RDL RU-MX5 Installation Instructions Manual

TM

R D L™ R a d i o D e s i g n L a b s

RACK-UP

™

SERIES

Model RU-MX5
Audio Mic/Line Mixer

Specialists in Practical Precision Engineering

Installation Instructions

Conforms to the immunity and emission
specifications published in the EMC Technical
Bulletin for this product, incorporated herein.

™

TYPICAL PERFORMANCE

Inputs: 4 Selectable Mic or Line Level; 1 dedicated Line Level
Input Impedance: Mic: 150 to 600 Ω Balanced; 5 kΩ Unbalanced

Line Level Output: 200Ω to drive Low or High Impedance Balanced or Unbalanced Lines; +4 dBu
Mic Level Output: 150Ω Balanced; -45 dBu
Gain: Mic: Off to 65 dB

Frequency Response: Mic: 70 Hz - 30 kHz (+/- 1.5 dB)
External Phantom Power: 24 Vdc Maximum

Total Harmonic Distortion: < 0.030% (0.0125% typical)
Headroom: > 18 dB above +4 dBu output
Metering: 3 L.E.D. Indicators; -20 dB, 0 dB, +5 dB, Peak Reading

Noise: < -70 dB Below +4 dBu Output (All Channels Active; Mic Gain = 50 dB;
Power Requirements: 24 to 33 Vdc @ 65 mA, Ground-referenced

U.S.A. [phone], [phone]; Fax: [phone]; http://www.rdlnet.com

891-0054A

Line: 10 kΩ Balanced or Unbalanced

Line: Off to 15 dB
Line: 20 Hz - 20 kHz (+/- 0.5 dB)

(0 dB Referred to Balanced Line Output of +4 dBu)
Line Gain = Unity)

Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287

Radio Design Labs Customer Service Centers