RDL HD-RA2 Datasheet

ACCESSORIES

Model HD-RA2
Rack Adapter

Step 1

Remove the 4 feet

from the bottom of

the HD series unit

and install two

washers (provided)

onto each screw.

Installation/Operation

EN55103-1 E1-E5; EN55103-2 E1-E4

Typical Performance reflects product at publication time
exclusive of EMC data, if any, supplied with product.
Specifications are subject to change without notice.

Step 2

Slide the screw

heads through the

holes in the HD-RA2.

891-3370

Step 3

Slide the HD series unit

back and tighten the

screws to secure the unit

to the HD-RA2.

Step 4
Snap the Power Supply
bracket (included) onto

the side of the HD-RA2
in the position desired.

Radio Design Labs Technical Support Centers

U.S.A. [phone], [phone]; Fax: [phone]

Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287