EZ-VM22E includes power supply with North American plug
EZ-VM22EX includes worldwide power supply (specify plug)
VGA/XGA Switcher/Equalized Amplifier
RDL EZ Series products provide the highest level of value to A/V professionals and A/V users who demand professional quality.
RDL EZ Series products provide the highest level of value to A/V professionals and A/V users who demand professional quality.
For long-term performance, quality and value, you have made the EZ choice. EZ products are made in the USA by RDL, the
For long-term performance, quality and value, you have made the EZ choice. EZ products are made in the USA by RDL, the
inventor of application-specific modules bringing decades of experience as the world’s leading manufacturer of high-reliability
inventor of application-specific modules bringing decades of experience as the world’s leading manufacturer of high-reliability
performance products to the A/V industry. Visit the RDL website for hundreds of professional A/V products made in the USA by RDL.
performance products to the A/V industry. Visit the RDL website for hundreds of professional A/V products made in the USA by RDL.
www.rdlnet.com
www.rdlnet.com
Decades of Performance, Quality and Value
Decades of Performance, Quality and Value
RDL• 659 N. 6th Street • Prescott, AZ • USA 86301 • Sales: 800-281-2683 • 928-443-9391
RDL• 659 N. 6th Street • Prescott, AZ • USA 86301 • Sales: 800-281-2683 • 928-443-9391
Reliable Full-Size Switches for Switched Functions
•
Switch-Selectable TTL or Video 75 Ω Input Sync
•
NORM ID BIT Connects LOCAL MONITOR and INPUT 1 ID
•
Front-Panel ID Bit Selection for Each Input
•
DC RGB Coupling, Output Polarity and Offset Follow Input
•
Rear-Panel GAIN and EQ Peaking Trimmers
The EZ-VM22E is a high-resolution computer video source selector and distribution amplifier with two inputs and two outputs.
A front-panel switch selects between the inputs. Each input has an associated ID BIT switch to assure compatibility with various
computers. The sync for input 1 is front-panel switch-selectable between standard TTL or 75 Ω video. One of the two outputs
is indivually buffered for driving the computer monitor. The second output is driven by separate output amplifiers that include
rear-panel gain and equalization trimmers that provide adjustable compensation for quality monitor cable lengths exceeding
100 m (300 ft). All switched functions are easily accessible on the front panel. Input switching is fully solid state for long-term
reliable immunity from switch noise and the bandwidth limitations of mechanical switches. The EZ-VM22E is used in houses of
worship, restaurants, clubs, meeting rooms, educational facilities, conference rooms, stores and commercial A/V systems.
TYPICAL APPLICATION
Monitor
Projector
Laptop
EZ-VM22E
Computer
www.rdlnet.com • •• www.rdlez.com
www.rdlnet.com • •• www.rdlez.com
SYNC INPUT SELECTOR
The SYNC switch selects between standard computer card TTL sync
and RGBHV 75 ohm video format sync. Set the switch to the NORM TTL
position (button OUT) for use with a normal computer video source; set to
the VIDEO 75 OHM position (button IN) for use with a 75 ohm sync source.
ID BITS (separate switch provided for each input)
Set to NORM OFF position (button OUT) unless computer video
output fails to operate with the connected monitors; set switch
to ON position (button IN) if needed to activate computer video
monitor output (not typically required unless using certain laptops).
VIDEO INPUT 1
Connect the primary video source to INPUT 1.
VIDEO INPUT 2
Connect the secondary video
source to INPUT 2.
INPUT SELECTOR
Select INPUT 1 (button IN) or
INPUT 2 (button OUT) to feed
the rear-panel OUTPUT jacks.
POWER INDICATOR
Glows blue when the
product is connected to
a valid power source.
24 VDC INPUT
Insert plug from
power supply.
Rotate 1/4 turn
clockwise to lock.
LOCAL MONITOR OUTPUT
Connect the LOCAL MONITOR
output to the input of the local
computer video monitor.
EQUALIZATION ADJUSTMENT
If a long video cable is connected to the output, turn the EQ
control clockwise until the picture sharpness appears normal.
If a short output cable is connected, or if the picture clarity is
normal, set the EQ control fully counter-clockwise.
FOR BEST PICTURE QUALITY, REMOTE VIDEO MONITOR “OPTIMIZATION” FUNCTION SHOULD BE RUN, IF PROVIDED.
FIXED MOUNTINGRUBBER FEET ATTACHMENT
POWER CONNECTION
POWER CONNECTION
Insert Power Plug
Insert Power Plug
Rotate 1/4-turn
Rotate 1/4-turn
clockwise to lock
clockwise to lock.
Rotate 1/4-turn
Rotate 1/4-turn
counter-clockwise
counter-clockwise
to unlock
to unlock.
FIXED MOUNTINGRUBBER FEET ATTACHMENT
Screw
Screw
directly to flat
directly to flat
surface without
surface without
installing rubber feet.
installing rubber feet.
MONITOR OUTPUT
Connect to the video input of a
video monitor or projector.
GAIN ADJUSTMENT
If a long video cable is connected to the
output, turn the GAIN control clockwise
until the picture brightness appears normal.
If a short output cable is connected, or if
the picture brightness is normal, set the
GAIN control fully counter-clockwise.
Recess
Recess
Bottom View
Bottom View
of chassis
of chassis
Peel backing and stick the 4 rubber
Peel backing and stick the 4 rubber
feet to chassis in recesses provided.
feet to chassis in recesses provided.
SELECTED MOUNTING ACCESSORIES
EZ-RA6
Rack Adapter for 6 Increments of 1/6 Rack Width
EZ-CC6
Component Chassis for 6 Increments of 1/6 Rack Width
Complete accessory listing available at: rdlez.com
EZ-SMB2
Surface Mount Bezel for 1/3 Rack Width Products
EZ-UCB2
EZ-UCB2
Under-Counter Brackets 1/6 or 1/3 Rack Width
Under-Counter Brackets 1/6 or 1/3 Rack Width
TYPICAL PERFORMANCE
TYPICAL PERFORMANCE
Inputs (2): VGA - QXGA RGBHV or RGB with combined sync
Outputs (2): LOCAL MONITOR (1, Buffered, ID bit pass-thru to INPUT 1), MONITOR (1, with GAIN and EQ trim)
Gain: Unity (LOCAL MONITOR output), Unity to +6 dB (MONITOR output)
Equalization (peaking): None (LOCAL MONITOR output), Adjustable 0 to +8 dB at 50 MHz (MONITOR output)
Video bandwidth: > 400 MHz
Output offset: ±5 mV typ. (75 Ω load)
Video impedance: 75 Ω (Input and output)
Sync (HV) input: 500 Ω TTL or 75 Ω Video (Switch-selectable), 0.7 V to 5 V p-p; Sync (HV) output: 5V TTL
Sync (HV) Propogation Delay: < 4 nS typ.
Sync (HV) Rise Time: < 4 nS typ.
Sync (combined): Output follows input
Bit Control: Switch-selectable (individual selector per input, pin 4, over-rides LOCAL MONITOR jack ID bit pass-thru)
24 Vdc power supply current: 70 mA (idle), 80 mA (max.)
Power supply input voltage: 100 to 240 VAC
Warranty: 3 Years; contact RDL technical support department for assistance
Case dimensions: 5.75” (14.6 cm)W x 5” (12.7 cm)D
Mounting size: 1/3 rack width
EZ-DC2
Desktop Chassis 1/3 Rack Width
EZ-SD2
Storage Drawer 1/3 Rack Width
Use In Place of Filler Panel
Holds Adapters and Cables
Mounts in EZ-CC6 and EZ-RA6