RDL RC-1UR Datasheet

ACCESSORIES

Model RC-1UR

19” Universal Rack Chassis

The RC-1UR is a 1RU utility chassis for mounting RDL modules and accessories. The front and rear each feature three RACK-UP
mounting bays. The mounting bays fit RACK-UP series products and AMS accessories (using AMS-RU4 adapters, available separately).
The interior provides space to mount various STICK-ON and TX series modules.

Empty & Cover On

With Product Installed & Cover Off

(RU-MX5ML, RU-SM16D and RU-SP1 available separately)

Empty & Cover Off

With Product & Cover On

RDL • 659 6th St. • Prescott, AZ., USA 86301 • [phone] • FAX [phone] • www.rdlnet.com

ACCESSORIES

Model RC-1UR

19” Universal Rack Chassis

Installation/Operation

Declaration of Conformity available from rdlnet.com.

Sole EMC specications provided on product package.
Specications are subject to change without notice.

(Bottom View)

STEP #1
Start the screws into the bottom of the RACK-UP unit but do not
install them all the way.

(Bottom View)

STEP #3
Slide the unit forward until the screws are seated in the
forward position of the cutout. Tighten the screws to secure
the unit in the chassis.

STEP #2
Place the RACK-UP unit onto the chassis. The screw heads
will pass through the rear position in the cutout.

(Bottom View)

STEP #4
Install the top cover and secure with the four screws.

891-3580A

NOTE: When installing a RACK UP product that is in a
plastic box start by removing the screws from the back
of the RACK UP. Bend the tabs on the mounting unit up
at a 90° angle. Secure the unit to the mounting chassis
using the screws.

Radio Design Labs Technical Support Centers

U.S.A. [phone], [phone]; Fax: [phone]

Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287