RDL RC-HPS1 Datasheet

ACCESSORIES

Model RC-HPS1
Power Supply Chassis

Installation/Operation

EN55103-1 E1-E5; EN55103-2 E1-E4

EN55103-1 E1-E5; EN55103-2 E1-E4

Typical Performance reflects product at publication time

Typical Performance reflects product at publication time
exclusive of EMC data, if any, supplied with product.

exclusive of EMC data, if any, supplied with product.
Specifications are subject to change without notice.

Specifications are subject to change without notice.

Step 1

Slide the Power Supply into the
RC-HPS1 Bracket.

Step 2

With the mounting screws
partially installed, slide them
into the tabs on the rear of
the RC-HPS1.

Step 3

Secure the module by
tightening the mounting
screws with a suitable
driver.

TYPICAL PERFORMANCE

Capacity: Compatible with all RDL desktop power supplies and with any desktop

power supply with maximum dimensions:

5.8” (14.7 cm) x 3” (7.6 cm) x 1.7” (4.3 cm)

Material: 18-guage
Finish: RDL Black

891-5555

Radio Design Labs Technical Support Centers

U.S.A. [phone], [phone]; Fax: [phone]

Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287