Page 1
INSTALLATION
MANUAL
EZ-SMB1 and EZ-SMB2
Surface Mount Bezels
EZ-SMB1
EZ-SMB2
RDL EZ Series products provide the highest level of value to A/V professionals and A/V users who demand professional quality.
For long-term performance, quality and value, you have made the EZ choice. EZ products are made in the USA by RDL, the
inventor of application-specific modules bringing decades of experience as the world’s leading manufacturer of high-reliability
performance products to the A/V industry. Visit the RDL website for hundreds of professional A/V products made in the USA by RDL.
www.rdlnet.com
Decades of Performance, Quality and Value
RDL• 659 N. 6th Street • Prescott, AZ • USA 86301 • Sales: 800-281-2683 • 928-443-9391
Tech Support: 800-933-1780 • 928-778-3554 • RDL Europe Sales & Support: (31) 20-6238-983
Page 2
EZ-SMB1 and EZ-SMB2
Surface Mount Bezels
Mounts EZ Product in Any Flat Surface
•
Bezel Covers Mounting Cutout
•
EZ Product Quickly Fastens to Bezel Using Only Two Screws
•
MOUNTING HOLES
For EZ-SMB1, horizontal
hole centers are spaced
3.52” (8.94 cm).
MOUNTING HOLES
For EZ-SMB1 or EZ-SMB2,
vertical hole centers are
spaced 2.1” (5.33 cm).
MOUNTING HOLES
For EZ-SMB2, horizontal hole centers
are spaced 6.39” (16.23 cm).
www.rdlnet.com • • • www.rdlez.com
Page 3
MOUNTING
STEP 1
Cut a square clearance opening in the mounting surface:
EZ-SMB1 recommended cutout: 3.125” (7.9 cm)W x 1.75” (4.4 cm)H
EZ-SMB2 recommended cutout: 6” (15.2 cm)W x 1.75” (4.4 cm)H
STEP 2
Slide EZ product into the bezel from the rear, align bezel screw holes with
the mounting holes on the bottom of the EZ product and install the mounting
screws to secure the bezel to the product.
STEP 3
Insert EZ product and bezel into the pre-cut opening and screw the bezel to the mounting sur face.
EZ-SMB1 overall dimensions: 4.1” (10.4 cm)W x 2.7” (6.9 cm)H
EZ-SMB2 overall dimensions: 7” (17.8 cm)W x 2.7” (6.9 cm)H
Page 4
OTHER SELECTED EZ SERIES MOUNTING ACCESSORIES
EZ-RA6
Rack Adapter for 6 Increments of 1/6 Rack Width
EZ-CC6
Component Chassis for 6 Increments of 1/6 Rack Width
EZ-UCB2
Under-Counter Brackets 1/6 or 1/3 Rack Width
EZ-SD1
Storage Drawer 1/6 Rack Width
Use EZ-SD1 and EZ-SD2 in Place of Filler Panel(s)
Drawers
Hold Adapters and Cables
Mount in EZ-CC6 and EZ-RA6
EZ-DC1
Desktop Chassis 1/6 Rack Width
EZ-FP1
Filler Panel 1/6 Rack Width
Mounts in EZ-CC6 and EZ-RA6
EZ-SD2
Storage Drawer 1/3 Rack Width
EZ-DC2
Desktop Chassis 1/3 Rack Width
Complete accessory listing available at: rdlez.com
Copyright © 2009 Radio Design Labs, Inc. RDL, Radio Design Labs and the RDL logo are registered trademarks of Radio Design Labs, Inc. Data reflects product at publication time, subject to change without notice. “Made in USA” applies to all EZ products except power supplies.
891-1637
Loading...