Page 1
EZ-UCB2
Under-Counter Brackets
INSTALLATION
MANUAL
RDL EZ Series products provide the highest level of value to A/V professionals and A/V users who demand professional quality.
For long-term performance, quality and value, you have made the EZ choice. EZ products are made in the USA by RDL, the
inventor of application-specific modules bringing decades of experience as the world’s leading manufacturer of high-reliability
performance products to the A/V industry. Visit the RDL website for hundreds of professional A/V products made in the USA by RDL.
www.rdlnet.com
Decades of Performance, Quality and Value
RDL• 659 N. 6th Street • Prescott, AZ • USA 86301 • Sales: 800-281-2683 • 928-443-9391
Tech Support: 800-933-1780 • 928-778-3554 • RDL Europe Sales & Support: (31) 20-6238-983
Page 2
EZ-UCB2
Under-Counter Brackets
•
Brackets Slide on EZ Case for Easy Alignment
•
EZ Product Secures Quickly Using Two Screws
•
Brackets Fasten to Underside of Counter or Shelf
MOUNTING SCREW CENTERS
For 1/6 rack width EZ product mounting, hole
centers are spaced 3.5” (8.9 cm).
MOUNTING SCREW CENTERS
For 1/3 rack width EZ product mounting, hole
centers are spaced 6.35” (16.13 cm).
www.rdlnet.com • • • www.rdlez.com
Page 3
MOUNTING
STEP 1
Slide each mounting bracket over the EZ product end cap.
Start the bracket at the rear of the product and slide it forward.
STEP 2
Align screw holes with the mounting holes on the bottom
of the EZ product and install the mounting screws to secure
the brackets to the product.
STEP 3
Fasten the brackets to the underside of a counter or shelf using screws
(not included).
Page 4
OTHER SELECTED EZ SERIES MOUNTING ACCESSORIES
EZ-RA6
Rack Adapter for 6 Increments of 1/6 Rack Width
EZ-CC6
Component Chassis for 6 Increments of 1/6 Rack Width
EZ-SMB1
Surface Mount Bezel for 1/6 Rack Width Products
EZ-SD1
Storage Drawer 1/6 Rack Width
Use EZ-SD1 and EZ-SD2 in Place of Filler Panel(s)
Drawers
Hold Adapters and Cables
Mount in EZ-CC6 and EZ-RA6
EZ-DC1 EZ-FP1
Desktop Chassis 1/6 Rack Width Filler Panel 1/6 Rack Width
EZ-DC2
Desktop Chassis 1/3 Rack Width
EZ-SMB2
Surface Mount Bezel for 1/3 Rack Width Products
EZ-SD2
Storage Drawer 1/3 Rack Width
Mounts in EZ-CC6 and EZ-RA6
Complete accessory listing available at: rdlez.com
Copyright © 2009 Radio Design Labs, Inc. RDL, Radio Design Labs and the RDL logo are registered trademarks of Radio Design Labs, Inc. Data reflects product at publication time, subject to change without notice. “Made in USA” applies to all EZ products except power supplies.
891-1640
Loading...