Page 1
INSTALLATION
MANUAL
EZ-SD1 and EZ-SD2
Storage Drawers
EZ-SD1
EZ-SD2
RDL EZ Series products provide the highest level of value to A/V professionals and A/V users who demand professional quality.
For long-term performance, quality and value, you have made the EZ choice. EZ products are made in the USA by RDL, the
inventor of application-specific modules bringing decades of experience as the world’s leading manufacturer of high-reliability
performance products to the A/V industry. Visit the RDL website for hundreds of professional A/V products made in the USA by RDL.
www.rdlnet.com
Decades of Performance, Quality and Value
RDL• 659 N. 6th Street • Prescott, AZ • USA 86301 • Sales: 800-281-2683 • 928-443-9391
Tech Support: 800-933-1780 • 928-778-3554 • RDL Europe Sales & Support: (31) 20-6238-983
Page 2
EZ-SD1 and EZ-SD2
Storage Drawers
•
Use In Place of Filler Panel(s)
•
Holds Adapters and Cables
•
Mount in EZ-CC6 or EZ-RA6
DRAWER INSTALLATION IN EZ-CC6
Insert drawer bottom glide tabs into the
EZ-CC6 base with the EZ-CC6 cover
removed. Slide the drawer into position.
Installation of the EZ-CC6 cover prevents
removal of the drawer.
Cover
EZ-CC6
Component Chassis
EZ Drawer
DETAIL: Angle the drawer slightly to
insert the glide tabs into the slot(s).
(EZ-CC6 rear view with cover removed)
www.rdlnet.com • • • www.rdlez.com
Base
Page 3
DRAWER INSTALLATION IN EZ-RA6
STEP 1
Remove EZ-RA6 base plate screws
and slide the base plate forward.
STEP 2
Insert the glide tabs into
the base plate slot(s).
Base plate
screw holes
EZ-RA6 base plate bottom view
STEP 3
Slide drawer forward.
STEP 4
Slide base plate back into the EZ-RA6
rack mount tray and secure the base
plate using the three screws.
Base plate screws
Page 4
OTHER SELECTED EZ SERIES MOUNTING ACCESSORIES
EZ-RA6
Rack Adapter for 6 Increments of 1/6 Rack Width
EZ-CC6
Component Chassis for 6 Increments of 1/6 Rack Width
EZ-SMB1
Surface Mount Bezel for 1/6 Rack Width Products
EZ-UCB2
Under-Counter Brackets 1/6 or 1/3 Rack Width
EZ-DC1
Desktop Chassis 1/6 Rack Width
EZ-SMB2
Surface Mount Bezel for 1/3 Rack Width Products
EZ-FP1
Filler Panel 1/6 Rack Width
Mounts in EZ-CC6 and EZ-RA6
EZ-DC2
Desktop Chassis 1/3 Rack Width
Complete accessory listing available at: rdlez.com
Copyright © 2009 Radio Design Labs, Inc. RDL, Radio Design Labs and the RDL logo are registered trademarks of Radio Design Labs, Inc. Data reflects product at publication time, subject to change without notice. “Made in USA” applies to all EZ products except power supplies.
891-1633
Loading...