USA 86301 • [phone] • FAX [phone] • www.rdlnet.com

Rear

ACCESSORIES

Model SF-RA1

SysFlex™ Rack Adapter

STEP #1
Start the screw into the bottom of the SYSFLEX unit but do
not install it all the way.

Installation/Operation

Declaration of Conformity available from rdlnet.com.

Sole EMC specications provided on product package.
Specications are subject to change without notice.

STEP #2
Place the SYSFLEX module into the SF-RA1 with the screw
positioned in the rear hole of the dog-bone cutout. Slide
the module forward so that the tab slides into the slot.

STEP #3
Secure the module to the mount by tightening the screw.

TYPICAL PERFORMANCE

Dimensions: 19” (48.26 cm) W; 1.75” (4.45 cm) H; 10” (25.4 cm) D
Mounting: The rack adapter provides for mounting of SysFlex modules
with combined widths of up to 17 inches.

Radio Design Labs Technical Support Centers

891-7535

U.S.A. [phone], [phone]; Fax: [phone]

Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287