p
ACCESSORIES
Model PM-3T/W/G
Pole Mount
clamp and tray
Tray
1. Slide hose
on the pole.
2. Secure the tray by
tightening the hose clamp to
mounting brackets using a
Secure with hose clam
Mount your RDL
products before
or after tray
installation!
Installation/Operation
screwdriver.
EN55103-1 E1-E5; EN55103-2 E1-E4
Typical Performance reflects product at publication time
exclusive of EMC data, if any, supplied with product.
Specifications are subject to change without notice.
.
3. Slide cover
into position.
The large hole in the
top cover allows for
easy installation of
all required wiring!
4. Tighten the
two screws to
secure the cover
The PM-3T is a tray that mounts above a projector using a standard (1.5" I.D.) round projector pole or any smaller
round or rectangular pole. The tray accommodates any RU, TX, FP or STICK-ON Audio Power Amplifier and its
associated RDL power supply. The unique design of the PM-3T permits installation above a projector without
removing the projector or pole. The durable steel tray is constructed in two pieces to slide over the projector pole
from each side, making installation fast and convenient. The PM-3T is available in three colors. The standard color
is black (PM-3T). It is also available in white (PM-3TW) and gray (PM-3TG).
Dimensions (each): Height: 2.96” (7.52cm) Depth: 10” (25.4cm) Width: 10” (25.4cm)
Material: 18-gauge steel
Finish: RDL Black, White, Gray
Radio Design Labs Technical Support Centers
U.S.A. (800) 933-1780, (520) 778-3554; Fax: (520) 778-3506
891-5380A
Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287
Loading...