RDL HR-HRA1, HRRA2 User Manual

HALF-RACK ACCESSORIES

Models
HR-RA2 HR-HRA1 HR-FP1 AMS-HR6

19" Rack Adapter 10.4" Rack Adapter Filler Panel AMS Mounting Panel

HR-HRA1 10.4" Rack Adapter

HR-RA2 19" Rack Adapter

HR-FP1 Filler Panel

AMS-HR6 AMS Mounting Panel

RDL  659 6th St.  Prescott, AZ., USA 86301  [phone]  FAX [phone]  www.rdlnet.com

Installation/Operation

HALF-RACK ACCESSORIES

Models

EN55103-1 E1-E5; EN55103-2 E1-E4

Typical Performance reflects product at publication
time exclusive of EMC data, if any, supplied with product.

HR-RA2 HR-HRA1 HR-FP1 AMS-HR6

19" Rack Adapter 10.4" Rack Adapter Filler Panel AMS Mounting Panel

Start the screws provided with the
HR module or panel in the
threaded bottom holes; do not

HR-RA2 19" rack adapter
with HALF-RACK module and
HR-FP1 filler panel installed.

STEP 1

HALF-RACK Module

HR-FP1 Filler Panel or
AMS-HR6 AMS Mounting Panel

STEP 2

Place the HR module or panel
in the rack adapter by passing
the screw heads through the
forward holes of the chassis
cutouts.

HR-HRA1 10.4" rack adapter
with HALF-RACK module
installed.

TYPICAL PERFORMANCE

Construction: Steel
Finish: RDL Black texture

HR-RA2 Dimensions: 1RU 19” Rack mount
Height: 1.75 in 4.45 cm
Length: 19 in 48.2 cm
Depth: 8 in 20.32 cm

HR-HRA1 Dimensions: 1RU 10.4” Rack mount
Height: 1.75 in 4.45 cm
Length: 10.4 in 26.4 cm
Depth: 8 in 20.32 cm

Radio Design Labs Technical Support Centers

U.S.A. [phone], [phone]; Fax: [phone]

891-3270A

Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287

Slide the HR module or panel

STEP 3

toward the rear of the rack
adapter until seated in position,
then tighten the screws.

HR-FP1 and AMS-HR6
Dimensions: Height: 1.7 in 4.3 cm
Length: 8.6 in 20.6 cm
Depth: 1.16 in 2.95 cm