INSTALLATION AND
INSTALLATION AND
OPERATION MANUAL
OPERATION MANUAL
EZ-PD3
Power Supply Distributor
RDL EZ Series products provide the highest level of value to A/V professionals and A/V users who demand professional quality.
RDL EZ Series products provide the highest level of value to A/V professionals and A/V users who demand professional quality.
For long-term performance, quality and value, you have made the EZ choice. EZ products are made in the USA by RDL, the
For long-term performance, quality and value, you have made the EZ choice. EZ products are made in the USA by RDL, the
inventor of application-specific modules bringing decades of experience as the world’s leading manufacturer of high-reliability
inventor of application-specific modules bringing decades of experience as the world’s leading manufacturer of high-reliability
performance products to the A/V industry. Visit the RDL website for hundreds of professional A/V products made in the USA by RDL.
performance products to the A/V industry. Visit the RDL website for hundreds of professional A/V products made in the USA by RDL.
www.rdlnet.com
www.rdlnet.com
Decades of Performance, Quality and Value
Decades of Performance, Quality and Value
RDL• 659 6th Street • Prescott, AZ • USA 86301 • Sales: 800-281-2683 • 928-443-9391
Tech Support: 800-933-1780 • 928-778-3554 • RDL Europe Sales & Support: (31) 20-6238-983
EZ-PD3
E
3
E
s
Power Supply Distributor
•
Distribution of 24 Vdc Power
•
Soft-Start from Switching Supply
•
Outputs may be Activated by a Front-Panel Switch
•
Up to 3 Power Distribution Points
•
Voltage Presence Indication
•
Energy Efficiency by Powering Multiple Products from a Single Power Supply
The EZ-PD3 is the ideal choice where power distribution from a current-limited switching power supply is needed. It is suitable
for powering up to three EZ modules from a single power supply.
Upon application of power, the EZ-PD3 ramps the voltage up, charging any load capacitance as quickly as possible, then switching
full voltage to the load. A front-panel power switch is provided.
The front-panel blue LED remains illuminated when the outputs are active.
TYPICAL APPLICATION
PS-24A Type Switching
Power Supply
The EZ-PD3 distributes power from a
single PS-24A type switching power
supply to up to 3 EZ products.
EZ-PD3
Z-PD
Z Product
EZ Products
www.rdlnet.com • • • www.rdlez.com
www.rdlnet.com • • • www.rdlez.com
POWER SWITCH
The POWER switch turns the rear-panel
24 Vdc power outputs on or off.
3 DC Output Cables Included
VOLTAGE PRESENCE INDICATOR
Blue LED remains illuminated when the
outputs are active.
24 VDC POWER INPUT
Connect a PS-24A type switching power supply.
(600 mA MAX)
POWER CONNECTION
Insert Power Plug
Rotate 1/4-turn
clockwise to lock
Rotate 1/4-turn
counter-clockwise
to unlock
THREE DISTRIBUTION POINTS
Use an included dc power cable between each power
output jack and input jack of an EZ product. It is not
necessary to use all three output jacks.
FIXED MOUNTING RUBBER FEET ATTACHMENT
Recess
Bottom View
of chassis
Screw
directly to flat
surface without
installing rubber feet.
Peel backing and stick the 4 rubber
feet to chassis in recesses provided.
SELECTED MOUNTING ACCESSORIES
EZ-RA6
Rack Adapter for 6 Increments of 1/6 Rack Width
EZ-CC6
Component Chassis for 6 Increments of 1/6 Rack Width
Complete accessory listing available at: rdlez.com
EZ-SMB1
Surface Mount Bezel for 1/6 Rack Width Products
EZ-UCB2
Under-Counter Brackets 1/6 or 1/3 Rack Width
TYPICAL PERFORMANCE
Input/Output Voltage: 24 Vdc @ 600 mA (Intended for use with current limited switching supply)
Outputs (8) : Total load current must not exceed 600 mA
Indicator: POWER LED
Power Requirement: 24 Vdc @ 20 mA plus connected loads
Ambient Operating Environment: 0° C to 50° C
Warranty: 3 Years; contact RDL technical support department for assistance
Case dimensions: 2.9” (7.4 cm)W x 3” (7.6 cm)D
Mounting size: 1/6 rack width
EZ-DC1
Desktop Chassis 1/6 Rack Width
EZ-SD1
Storage Drawer 1/6 Rack Width
Use In Place of Filler Panel
Holds Adapters and Cables
Mounts in EZ-CC6 and EZ-RA6
Copyright © 2010 Radio Design Labs, Inc. RDL, Radio Design Labs and the RDL logo are registered trademarks of Radio Design Labs, Inc. Data reflects product at publication time, subject to change without notice. “Made in USA” applies to all EZ products except power supplies.
891-1650
Loading...