RDL RU-NFDP, RU-NFD Datasheet

RACK-UP® SERIES

Models RU-NFD & RU-NFDP

Network to Format-A Interface/Distributor

y Converts Four Dante Network Audio Signals to RDL Format-A and Aux
y Easy Installation with Format-A Connections on RJ45 through CATx Cable
y Three Dante Audio Signals Feed Format-A Output Pairs A, B and C
y Fourth Dante Audio Signal Feeds Auxiliary Balanced +4 dBu Line Output
y Format-A Pairs are Distributed to Three Separate Format-A Output Jacks
y Signal LEDs Indicate Audio for Each of the Four Received Signal Channels
y High Resolution 24 Bit Digital to Analog Conversion
y Legendary RDL Analog Filtering Enhances Superb Audio Performance
y Powers Remote Format-A Receivers through Primary Output Jack
y External 24 Vdc Supply Powers Format-A Receivers through All Output Jacks
y LED Indicators Show Network Sync Status
y Outputs Mute when Digital Audio Inputs are Inactive
y Normal or Hot-Standby Operation from PoE (Model RU-NFDP)
y Compatible with Wide Array of RDL Format-A Active and Passive Receivers
y Equipped for Rack Mounting or Surface Mounting

The RU-NFD modules are Dante audio network interface products compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in equipment racks, closets,
conference tables and on shelves or backboards in commercial/industrial installations.

APPLICATION: The RU-NFD is an RDL Format-A sender/distributor that connects to a Dante-enabled network. It converts three Dante audio channels to RDL Format-A. Each
network channel corresponds to Pair A, B or C of the Format-A outputs. The unit converts a four th Dante audio channel to a balanced line-level AUX output.

One front-panel green signal LED corresponds to each of the four Dante input channels. Received audio level is indicated on the variable-intensity LED indicator, facilitating setup
when a networked computer is not connected at the module’s location.

The Format-A output is distributed to three separate rear-panel RJ45 jacks. Each Format-A output jack provides up to 200 mA of power to connected Format-A receivers.
Multiple receivers may be daisy chained from one output jack, or may be connected by home run to each of the three outputs. Higher current Format-A receivers, such as RDL
D-PSP1A powered Decora-style speakers, are to be individually connected to a separate output jack.

The RU-NFD output jacks support the entire range of Format-A receivers, making each output pair available for end-user connection on various wall plates, or feeding other
equipment using rack-mounted, shelf-mounted or utility Format-A receivers. The wide array of Format-A receivers provide compatibility with commercial audio equipment
operating at standard professional levels. High resolution digital audio converters coupled with RDL’s renowned analog filters provide superior fidelity with a very low noise floor.
Each Format-A receiver may be connected near the RU-NFD or up to several thousand feet distant.

The RU-NFD is powered from an external 24 Vdc power supply, available separately. The external supply powers the RU-NFD and Format-A receivers connected to all three
Format-A outputs. The RU-NFDP is equipped for PoE which powers the RU-NFD and Format-A receivers connected to the primary Format-A output jack. Audio is also distributed
to the other two output jacks. Remote Format-A receivers connected to those other two output jacks are only powered from the RU-NFDP if an external 24 Vdc power supply is
connected. If PoE power and an external 24 Vdc supply are both feeding an RU-NFDP, the unit will run from the external supply and will seamlessly switch over to PoE power
upon loss of the external 24 V supply. The power feeding each Format-A RJ45 connector is separately protected by an automatically resetting fuse. A power LED is associated
with each connector, facilitating identification of wiring faults.

PoE relies on the use of a PoE enabled network switch. The RU-NFDP will reserve power from the switch even while being powered from an external 24 Vdc supply.

The RU-NFD is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured product is
engineered and manufactured in the U.S.A for continuous duty in demanding installations. Built to last. Built to outperform.

RDL • 659 6th St. • Prescott, AZ., USA 86301 • [phone] • FAX [phone] • www.rdlnet.com

RACK-UP® SERIES

Models RU-NFD & RU-NFDP

Network to Format-A Interface/Distributor

Installation/Operation

Declaration of Conformity available from rdlnet.com.

Sole EMC specications provided on product package.
Specications are subject to change without notice.

TYPICAL PERFORMANCE

Network Connector: RJ45 with Link and Speed indicators
Digital Audio Ethernet Protocol: Dante
Transmission Rate: 100 Mbps
Sample Rates Supported: 44.1 kHz, 48 kHz (default)
Bit Depth Supported: 24 bits
Audio Operating Levels: -20 dBFS = +4 dBu

Format-A Outputs RDL Format-A RJ45 (3)
Format-A Signal Pairs Used (3): A, B, C (each Format-A output)
Frequency Response: 20 Hz to 20 kHz (± 0.75 dB)
THD+N: < 0.1%
Noise below +4 dBu: < -85 dB (pair active); < -100 dB (pair muted)
Crosstalk: < 80 dB (20 Hz to 20 kHz)
Headroom above +4 dBu: > 18 dB

AUX Output
Output: Balanced, detachable terminal block
Output Level: +4 dBu (nominal)

Output Impedance: 150 Ω balanced; 75 Ω unbalanced

Frequency Response: 20 Hz to 20 kHz (± 0.5 dB)
THD+N: < 0.1%
Noise below +4 dBu: < -75 dB
Crosstalk: < 80 dB (20 Hz to 20 kHz)
Headroom above +4 dBu: > 18 dB

Indicators (12): Power In (1); Power Out (3); Audio Signal LEDs (4),
Network Sys and Sync (2), Ethernet Link and Speed (2)
Power Connections (2): Power Jack; Detachable Terminal Block
Ambient Operating Environment: 0° C to 40° C
Power Requirement: 24 Vdc @ 120 mA plus connected loads,
or PoE (RU-NFDP)
PoE (RU-NFDP): Class 0, IEEE 802.3af
Dimensions: 5.8” (15 cm) W; 1.7” (4.3 cm) H; 5.2” (13.2 cm) D
Package Type: Cardboard Box
Package Dimensions: 6 x 6 x 2.625 in.
Shipping Weight: 1.605 lbs. (RU-NFD); 1.63 (RU-NFDP)
WEEE weight: 1.345 lbs. (RU-NFD); 1.37 (RU-NFDP)
Tariff code: 8517.18.0050

891-3545A

Radio Design Labs Technical Support Centers

U.S.A. [phone], [phone]; Fax: [phone]

Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287