RDL SAS-HCB Datasheet

Installation/Operation

ACCESSORIES

Handle Bar Bracket
SAS-HCB

EN55103-1 E1-E5; EN55103-2 E1-E4

Typical Performance reflects product at publication time
exclusive of EMC data, if any, supplied with product.
Specifications are subject to change without notice.

OR

Install mounting bracket to flat surface using
either the screw holes or slots provided for the
mounting screws.

_________________________________________________________________________________________________________

Install bracket to pipe or tubing using the smallest
possible clamp provided. The clamp must be
oriented as shown with the “tail” inside

the bracket.

891-9136

Secure the unit in
the mounting
bracket:

•First, seat the
bottom bracket in
the SAS-HC8 bottom
rear slot;

•Then tilt the unit

Radio Design Labs Technical Support Centers

U.S.A. [phone], [phone]; Fax: [phone]

Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287

back until it snaps
and locks into
position.